1. Welcome to Tundras.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tundra discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Tundra owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Kilo’s ‘17 Pro Build

Discussion in '2.5 Gen Builds (2014-2021)' started by Kilos, Oct 31, 2016.

  1. Oct 31, 2016 at 8:54 PM
    #1
    Kilos

    Kilos [OP] YotaPro

    Joined:
    Oct 21, 2016
    Member:
    #4952
    Messages:
    260
    Gender:
    Male
    First Name:
    Brett
    AZ
    Vehicle:
    2017 TRD Pro Barcelona Red
    Icon Stage 6 suspension Method NVs matte black w/Toyo Tires 35x12.5s SDHQ Sliders Cab mount chop Precision LED interior lights (6000k) GTR reverse LEDs 20% acrylic tint (heat resistant) Inyati spray in bedliner Black TRD Pro bed inserts Vivid Racing Leather wrapped steering wheel AJT Designs TRD shift knob AJT key fob Morimoto LED fog lights Full JL Audio sound system upgrade Kenwood 995S HU
    After owning three other Toyotas, two FJs (2007 and 2010) and a 4Runner (2014), I decided I wanted a V8. All three were great vehicles, just underpowered. I thoroughly enjoyed driving each one of them, minus the V6s. I had no real intention of trading in my 4Runner, but I was at the dealer getting it serviced and saw a magnificent 2017 TRD Pro Tundra in Barcelona Red. Naturally, I asked to test drive it while I waited on my 4Runner. Big mistake... I knew I was going to drive away in that Tundra as soon as I hit the gas pedal getting on the freeway. The sound and power were too much to say no to! After about an hour of negotiating, I struck a deal and started the paperwork (paid a little under MSRP, no markup). I was also successful in getting the dealer to swap the factory tires for a set of Nitto Terra Grappler G2 275/70s at no cost (winning!).

    I drove it around with little to no changes for about six months. Then I found www.tundras.com. My bank account hates me, but my truck and I love this forum!

    Here's what I've done so far:
    • TRD Pro bed stamp Inserts, piano black
    • Inyati spray-in bedliner
    • AJT shift knob and key fob
    • Salex console organizer and tray
    • Precision interior LEDs 6000k
    • Morimoto Fog Lamps (removed)
    • Red "TUNDRA" letter stereo inserts (removed)
    • Full JL Audio speaker upgrade and sub
    • Sound deadening on doors and rear cab panel
    • TRD Rear Sway bar (removed)
    • Kenwood DXN995S HU
    • Headlight Revolution Gen 3 LED headlight bulbs (removed)
    • Headlight Revolution back up LEDs
    • SDHQ powder coated sliders
    • Vivid Racing steering wheel w/red stitching
    • Toyo 35x12.5 tires
    • Method NV 18in wheels
    • Icon Stage 6 suspension, with billet aluminum UCAs
    • SDHQ billet ABS Guards
    • Cab mount chop
    • ARB Air Compressor (twin suitcase style) and tire deflator
    • Ronin .50 caliber stubby antenna
    • Baja Designs Sport Fog Lights, clear
    • 2019 TRD Pro LED headlights from @Roman with @iHacker harness
    • 4.88 Nitro Gears, w/REM polishing
    • Ceramic coating
    Here are future mods I'm looking at:
    • Big brake kit and pads
    • Front Bumper, N-Fab or ADD
    • Rear bumper, TBD
    • LED Light bar, behind grille
    • A-Pillar LEDs
    • Switch Pros
    • Recovery gear
    The day I brought "Stella" home:
    IMG_2556.jpg

    As Stella sits today (minus the LED headlights and Baja Designs fogs):
    fp6gAYtOQxeEmlctJGEBAg.jpg
    C1C0C5DD-115B-4EB2-A13A-37085B1E672F.jpg
    Barcelona Red in the shade:
    fullsizeoutput_fe3.jpg68D19E61-2157-4AC4-926A-98A99682B9F2.jpg
     
    Last edited: May 4, 2019
  2. Oct 31, 2016 at 8:58 PM
    #2
    Royalpeeps

    Royalpeeps Awesome!!!

    Joined:
    Oct 18, 2016
    Member:
    #4913
    Messages:
    512
    Gender:
    Male
    First Name:
    Chad
    Colorado
    Vehicle:
    2017 Blazing Blue Pear Tundra SR5 TRD Package
    20" Fuel Vapor wheels 35" Toyo A/T II Tires 3 inch Toytec Boss kit with SPC UCA NFAB Wheel to Wheel Black Textured Nurf Bars OCD Center Storage Organizer and tray
    Looks nice bro.
     
    Kilos[OP] likes this.
  3. Oct 31, 2016 at 9:52 PM
    #3
    zcarpenter92

    zcarpenter92 Yotas and Yellow Jackets

    Joined:
    Feb 16, 2015
    Member:
    #973
    Messages:
    5,255
    Gender:
    Male
    First Name:
    Zach
    NE Colorado
    Vehicle:
    2008 Desert Sand 5.7L DC
    In sig
    Lookin forward to this!
     
    Kilos[OP] likes this.
  4. Nov 4, 2016 at 3:43 PM
    #4
    tmcclinton04

    tmcclinton04 New Member

    Joined:
    Sep 23, 2016
    Member:
    #4641
    Messages:
    7
    Gender:
    Male
    Vehicle:
    '14 Tundra SR5
    Looking good man. Can't wait to see what you've got in store for it
     
    Kilos[OP] likes this.
  5. Nov 4, 2016 at 4:24 PM
    #5
    TexasMofo

    TexasMofo New Member

    Joined:
    Sep 24, 2016
    Member:
    #4654
    Messages:
    334
    Gender:
    Male
    First Name:
    Chad
    Great Country of Texas
    Vehicle:
    2017 Toyota Tundra TRD Pro
    Illegal Tint 2 Shims/ 3 inch Shacke
    Liking that color. Need to order those trd pro stickers on Amazon.
     
    Kilos[OP] likes this.
  6. Nov 4, 2016 at 6:48 PM
    #6
    Kilos

    Kilos [OP] YotaPro

    Joined:
    Oct 21, 2016
    Member:
    #4952
    Messages:
    260
    Gender:
    Male
    First Name:
    Brett
    AZ
    Vehicle:
    2017 TRD Pro Barcelona Red
    Icon Stage 6 suspension Method NVs matte black w/Toyo Tires 35x12.5s SDHQ Sliders Cab mount chop Precision LED interior lights (6000k) GTR reverse LEDs 20% acrylic tint (heat resistant) Inyati spray in bedliner Black TRD Pro bed inserts Vivid Racing Leather wrapped steering wheel AJT Designs TRD shift knob AJT key fob Morimoto LED fog lights Full JL Audio sound system upgrade Kenwood 995S HU
    @TexasMofo I bought the ABS plastic inserts, a little more expensive but appear to be higher quality and I have to believe they will hold up to the elements quite well.
     
  7. Nov 4, 2016 at 7:10 PM
    #7
    TTU19

    TTU19 Wreck 'Em

    Joined:
    Jul 19, 2016
    Member:
    #3918
    Messages:
    2,216
    Gender:
    Male
    First Name:
    Wes
    Tx
    Vehicle:
    2021 TRD Sport
    Gotta love that color!
     
    Kilos[OP] likes this.
  8. Nov 4, 2016 at 7:40 PM
    #8
    R-C

    R-C http://101financial.com

    Joined:
    Aug 9, 2016
    Member:
    #4151
    Messages:
    206
    Gender:
    Male
    First Name:
    Ryan
    Las Vega$
    Vehicle:
    2017 TRD Pro
    Finally, another red pro! Looks great
     
    Kilos[OP] likes this.
  9. Nov 4, 2016 at 8:01 PM
    #9
    TheBeast

    TheBeast The Beach

    Joined:
    Apr 27, 2016
    Member:
    #3246
    Messages:
    12,518
    Gender:
    Male
    SoCal
    Vehicle:
    2012
    looks great. Honestly not much left to do on a TRD pro
    you got better tires and bed liner, LED inside. good to go !..enjoy it
     
    Kilos[OP] likes this.
  10. Nov 4, 2016 at 9:36 PM
    #10
    TexasMofo

    TexasMofo New Member

    Joined:
    Sep 24, 2016
    Member:
    #4654
    Messages:
    334
    Gender:
    Male
    First Name:
    Chad
    Great Country of Texas
    Vehicle:
    2017 Toyota Tundra TRD Pro
    Illegal Tint 2 Shims/ 3 inch Shacke
    Amazon?
     
  11. Nov 4, 2016 at 9:43 PM
    #11
    aperezsh

    aperezsh Blessed are the peacemakers

    Joined:
    Dec 31, 2015
    Member:
    #2349
    Messages:
    2,222
    Gender:
    Male
    First Name:
    Ali
    cal-exit landed in GA
    Vehicle:
    16 Tundra SR5 4x4 Crew Max Magnetic Gray Metallic
    A little this and that...Broke now
    Good stuff looks great
     
  12. Nov 5, 2016 at 4:07 PM
    #12
    Kilos

    Kilos [OP] YotaPro

    Joined:
    Oct 21, 2016
    Member:
    #4952
    Messages:
    260
    Gender:
    Male
    First Name:
    Brett
    AZ
    Vehicle:
    2017 TRD Pro Barcelona Red
    Icon Stage 6 suspension Method NVs matte black w/Toyo Tires 35x12.5s SDHQ Sliders Cab mount chop Precision LED interior lights (6000k) GTR reverse LEDs 20% acrylic tint (heat resistant) Inyati spray in bedliner Black TRD Pro bed inserts Vivid Racing Leather wrapped steering wheel AJT Designs TRD shift knob AJT key fob Morimoto LED fog lights Full JL Audio sound system upgrade Kenwood 995S HU
  13. Dec 12, 2016 at 9:20 PM
    #13
    Kilos

    Kilos [OP] YotaPro

    Joined:
    Oct 21, 2016
    Member:
    #4952
    Messages:
    260
    Gender:
    Male
    First Name:
    Brett
    AZ
    Vehicle:
    2017 TRD Pro Barcelona Red
    Icon Stage 6 suspension Method NVs matte black w/Toyo Tires 35x12.5s SDHQ Sliders Cab mount chop Precision LED interior lights (6000k) GTR reverse LEDs 20% acrylic tint (heat resistant) Inyati spray in bedliner Black TRD Pro bed inserts Vivid Racing Leather wrapped steering wheel AJT Designs TRD shift knob AJT key fob Morimoto LED fog lights Full JL Audio sound system upgrade Kenwood 995S HU
  14. Dec 12, 2016 at 9:56 PM
    #14
    MotoTundra

    MotoTundra The Ocho

    Joined:
    Jan 6, 2014
    Member:
    #8
    Messages:
    7,645
    Gender:
    Male
    First Name:
    Don
    -TRS Mini D2S Retrofit on TRD Pro Headlights (Apollo 2.0 Shrouds, 35w XB Ballasts, 5500k Bulbs) -Baja Designs Squadron R Sport Aux lights. -TRD Pro Grill -TRD Rear Sway Bar -BakFlip VP Tonneau w/BakBox -Dipped wheels & bumpers -Iron Cross HD steps -Undercover Swingcase -SunTek Paint Protection film -Tinted glass -Bedmat -OEM Towing Mirrors
  15. Dec 12, 2016 at 9:58 PM
    #15
    CaptTyler

    CaptTyler Life’s too short to have an ugly boat.

    Joined:
    Jul 23, 2015
    Member:
    #1561
    Messages:
    1,461
    Gender:
    Male
    First Name:
    Tyler
    Florida
    Vehicle:
    2018 Ram 2500 Cummins
    Very nice work. Very clean.
    IMG_0807.jpg
     
    ColoradoTJ and Kilos[OP] like this.
  16. Dec 29, 2016 at 5:48 PM
    #16
    Kilos

    Kilos [OP] YotaPro

    Joined:
    Oct 21, 2016
    Member:
    #4952
    Messages:
    260
    Gender:
    Male
    First Name:
    Brett
    AZ
    Vehicle:
    2017 TRD Pro Barcelona Red
    Icon Stage 6 suspension Method NVs matte black w/Toyo Tires 35x12.5s SDHQ Sliders Cab mount chop Precision LED interior lights (6000k) GTR reverse LEDs 20% acrylic tint (heat resistant) Inyati spray in bedliner Black TRD Pro bed inserts Vivid Racing Leather wrapped steering wheel AJT Designs TRD shift knob AJT key fob Morimoto LED fog lights Full JL Audio sound system upgrade Kenwood 995S HU
    IMG_2724.jpg
    Morimoto fogs installed. Sway bar and full audio upgrade are next!
     
    dcsleeper408 likes this.
  17. Dec 29, 2016 at 7:17 PM
    #17
    TexasMofo

    TexasMofo New Member

    Joined:
    Sep 24, 2016
    Member:
    #4654
    Messages:
    334
    Gender:
    Male
    First Name:
    Chad
    Great Country of Texas
    Vehicle:
    2017 Toyota Tundra TRD Pro
    Illegal Tint 2 Shims/ 3 inch Shacke
    How much better are they than stock?
     
  18. Dec 29, 2016 at 7:39 PM
    #18
    Kilos

    Kilos [OP] YotaPro

    Joined:
    Oct 21, 2016
    Member:
    #4952
    Messages:
    260
    Gender:
    Male
    First Name:
    Brett
    AZ
    Vehicle:
    2017 TRD Pro Barcelona Red
    Icon Stage 6 suspension Method NVs matte black w/Toyo Tires 35x12.5s SDHQ Sliders Cab mount chop Precision LED interior lights (6000k) GTR reverse LEDs 20% acrylic tint (heat resistant) Inyati spray in bedliner Black TRD Pro bed inserts Vivid Racing Leather wrapped steering wheel AJT Designs TRD shift knob AJT key fob Morimoto LED fog lights Full JL Audio sound system upgrade Kenwood 995S HU
    Much! I purposely aimed them slightly higher to fill out the factory headlight pattern. By no means are they blinding anyone, nor do they look "off." Extremely pleased with them and super easy to install/aim. With the projector lense, they are more "focused" and have exceeded my expectations.
     
    Last edited: Dec 29, 2016
  19. Jan 2, 2017 at 8:28 PM
    #19
    Kilos

    Kilos [OP] YotaPro

    Joined:
    Oct 21, 2016
    Member:
    #4952
    Messages:
    260
    Gender:
    Male
    First Name:
    Brett
    AZ
    Vehicle:
    2017 TRD Pro Barcelona Red
    Icon Stage 6 suspension Method NVs matte black w/Toyo Tires 35x12.5s SDHQ Sliders Cab mount chop Precision LED interior lights (6000k) GTR reverse LEDs 20% acrylic tint (heat resistant) Inyati spray in bedliner Black TRD Pro bed inserts Vivid Racing Leather wrapped steering wheel AJT Designs TRD shift knob AJT key fob Morimoto LED fog lights Full JL Audio sound system upgrade Kenwood 995S HU
    Alright crew, my audio build has been completed and installed. Given a bum shoulder for another few weeks, I had it installed by a local shop (KarTunes in Tempe AZ, I highly recommend using them if you're in the greater the Phoenix area or AZ). After a lot of Q&A on here, other shops, several calls to Crutchfield, and KarTunes, I finally settled on a full JL Audio system.

    Every time I get in my Tundra, I'm reminded how much I enjoy driving it. My only complaint has been the poor audio system. Until now...

    KarTunes did an amazing job on the install and helping me finalize equipment picks. Here's what we used:

    OEM EnTune Premium non-JBL head Unit
    JL Audio - Amp XD700/5v2
    JL Audio - Sub 13TW5 w/JL Audio box
    JL Audio - bass knob
    JL Audio - C2-650X two-way (rear speakers)
    JL Audio - C2-690TX three-way (front doors)
    M.E.S.A. Mat sound deadening on all four doors and the rear wall
    Amp install kit w/four gauge wiring and heavy duty fuses
    NO Line out converter (the JLA amp has one built in)

    The outcome, ZERO WHITE NOISE, even at volume "0" or "1". From there, I played/tested every genre imaginable at high volumes, NO DISTORTION whatsoever. The sound deadening matting keeps out just the right amount of road noise, allowing me to still hear the TRD dual exhaust notes. Oh, and NO rattling in the cab at nearly full volume.

    The highs and mids are perfect. In my opinion, approaching studio quality sound (I used to record guitar for side cash). The bass isn't overpowering (unless I crank the sub all the way up) and is easily adjusted for different genres and audio file types using the bass know installed next to the OEM USB input (MP3s are highly compressed, XM produces a dirty signal, and "Tidal" has hifi audiophile formats available). Given I didn't do the install myself, I only have a few pics to share. If you want better sound quality, use your USB cable, Bluetooth changes the compression.

    Other than the amazing sound quality, the best part is that it looks completely stock. Looking forward to my next road trip! I wish I could share exactly how great this setup sounds

    (pics are not of the "finished" install)






     
    Last edited: Dec 24, 2017
    1rufftrdpro likes this.
  20. Jan 2, 2017 at 8:35 PM
    #20
    Chaosx4

    Chaosx4 New Member

    Joined:
    Mar 27, 2016
    Member:
    #3016
    Messages:
    334
    Gender:
    Male
    Vehicle:
    2016 White Tundra SR5 TRD
    Looks great, do you mind if I ask how much a setup like that runs?

    Also, did you pick up a TRD Sway bar already??? I might have one up for sale in the next few days
     
  21. Jan 2, 2017 at 8:43 PM
    #21
    Kilos

    Kilos [OP] YotaPro

    Joined:
    Oct 21, 2016
    Member:
    #4952
    Messages:
    260
    Gender:
    Male
    First Name:
    Brett
    AZ
    Vehicle:
    2017 TRD Pro Barcelona Red
    Icon Stage 6 suspension Method NVs matte black w/Toyo Tires 35x12.5s SDHQ Sliders Cab mount chop Precision LED interior lights (6000k) GTR reverse LEDs 20% acrylic tint (heat resistant) Inyati spray in bedliner Black TRD Pro bed inserts Vivid Racing Leather wrapped steering wheel AJT Designs TRD shift knob AJT key fob Morimoto LED fog lights Full JL Audio sound system upgrade Kenwood 995S HU
    Yes sir, already have a sway bar (just need to install it). Should be an easy sell on here!
     
  22. Jan 2, 2017 at 8:43 PM
    #22
    Chaosx4

    Chaosx4 New Member

    Joined:
    Mar 27, 2016
    Member:
    #3016
    Messages:
    334
    Gender:
    Male
    Vehicle:
    2016 White Tundra SR5 TRD
    Agreed! Nice truck man!
     
    Kilos[OP] likes this.
  23. Mar 16, 2017 at 9:19 PM
    #23
    Kilos

    Kilos [OP] YotaPro

    Joined:
    Oct 21, 2016
    Member:
    #4952
    Messages:
    260
    Gender:
    Male
    First Name:
    Brett
    AZ
    Vehicle:
    2017 TRD Pro Barcelona Red
    Icon Stage 6 suspension Method NVs matte black w/Toyo Tires 35x12.5s SDHQ Sliders Cab mount chop Precision LED interior lights (6000k) GTR reverse LEDs 20% acrylic tint (heat resistant) Inyati spray in bedliner Black TRD Pro bed inserts Vivid Racing Leather wrapped steering wheel AJT Designs TRD shift knob AJT key fob Morimoto LED fog lights Full JL Audio sound system upgrade Kenwood 995S HU
    Sway bar installed! Huge difference on the pavement. IMG_3009.jpg
     
    dcsleeper408 likes this.
  24. Mar 16, 2017 at 10:45 PM
    #24
    Eclipsed & Floating

    Eclipsed & Floating Over it.........

    Joined:
    Feb 20, 2017
    Member:
    #6454
    Messages:
    12,527
    Gender:
    Male
    I’m right where I need to be
    Vehicle:
    Voluptuous Whitey
    Did you ever sell that sway bar?
     
  25. Jan 15, 2018 at 1:57 PM
    #25
    Kilos

    Kilos [OP] YotaPro

    Joined:
    Oct 21, 2016
    Member:
    #4952
    Messages:
    260
    Gender:
    Male
    First Name:
    Brett
    AZ
    Vehicle:
    2017 TRD Pro Barcelona Red
    Icon Stage 6 suspension Method NVs matte black w/Toyo Tires 35x12.5s SDHQ Sliders Cab mount chop Precision LED interior lights (6000k) GTR reverse LEDs 20% acrylic tint (heat resistant) Inyati spray in bedliner Black TRD Pro bed inserts Vivid Racing Leather wrapped steering wheel AJT Designs TRD shift knob AJT key fob Morimoto LED fog lights Full JL Audio sound system upgrade Kenwood 995S HU
    Next weekend’s project, installing @sdhq_offroad sliders! Picked them up in Gilbert, great shop and great guys that helped out. These things are beefy!

    4656E356-4049-4CED-A27C-A52B99CF3ACF.jpg
     
    Last edited: Dec 28, 2018
    blue16, zcarpenter92 and sdhq_offroad like this.
  26. Jan 21, 2018 at 8:05 PM
    #26
    Kilos

    Kilos [OP] YotaPro

    Joined:
    Oct 21, 2016
    Member:
    #4952
    Messages:
    260
    Gender:
    Male
    First Name:
    Brett
    AZ
    Vehicle:
    2017 TRD Pro Barcelona Red
    Icon Stage 6 suspension Method NVs matte black w/Toyo Tires 35x12.5s SDHQ Sliders Cab mount chop Precision LED interior lights (6000k) GTR reverse LEDs 20% acrylic tint (heat resistant) Inyati spray in bedliner Black TRD Pro bed inserts Vivid Racing Leather wrapped steering wheel AJT Designs TRD shift knob AJT key fob Morimoto LED fog lights Full JL Audio sound system upgrade Kenwood 995S HU
    SDHQ sliders installed.
    F8141CC5-B153-45A7-84CE-510BA1BCCDF0.jpg FC049A97-366C-4D92-A64D-ECE0F7A1FE08.jpg
     

    Attached Files:

    Last edited: Dec 28, 2018
  27. Jan 26, 2018 at 6:38 PM
    #27
    Kilos

    Kilos [OP] YotaPro

    Joined:
    Oct 21, 2016
    Member:
    #4952
    Messages:
    260
    Gender:
    Male
    First Name:
    Brett
    AZ
    Vehicle:
    2017 TRD Pro Barcelona Red
    Icon Stage 6 suspension Method NVs matte black w/Toyo Tires 35x12.5s SDHQ Sliders Cab mount chop Precision LED interior lights (6000k) GTR reverse LEDs 20% acrylic tint (heat resistant) Inyati spray in bedliner Black TRD Pro bed inserts Vivid Racing Leather wrapped steering wheel AJT Designs TRD shift knob AJT key fob Morimoto LED fog lights Full JL Audio sound system upgrade Kenwood 995S HU
    Gen 3 Headlight revolution LED headlight bulbs. Super easy install, a bit pricey but definitely worth the ease of use. 6000k temp, an exact match to my LED fogs...

    Stock bulbs and Morimoto LED fogs
    163B73AE-33A0-43EA-AE81-3A4831ABC0F9.jpg

    Comparison: driver side stock, passenger 3rd gen LED from Headlight Revolution
    51EF0666-6496-4058-954E-C1262F8F12F9.jpg

    Both LEDs installed
    8668E3AB-190F-4533-8023-8F14CEE6398A.jpg

    Front view post install
    DD9A5B64-87F1-49ED-8341-4C46CE5940F2.jpg

    Mid install, was surprised by a few things during in the process. 1) Lower clips in grille are stronger than I would have guessed 2) No need to remove bolts inside of wheel wells 3) Start to finish, only took 40 min.
    1EC1AB3D-E2BB-4E50-87B2-1744AC8F1C08.jpg

    Product link:
    https://headlightrevolution.com/201...-series-headlight-bulbs-upgrade-gtr-lighting/
     
    Last edited: Jan 26, 2018
    blue16 likes this.
  28. Jan 26, 2018 at 6:43 PM
    #28
    blue16

    blue16 New Member

    Joined:
    Feb 5, 2017
    Member:
    #6237
    Messages:
    2,817
    Gender:
    Male
    First Name:
    steve
    Mesa AZ
    Vehicle:
    2016 tundra
    Truck is looking sweet I like those sliders
     
    Kilos[OP] likes this.
  29. Jan 26, 2018 at 7:06 PM
    #29
    OceanSkyWolf

    OceanSkyWolf New Member

    Joined:
    Jan 14, 2018
    Member:
    #12207
    Messages:
    268
    Gender:
    Male
    Vehicle:
    2017 MGM CM
    BA Truck!!! How’d you adjust the fog lights?
     
  30. Jan 26, 2018 at 7:31 PM
    #30
    Kilos

    Kilos [OP] YotaPro

    Joined:
    Oct 21, 2016
    Member:
    #4952
    Messages:
    260
    Gender:
    Male
    First Name:
    Brett
    AZ
    Vehicle:
    2017 TRD Pro Barcelona Red
    Icon Stage 6 suspension Method NVs matte black w/Toyo Tires 35x12.5s SDHQ Sliders Cab mount chop Precision LED interior lights (6000k) GTR reverse LEDs 20% acrylic tint (heat resistant) Inyati spray in bedliner Black TRD Pro bed inserts Vivid Racing Leather wrapped steering wheel AJT Designs TRD shift knob AJT key fob Morimoto LED fog lights Full JL Audio sound system upgrade Kenwood 995S HU
    the Morimotos have a Phillips screw on the under side that can be used. Pretty simple with a stubby screwdriver.
     

Products Discussed in

To Top