What have you done to your 2.5 gen Tundra today?

Found some time to get a Switch Pro 9100 installed along with some LED ditch lights off Amazon and a Rough Country 30" LED bar in the bumper (the blueish LED lights in the photo by the bottom of the windshield is my iPhone camera being weird .. they don't exist). This definitely didn't happen in one day but i'm very happy with the results. Hardest part of the install was getting the damn bumper nuts off to mount the light bar brackets. I think Toyota torques those down to 300 lb/ft and the layer of mud that dried on top of the threads didn't help either. I was also out of PB Blaster so I need to remember to get more.

For now the Switch Pro panel is surface mounted but I might cut away more leather and plastic to get it to fit flush but that's a next spring/summer project. For now it looks fine and is easy to reach so i'm happy (and yeah my drill holes weren't 100% aligned so it's slightly angled towards the driver for easier use. That's a win!). SDHQ wants $180 for their pre-cut console piece in brown leather which I might consider buying if it didn't have their huge logo all over it. Still a bid spendy though when the black leather version is $120.

I also spray painted the uber-reflective cup holder surround black last weekend and replaced the puddle lights with LED's (the factory ones are so dim I didn't even know I had them until I saw someone mention them on here). Might have to get some vent ring covers next so I can see when I drive on sunny days but mostly the interior reflections were from the cup holder. I don't mind the chrome outside on the truck but it really doesn't belong in the interior.

Next mod is some LED strips for the inside the truck bed which should arrive tomorrow and then finding stuff to use the other 6 SP9100 buttons for!

 

Yup

 

Look like my wheels...and I’m trying to be different

 

Looks great!

 

Is there a write up for this? I was thinking about doing the same.

 

Just ordered a X2 Battery 27F
20% off and $20 MIR.
Batteries +

 

Sweet Double Cab. New to the forum, will post my Inferno DC soon.
What size, brand tires you running here? Im about to upgrade from my stock tires with 53k on them and I like this look. Are you running stock suspension?
You might've just sold me on the tow mirrors as well, so my bank accounts thanks you for that.

 

Best Batteries one can own for a truck! And a great deal!

 

I also have the diamond back it is awesome. But I do see the need to put those LED lights on it. What hardware did you go with and did you make it like your hood? Turn on when opening or did you wire it to your lights

 

Welcome from NY.

 

Might look good if you took the stickers off in between the front and rear windows. Just a thought that green may look good

 

That dash section came straight off of Amazon. As for the wireless charger just search it there are tons of write ups.
https://www.tundras.com/threads/wireless-charger-in-center-console-diy-2014-tundra.18365/

 

Installed the pro grill, tried he cheap ebay cover for the sensor it fits and looks ok but it is too thick, the radar isn't working on my cruise control so I ordered the OEM. Also installed the drivers side grab bar... on the grab bar you have to add a clip nut to the lower as there are no threads and provide you old bold and washer, just pulled that stuff out of my hardware bin.

 

Some of you will cringe, but I put the rear sway bar on my Pro. I don't regret it one single bit.

 

I'm getting these exact tires and size put on next week. How do you like them?

 

Got my tpms to work today. I have 275/65/18 E rated tires and was running them @60psi. Called Nitto Tire and asked them the proper psi for my truck and they told me 42 front and 45 rear so that’s what I lowered them to and now my sensors are working. Who would of known if u run too much pressure they won’t read it

 

FRAC V2 and HD camera installed. Super easy. Took me an hour only because i am OCD with cable management

 

What camera did you go with?

 

NATIKA Backup/Front View Camera,IP69K Waterproof Great Night Vision HD

 

Installed some LED strips for the bed tonight. Mounted the switch in the existing hole and I’m going to wire it to the trailer harness tomorrow (I’m fine with them only working with ignition on). Had to make a wooden washer with the lasercutter so the switch would fit well (and it's a 1794 so more wood is good!). If anyone is looking for one the link is https://mattgeckoleds.com/shop?olsP...dra-led-bed-light-kit-with-bed-mounted-switch.

 

Looks awesome! What bed net is that? I need that in my life.

 

It's some generic Amazon truck net that my wife got me for my birthday. I'll get the link to it when she get's home and let you know. It comes with some cheapo carbiners and I used those to mount them to some adjustable rings I have in the bed track system. Seems to work pretty well though!

Here's the link to the net she got me:

$18 Three Pocket Envelope Truck Cargo Net Fit for Toyota Tundra 4runner Matrix 2012-2018 Cargo Organizer Storage Net

https://www.amazon.com/dp/B07JDQXLLT/ref=cm_sw_r_sms_awdb_t1_auQJDbC6WMRJX?pldnSite=1

 

Pretty clear.

 

I’ve haven’t logged on in forever!

All I’ve done today is wash it. But last week I had a couple 10” subs and amp installed along with a hidden safe in that dead space in the floorboard under the passenger side back seat. Pretty excited about that mod. Much better than a console safe IMO. Although a bit more inconvenient to get to. I’ll take having my easy-access console space available and better concealment of the safe though, in exchange.

 

what is the camera connected too?

 

I modified my grille

 

Sound is much better. Especially since I put all Alpine speakers in doors and the Alpine amp/sub 300TND model under the passenger seat. Will put an Alpine head unit in in a few months probably because when I turn the truck off, the amp turns off a few seconds later with a small thump. Heard that's normal with Alpine and OEM head units.

They are the S series tweeters.

 

I love them. Very smooth ride.

 

Installed the Rough Country Hard tri fold tonneau cover and some other goodies to the bed rails.

 

Looks great! Also love the Pat's, Sox stickers.