What have you done to your 2.5 gen Tundra today?

Thanks Mike! It was too cold to wash, but not too cold for a mod that day. Ha.

 

How did you wire your grill LEDs? I wired them to the parking lights.

 

Haha, I can definitely relate. When it's really cold the laziness kicks in when it comes to cleaning. When it comes to adding a mod it can never be too cold. I hear ya brother. Truck looks great.

 

I wired them to an ignition fuse. 7.5A under the hood, so they’re on always.

 

Got my NSV light bar finally working the way it's supposed to and here are some Show & Tell photos...

Exterior with BD SS-WC:


Low Beams Only:


Low Beams with BD SS-WC Fogs:


High Beams with NSV Light Bar & No Fogs:


**I couldn't be happier! Thank you to @mtTundra and @Headlight Revolution for the help and patience with this procedure!

 

Gave it a quick wash to get the salt off.
Removed the transmission pan bolts and reinstalled with never seize before they actually seize.
Got a used black radio bezel.

 

Show us that bezel installed when you can!!

 

175 is the claimed weight, mine was 171 with brackets

 

I think Jones also had a winch on his...

 

maybe I didn’t explain correctly. I have a set that say tundra installed in my front door sills that are way too long. I tried them on the rear before sticking them down on the front to make sure I didn’t get the wrong ones, they were still too long for the rear. I do not have rear door sill protectors. Just these “front” ones that say the word tundra and are way too long with no lip. You can see in the front of the protector where I trimmed to make a lip to fold over the edge.




Edit: Figured it out. I just checked part numbers and apparently I got a set of regular cab sill protectors. SMH. I guess the trucks are that different..

 

I was going to paint mine......maybe it's easier this way.
Looks nice, can't wait to see the install.

 

Gotcha, now I see what you're saying. See even without us totally being on the same page I was still right being a part number thing. The streak continues and wifey will be happy to know I'm still never wrong lol. Glad u got it figured out and wish u luck on the application going forward.

 

Out with the Silver, in with the black. I love it! It’s more dark charcoal than black and matches the trim above the glove box door. The whole procedure took about an hour. Very happy with it.

 

NICE..... my hybrid bumper is at the powder coaters waiting for it's black satin finish. I went without the hoop and similar light and winch setup. I got the Rigid SAE SR 30" and the Warn VR EVO 12s. Going to use the factory Rigid fogs and a set of Rigid D series amber floods. I'm worried that after the install my front end will be sagging like an old woman's front end

 

All depends on your suspension setup. After doing the math. The bumper weighs 170lbs, winch weighs 80, led bar is 10 lbs and the 4 D2s are probably like 2-4 lbs. so about 260-270lbs. I swapped my 600lbs springs for 700lbs and it supports the weight with ease.

 

Its 43 degrees outside and too damn cold to be doing this install but I've put it off too long already...

 

My son and I did the easy trails at Big Bend and had a lot of fun. Definitely want to go back.

Not sure if they’re open now, but back in the 80’s and early 90’s we used to do some of the trails around Wakulla Springs south of Tallahassee about 3 hours from you.

I have the Bilstein 6112s and may want to go with the Icons when it’s time to replace them. How much lift did they provide?

Your setup and plans are close to mine. Definitely interested in the ARB twin compressor, sliders and front and rear bumpers for my own needs.

Post pics when you get your stuff!

 

Which brand of springs did you go with?

 

And I need to do this.

Love the look.

 

Thanks! I might have to redo mine now. Lol

 

It looks great black OEM, but this is the reason mine stays silver lol. I'm more of a blunt force beat things or cut things that don't separate type of guy, I think it's pretty safe to assume I'd end up with broken tabs everywhere lol.

 

I have kings shocks so I stayed with kings.

 

Grabbed a Pro skid for $200, then added a little bedliner. Can’t wait to install this thing.

 

JDMCar center console organizer. Fits perfectly out of the box into the sender console on the 17’ CM. Great item for under $30

$31 JDMCAR Compatible with Toyota Tundra Accessories 2014-2021 Center Console Organizer, Insert ABS Black Materials Tray, Armrest Secondary Storage Box - Full Tray

JDMCAR Center Console Organizer Compatible with 2014-2019 2020 Toyota Tundra Accessories, Insert ABS Black Materials Tray, Armrest Secondary Storage Box - Full Tray

 

Got the Wilco vertical tiregate on.

 

baller!

 

After doing the DIY under back seat mod, I wanted some more storage behind the back seat to store Things like hats, gloves, etc. I like the Tactical look but did not like the price. Bought this cheap behind the seat storage and will try it out. I can add extra pounches and things if needed.

 

Did this a couple weeks ago but here are the pics as promised

Cut up my organizer to fit

Added a tray for more storage that doesn’t need to be locked up

 

Like the grille with the raptor lights. How did you paint the bulge? Or did you buy an OEM bulge that color which matched the grille surround?

 

That looks awesome!