Hattori

This is just to get you guys up to date as to where i am with this build. I'll try to keep everything chronicled as to when the upgrades are performed.

This is when I 1st got him:



This build has 4 different Stages which right now is too much for me to disclose. But here are my 2017 upgrade plans:

Fox 2.5x10 Triple Bypass with Reservoir shocks FRONT (Done)
Fox Bump stops (need to install em)
Total Chaos Spindle Gussets (done)
Total Chaos Stock Arm Bypass Mount ( Done)
Camburg Shackles (Done)
Deaver K37 (Done)

 

Missing pictures, homie!

 

And this is how it sits today:

 

Yes we'll need pictures of the interior and the exterior of the house too! Appears to be a beautiful home there! Nice

 

is there a way to add multiple pics per post? Im trying to upload the suspension pics fr you guys

 

Yeeaaaa, can't do that lol!! Then all my parts will magically disappear lol! My wife made me promise her a new house before I got my truck

 

you can upload as many as you want

 

Nice!!

Just click on "upload a file" "photos" and "post". Keep doing that until you get all pics in and below the comment box you'll see all your pictures you've uploaded with two buttons on the right "thumbnail" and "full image". (I prefer full image) click all of them then "post reply" (blue button where you click to post comment)

 

Looks like a dream home. Beautiful

 

Here's a shot of the Cam's, along with the Fox 2.5's

 

Had these guys laying around so I decided to spice up the interior LOL

 

nice setup

 

You need to post some pics within our Sky Silver thread!

 

You got it man!

 

Good looking 2nd gen! Was this photo taken at that 4WP show they had in Dallas earlier this year? I remember seeing your truck there.

 

That's me!! This was the 1st year that the truck made a appearance there! Got lots of buzz which I really liked!

 

So one of my good friends decided to go with a secondary setup on his 15 platinum and of course i obliged! Once we ordered the T/C stock length hoops we moved on the shocks, Kings. Here's the bad part; THEY SENT ME 2 PAIR!!!! Now im sitting on a set of smooth 2.5's with Resi's

fail.....but i still love King

 

Here's the finished look on his truck. Super nice and is smooth as butter...

 

damn !

 

Where does the secondary lower mounts bolt on to? Lca plate ?

 

there's a tab supplied in the hoop kit that you weld to the back side of the arm. About 3-4 inches from the lower ball joint, if my memory serves me right. Relatively easy to do if you don't mind trimming your wheel well and welding.

 

So this Friday I have the option to buy either of these setups and i can't decide on which way to go. My gut tells me to go ahead and do the 2.5 triple bypasses but I also have a KC Pro6 light bar here. Then there's the Deavers i need to tackle. But i'm sure ill figure it out

Here's the light that just MAGICALLY showed up on UPS with no owner..........

 

No need for the extreme amount of light if your suspension can't keep up with it.

 

HEY! WATCH YOU MOUTH!! LOL

 

Savage

OP: I like the look of those Pro6 lights... Something different from the rest of the crowd. I want to get one for my truck but I have no use for it here in the middle of the city.. there's already lights everywhere

 

He did me dirty huh! LOL! Nah, seriously I need to stay on pace with my 2nd phase of the suspension build which wont finish until summer of next year (2017)

The Pro6 like you said is quite a bit of light but I've grown a lot more bold in my country running escapades. Out in East Texas where I tear ass at; there are tons of roads that we blast through and its jet black out there with tons of hogs and wildlife. Honestly, I probably won't install it until fall season.

Stay tuned for the next upgrade......

 

sweet 2nd gen

 

Santa was late as hell, but he didn't let me down with help from SDHQ. I hope I can get it done while I'm off Thursday. I went with the KC Flex because i want a more slim look and not a possible too large for my liking round LED / HID light. Lemme tell you; if you haven't ordered anything from SDHQ; when you do pull the trigger; they do an AWESOME job prepping the box and getting the items ready to ship! That speaks quality to me. Not to mention these parts are 110% in quality. I'm sure ill be finding more to order very soon. Here's a look at what came. I had already bought the lights; just couldn't pass em up at work.