offset info needed

Hey I'm new here I'm looking for a little help on the offset i need i have a 2007 tundra with a 3 to 1 leveling set up . Did have gear rims with the wrong offset so it was chop cop so my truck could turn oh my tire size is 325/60/20 .was running duratracks but my son talked me into BF GOODRICH same size 325/60/20 and then i sold my gear rims..then toyota puta new frame under my truck due to the frame recall on the 2007 frames had 33's put on it 0 offset it rubbed they did chop chop again which ticked me off never asked but thats another nightmare now I'm back to my stock rims 20'' with spacers 325/60/20 not gonna lift my truck so any help i would appreciate

 

Welcome,
1. What's your question?
2. in the forums/ wheels and tires you will find everything about tires, lifts and offsets, I believe 305/50/20 is the biggest you can go without lift.

 

no ive been running 325/60/20 for about 10 years but offset was wrong i have 3 inch leveling
had duratracs on gear rims with 18 offset like i said rubbed bad but chop chop now i sold them
and wanna buy new rims but have no clue of true offset i need so i need offset

 

Go with a higher than +18, +25 might give you a 1/4".

 

thats what i thought but i asked some guy that works in a tire shop about it ..told him i was interest in buying rims
when i said i was interested in +25's told me nahhhh more like 0 or -25's was pretty sure he didnt have a
clue what he was talking about .Thanks i just wanna be sure

 

What's this chop chop business?

 

you are correct, that guy doesn't have a clue what he's talking about unless you want the tire to stick way out. A zero offset would stick out about 1 1/4 inches and a -25 would be 2 1/4 inches.

 

0, -25 will stick out some more, therefore your going the outside part of your tire will rub when turning.

I had 275.65.18 18x8 +60 no rub stock suspension
Installed, 18x9 +12 rubing while backing up stock suspension
Installed 2" level kit + 5100 bottom setting. 2-3" level no more rub.
Installed 295.70.18 had to move bumper .5 forward, removed bumper flaps, removed mud guards, still rubs. If I have +18 or +25 it would have been perfect.
Someone with 295.70.18 18x8 +60 100% no mods, no rub.

What size spacer do you have? OEM is +60, 1" spacer = 25mm 60-26= +35 offset 1.5=37.5, 60-37.5=22.5 offset. Turn your wheel up to the point it's close to rubbing and measure.

 

Question is how aggressive do you want your tires to be. The farther the tire stick out the lower the offset, but wait that's not all. Your tire size will play in here as well. Do you have fender flares ?

 

@ddanser
This might help.

 

oh chop chop.. i was first sold my duratracs on 18 offset but my truck couldn't turn either way so the guy chop chop n we took the mudd flaps off along with the bumper being pulled forward a bit so i ran my truck put second set on after 150000 miles next set almost another 150000 miles then toyota did the recall bit...went to a place called finishline they put 33's on 0 offset guaranteed no rubbing yeh ok haha back it went they whacked my new frame with no call to me no more rub but i hated the smaller tires so the rims n tires went back and their compensation to me for whacking a frame that wasnt even a month old was a 60$ wawa gift card now im back with my stock rims with spacers n my 325/60/20 wanna get some nice rims again ..my truck's my baby i have 374000 miles on it every one i put on it myself ...

 

my leveling is 3inch would perfer tires to stick out some what trying to find out the spacer size i believe there 2"
my son put them on for me till i get new rims my tires still rub a bit on the passenger side

 

Well I have no spacers, a 3” leveling kit, and 18x9 wheels with a +25 offset. The tires are 285 70R18 and they stick just outside of the wheel well. No rubbing no chop chop

 

so u think +25 offset with my 325/60/20 will work ?

 

I think someone is playing a little game, chop chop wawa

 

You have a wide tire that’s really your issue 18 to 25 offset should work

 

Thanks for ur help
N no I’m not playing a game to the guy who thinks I am ..I kept all the paper work even contacted a lawyer about what was done by FinishLineShop to me also Shore Toyota was much help by giving me the paperwork on the cost of new frame over 15000$... NO GAMES don’t appreciate ur insult

 

Don't be so sensitive chop chop wawa.

 

My bad just the whole ordeal with them pisses me off