Dash speakers

There r 4 wires going to the dash speakers I'm replacing the speakers so what wires do I splice to

 

https://www.tundras.com/forums/audio-video.30/
Take a gander through here. you might easily find your answers

 

https://www.tundras.com/threads/replace-front-dashboard-factory-speakers-on-tundras.51627/

Check out this thread. I reused the factory harness and soldered them onto the replacement speakers. If I recall correctly, there are only 2 wires going to the replacement speakers. Pretty easy once you remove the factory speakers, you will see what wires attach to the speaker's + and - , then do the same on the new ones.

 

Might get in touch with james and see if you can get the harness so you dont have to splice anything.

 

That is what I did, ordered them this weekend.
I could make the OEM connectors work, but I'd rather just use his adapters.
Makes it easier to stick all the stock stuff back in if I sell or trade the truck.

But just in case anyone needs this:
Let's you know which wire is which (+ -) (L R).
I can email anyone these scans if they need them bigger..
2015 non-jbl dash speaker wiring schematic.