Trd pro rear suspension

I have the 2019 tundra limited trd off road package 4x4 and know that the trd pro in the front is 2”, so how high is the rear end compared to the rear end on my limited?

 

The same depending on tire size. Pro's are simply lifted 2" in front.

 

Okay, I ordered toytec eibach 3” front lift with Toyo open country MT 295/70/18 on stock rims and am worried that the rear is gonna sit terribly stock.

 

Yes it will. 6112 top setting (2wd here so i got more than the 2.5 lift), toytec on 1.5 in rear with airbags and cradles. I do have a small rake with 38 gallon tank full. 295-70-18 and no trimming.

 

Pro's have 2" up front and 1.5" in the rear

 

Nope. Same leaf springs on all models. The shocks are longer so you do get more droop. which is why you get an ABS wire bracket extension. But it rides at the same height in the back as any other Tundra that year.

 

False. Pros have 2” in front and no additional lift in the rear.

 

So I went with the 3” lift up front with Toyo mt 295/70/18.. what do you think I should do in the rear to bring it up a little but still have the front sit a little higher? Shims, blocks, or?

 

Shackle. Or reset your 6112 to middle setting. I have 6112 front at middle and 5160 back and when loaded with gear back sags. No load I am level to slight rake. Suspension has been on almost two years.

 

Nice! What size tires?

 

Shackles, Deaver leaf pack like k37's (u748's for extra weight) with aftermarket rear shocks will do wonders to the ride quality and provide about 2in's of lift.

 

I had the Toytec 3” coil overs with 1.5” blocks in the rear...sat perfectly level. 35x12.50 on 18” Method wheels at +0 offset. Just trim the body mount.

 

Stock size on TRD Off Road.