What have you done to your 2.5 gen Tundra today?

Yes, I've seen the post, but price is TBD so that's why i'm not showing any interest yet cause I know it isn't cheap.

 

Stubby antenna.

 

Finally beginning the blackout process. Did the 4x4 badge, mirror caps, and cup holder ring on my Platinum. Mirror caps had 6 or 7 coats of Black Plastidip with 2 coats of the Plastidip Clear Coat. Loving the change so far!

 

Which trim kit is that? It looks like it makes the radio sit at an angle.

 

Went with a blue LED above “mirror buttons” since I’m gonna be installing blue LED strips in interior...connected it to my parking lights so it comes on automatically when any of my lights come on...I use the power mirrors a lot so it def comes in handy...still can’t believe Toyota didn’t illuminate them...haha

 

Replaced front grill from black surround to white. Still need to replace hood bulge and installed front and rear Weathertech’s. Next plasti dipping front bumper end covers

 

Thanks for the link. Just ordered up a kit for my 19. Nice upgrade!

 

Well, there’s my next rainy day project. Looks awesome!

 

Thanx for this. Some of us non teckies need a video. Im gonna try this update. Is there a max size of the JPEG?

 

No prob!...well worth the $20, enjoy!

 

AJT vent cover rings are nice. Led lighting cup holders fun and cheap.

 

@Jim LE 1301 how much more of a discount can he give you over 30% and free shipping. I have the item in the cart ready to go.

 

Did you send Mike @eccracer104 a PM, he's the only one who can answer that question?

 

Cut open one of the tail lamps and removed most of the chrome.

 

That looks awesome! Did you paint/plasti dip the chrome or were you actually able to remove it? How hard were they to cut open?

 

Not hard to cut open at all. I sanded and painted the areas where I did not want to see the chrome anymore.

 

What you do/use to seal up?

 

Are those the leather ones?

 

I have not done that yet, I’m looking at few different 3M products.

 

No, they are the Neosupreme by Coverking.

 

Peregrine just landed.

 

I see the 275/70/18 Ridge grapplers! This is what I'm going to run in the coming month with some Fuel Vectors, how much of a mileage hit did you take? Thoughts on the road noise?

 

NO, my radio has like 6 angles it can be saved as. it's pretty cool, but i'm just using the Sosche Double din listed below for 45.99.

 

I lost about 1.3 mpg after the tires and front lift. I’m impressed with road noise. The only time I notice a difference is high speeds, windows down. Very happy with the ridge Grapplers so far.

 

Picked up a Dometic CFX28 and a GoalZero Yeti 400 Lithium to put in the truck for camping and extended road trips/tailgating. Amazon had the fridge for about $140 less than everyone else (it's now $2 cheaper on Amazon than what I paid last week) and REI had a 20% off coupon for any full price item so that was another $120 off the retail price of the Yeti.

From my initial testing it looks like i'll get about 48 hours of running the fridge off the Yeti 400 with 72F outside temp and the fridge set to 39F. In the spring i'll pick up a 100 or 200W solar briefcase to keep it topped up when camping and not running the truck.

 

Just purchased this 2016 double cab a week ago and today added some 285/70/18 EXO Grapplers as well as 1.25" Spidertrax wheel spacers. Really stoked on the build so far and tires did great on the ice covered logging roads.

 

Fuel Contra wheels with the OE tires

I wish I would've argued harder for black wheel flares, but I hope to get over it

 

So you're saying you can adjust the angle of the screen? Which model is that?

 

you will be glad you have white, black fender flares only belong on black trucks

 

I ordered my Exo Grapplers (same size) 2 days ago. Have to wait until next week to get them installed because people rather eat turkey than work