What have you done to your 2nd gen Tundra today?

No worries. Apparently the price went up but this is what I used... Just ripped it in half to make 240"L x 2" W.

If you get around to it, I have a "recipe" for one solution spray to help with the install that has worked great for the rest of my protective film installs

https://www.amazon.ca/VViViD-Clear-...x+120+Inch&qid=1568592666&s=automotive&sr=1-1

 

You should probably figure out how water got in the reservoir. Seems like a lot for condensation. That's what made your fluid icky

 

This stuff. I'm sure that what you put in will be fine, and if it isn't, we'll always think that it should've been.

 

Added LED strips to the topper and one under the hood

 

That’s what I’m scratching my head over too.

 

I finally got around to doing the rear fold down seats mod.

Anyone else find it convenient and practical?

 

For double cab?

 

Yes a DC

 

Need to do this. Did you grind / cut down hooks or bend hoops down?

 

I just used a rubber mallet to bend the hooks.

 

nice ! now that I have a topper, i found some projects which led strips did you use ? did you run a 12V wire from the battery to the rear ?

 

Also interested in the link. Those look they would replace the ugly AMP Research power step lights nicely. I was going to contact matt gecko for 1 long strip, but these look like they will work just fine, as long as the color is what I want.

 

Wanted to share a couple pictures of the LED lights at night. Should be really nice if I ever have to work under the hood at night. The bed also received a digital volt meter and a dual USB receptacle for devices while camping. Next is a new battery for the truck with a larger reserve capacity

 

I have a auxiliary fuse panel installed with a breaker and I ran 12G wiring from the panel all the way back, I'll take a picture of the bed wiring routing when I get a chance, hidden and clean.

I bought the LED strips here

PryEU Daylight White 6000K LED Strip Lights 12V
Waterproof for Auto Car Truck Boat Motorcycle Interior Lighting 12'' 30CM 3528 SMD UL Listed Pack of 4

PryEU Daylight White 6000K LED Strip Lights 12V for Interior Car Automotive Boats Motorcycle Lighting 12'' 30CM 2835 SMD UL Listed Pack of 4

https://www.amazon.com/dp/B00YXBEHQK/ref=cm_sw_r_cp_apa_i_PQ4FDb3A664DV

Keep in mind the wiring for the strips is very small, like 22. I stripped about an inch of each wire and twisted the wires and then folded it in half twice to make it large enough for a connector crimp.

 

Check the above posts as well as photos of at night.

Sorry for posting a lot in a row I couldn't figure out the multiuote feature on mobile

 

Shrek came into town this past Sunday and hooked it up. Definitely cleaned up the power band and improved shifting.

 

In progress

 

Dustin came and did mine last year in grand junction it been bad ass only thing is it wont shift in tow haul mode so i just dont put it in...

 

Just got this done:

 

After?

 

CARB special after the Feds latest decision ?

 

Whoa now, I'm not going crazy by getting a straight pipe here...

 

I don't have that problem. Have you tried pulling the neg battery terminal for a few to let it relearn? I didn't have to do that when I got tuned but maybe a try?

 

Are those 35s or bigger?

 

they look like 33"s

 

They are 33"s.
Falken Wildpeak 285/70R17


Front has Bilstein 5100's on the top setting, rear is stock, but I'm thinking about adding Toytec shackles on the lowest setting.

 

I'm running the same tires and yours look bigger. Lol

 

Are they on a 17in rim?