What have you done to your 2.5 gen Tundra today?

Added 5 Baja designs pods, switch pro 9100, evil mfg 3rd brake light

 

Did you have to do a BMC?

 

No, 275/70 are a little over an inch taller than stock.
This post has a lot of info on tire sizes.
https://www.tundras.com/threads/official-tundra-wheel-and-tire-setups-pics-and-info.95/

 

new to this forum and Tundra ownership. Been reading up on the Tundra and many of the mods. Great info here. I have done some work on my recently acquired 2015 TRD Pro Crew Max.

Installed a Front Runner racks front and rear. Went with Front Runner since I have that rack on a Land Cruiser also.
Installed a Bed slide because it is pretty handy, I built one for my SUV to handle having the dog kennels at the back and putting gear behind.
Installed new lighting to the ARE cap since the existing was not working
Brought power to back end to run whatever
Installed a Pop&Lock to lock the tailgate via remote.






Just don't judge how cramped the garage is.

 

No judgement. At least you have a garage!

 

It's only cramped because the Tundra is Big!

 

Installed my Coachbuilder Shackles and shims.

 

Added some 3D tailgate letters, gave it a wash followed by some Bead Maker, then put in an X2 AGM battery with some SDHQ terminals.

 

where in Georgia are you located ?

 

Canton

 

Nice !! Plan on moving there or Woodstock area within the next year and a half. My brother in law lives in Canton and my father in law lives in Woodstock !
do you know where Towne Mill subdivision is in Canton ?

 

Canton/ Ball Ground is a better choice. Woodstock is getting too crowded.

 

what size shackle did you go with? I did a +3, but I may have to go with a +2 or +1 once I put my C4 hybrid bumper on this weekend.

 

Not to it, but for it this coming weekend.

 

I did one .5inch shim up front and +2 shackles. There is not a whole lot of rake, but enough I think.

 

Mean! I’ll have my ssbuilt bumper this weekend. Have a link for that brake light?

 

Where did you get those letters? That's what I'm looking for.

 

Towne Mill is nice. Its literally the subdivision next to mine across the reservoir.

 

Amazon.
I think the company is called Auto Pro accessories.

 

here ya go


https://www.evilmanufacturing.com/lights/dirt-kartel-2007-toyota-tundra-3rd-brake-light-mount

 

Thanks!

 

Just ordered mammoth guards! Can’t wait for them to get here!!!

 

Go for it man. It wasn't bad at all. I read a few threads on here about all the problems that people had run into, so I knew what I was up against. I started out with the battery disconnected. Got the dome light done first because it seemed easiest. Vanity mirrors next. On to the Footwell.......first snag here. The base of the LED was just a hair too big for the socket. I couldn't tell if it was in correctly or not, so I reconnected the battery. No light......kept fooling with it, and finally got it to go in, but when it finally went, it deformed the base (of the LED) and caused the fuse to blow. No biggie.....had to run some errands, so I picked up some fuses while I was out. Reshaped the base of the LED with a pair of pliers and finally got it to go in no problem. On to the front map lights....passenger side, no trouble at all. Driver's side, I had the issue where the bulb socket ended up getting pushed up into the housing. Had to remove the whole overhead console to fix it, but really wasn't any trouble. After reading the couple of write-ups on here about the common issues, I was prepared for the trouble that I might have. Even with the issues I had it only took me probably 45 minutes to all of the interior lights (not including the trip to pick up fuses). Still gotta do the cargo lights over the bed. It's really not a difficult job at all.

 

Order these to install whenever you do the cargo lights.
JDM ASTAR 1200 Lumens Extremely...

$25 JDM ASTAR Extremely Bright 144-EX Chipsets 7440 7441 7443 7444 992 White LED Bulbs with Projector For Backup Reverse Lights

https://www.amazon.com/dp/B00NPIYDWU?ref=ppx_pop_mob_ap_share

 

The FireFly's kit came with the bulbs for the cargo light. I just didn't end up getting around to it.

 

ive been following that thread a while. i want one, but cant get away from the random problems that pop up. also i assume you need a hot spot to get the full use out of it? i mainly want to get waze, pandora and torque on my head unit.

 

You can mirror your phone via car play/Android auto but I feel like you're wasting the potential of these heads doing that. Let the headunit run the apps. I have my note 9 set up so when it connects to the dasaita's Bluetooth it turns on the hot spot. When Bluetooth is disconnected, it turns the hot spot off.

 

have you been over any rough roads with it? does it shake or vibrate? it looks front heavy. i hate how the replacement head unit brackets are all flimsy plastic now.

 

I didn’t get any pictures, but I installed JDM ASTARs for front turn signal (no load resistors required), TRD shifter handle, TRD airflow accelerator, and an AFE Dry S filter.

 

Nothing too rough as of yet but I have yet to notice any vibrations from it. I have the rotating head unit which seems to have very little movement side to side or up and down. It almost sits flush against the dash.