What have you done to your 1st gen Tundra today?

3rd gen. here, but very happy with my ADS!!!

 

I've had a viair 400p for a bit over a year. It's about $175 on Amazon and works pretty well.

I don't trust the gauge on it much, seems to be about 5psi off if I am watching it while running but I use my own gauge to do an "after" check anyway. I don't put it in the bag hot either, i let it cool down a bit before bagging it up.

 

I like that too...pretty much the only Toyota blues I don't care for are the Voodo Blue and Spectra Blue Mica....both are just too "bright" for me...

 

I've had a Viair 88p for the last 5 years. It fits perfectly in the storage compartment under the rear seat in my DC.

$90 VIAIR 88P - 00088 Tire Inflator Portable On/Offroad Air Compressor for Car, Truck, SUV & RV | 12V Heavy Duty Pump 120 PSI, Alligator Clip, Twist Chuck

https://www.amazon.com/Viair-00088-...coding=UTF8&psc=1&refRID=RM796HJYCT3VKFPX345T

Whatever you end up with skip the power outlet types and go for one that clips to the batter.

 

I love spectra blue! That truck is gorgeous. I'd be so obnoxious and throw some gold or bronze wheels on it haha

Nooooo! I like being different

I feel like the only way you can go wrong is to buy Icons but seriously, they are all great. I have kings on my 4runner and I like them. But everybody I know who has ADS just loves them.

 

Yup, only offered in 2004. I will never repaint this truck any other color

 

These things are beefy. I'm impressed. Oil changes should be a little easier now.

Oil pan still backordered.

 

Damn that was fast.

 

I'm still jealous that the new ones are two pieces. I have the old version and its one big heavy sonvabeesh to install. I had to pull it when I rebuilt my front end.

 

Well... the body shops moving quicker than we had thought it would be. Trucks going to be in for primer tomorrow by the looks of it. Need a different tailgate. He found some nasty rot inside the one I got with the bed.

Get some pics tomorrow when I go see them

 

How do? The hole Allows the oil to drain then Remove filter from up top I assume?

 

You can grab the filter from the side pretty easy. The other plate he is waiting on goes under the oil pan and has a nice hole for the plug.

Just get the gatornet and feel like it's the 80s again man! We don't need no stinkin tailgates!

 

Yes that would be tough. I'm glad they changed it. This thing is heavy enough. I honestly imagine I'll nedd a 2nd set of hands for the transmission skid as it involves drilling. Did you go all the way back to the TCase?

 

What color did you decide on?

 

Tcase I don't have no stinkin tcase!

Mine runs from the front bumper to just past the steering rack. I have a transmission plate from a different manufacturer but haven't installed it yet, the holes don't line up well so I have to find a solution for that.

 

Whoops! I forgot. Hurry up with that 4x4 conversion

 

Color code 1h5. Cement grey.

 

Today I replaced all 4 6.5" door speakers with Kenwood cheapo's from Crutchfield. The factory speakers still played despite all 4 having cooked the cone surrounds long ago.

Only managed to scratch up or break a couple of trim pieces. The speaker adapters and wire harnesses they included made for quick work. Sounds clearer now. Looking forward to replacing the cheap Kenwood single DIN with an Android Auto double DIN.

 

Came across an '06 in a blue... It MIGHT be the blue steel of your cap. Can't quite tell which blue.
It's on a Clist ad up near Utica, NY at a dealer. No association, just noticed the color.
https://utica.craigslist.org/ctd/d/utica-2006-toyota-tundra-v8/6950976400.html

 

I bought one of these. Works good and is pretty fast. I bought a quality 12 volt extension cable so I can reach all 4 tires from the battery.

$63 GSPSCN Silver Tire Inflator Heavy Duty Double Cylinders with Portable Bag- Car Accessories，Metal 12V Air Compressor Pump 150PSI with Adapter for Car, Truck, SUV Tires, Dinghy, Air Bed etc

https://www.amazon.com/GSPSCN-Infla...&s=gateway&sprefix=12+volt+air,aps,244&sr=8-6

 

Yes that is blue steel. It's lighter than my blue and more common, but still awesome in my opinion

 

Sorry, can’t resist:

 

Tacomas had another cool first gen only color than had 2 different names but the same color code 926.
Lavender steel metallic aka Cool steel metallic.

Silver and blue had a baby.

 

Body shop is making progress

 

That's progress? What have they done?

 

All the dents are gone. New door is all prepped to go on

 

You're gonna do a before and after when it's done, right?

 

Maybe?

 

• Oil change
• Installed Fumoto Valve. Good call Chris
• Greased driveshaft. Side note, I will find a way to grease the 4WD zerks if it's the last thing I do on this earth.
• Greased upper ball joints
• Got truck loaded up for camping trip this weekend.

While it is possible to replace the oil filter with the new Skid Row plate, it makes a huge mess. I took the spilled oil and rubbed the frame down.






So shiny!

 

@FirstGenVol I use either a pie pan on the frame or a plastic bag under the filter. Gotta be kinda quick to unspin and tip it up. On the other plate that you're waiting on I use a short funnel that holds in the hole, that way I get no oil on the plate.