Clear Corners

For months, I have searched everywhere to find these damned things for my 2003. The only ones I can find are for, I guess 04-06 DC and 1st gen Tacomas.
There are these: https://www.burtmanindustries.com/zoomprod.php?id=tun_corn_04_up&opt[9176]=8261236743 (the single/access cab) but I really don't trust that. These things apparently do not exist anymore anywhere, whether it's eBay or anything. The only ones I ever found were on OfferUp, but the guy didn't get back to me till I messaged again a month later when he was in the middle of selling them to someone.
They probably won't work at all, but 1st gen Tacomas' corner lights look very similar and look like they have almost the same mounting brackets.

If anyone has even a slight idea about where on God's green earth to find these things or even how to make them (if possible), I would greatly appreciate it.

 

This pair is a lot cheaper, but will only fit the 2000-2004 Tundra double cab.


https://www.ebay.com/i/312245917035?rt=nc&_trkparms=aid%3D222007&algo=SIM.MBE&ao=2&asc=20160908110712&meid=b83bf7afba554140baea0f611d11a318&pid=100677&rk=6&rkt=25&sd=303248943336&itm=312245917035&pmt=0&noa=1&pg=2385738

 

@02goes the ones I’m looking for are for single/extended cab

 

I have same interest to find a pair for my trk also. If I find a pair that's priced like the one's I found for the double cab I'll be sure to post it here.

 

Alright, cool. I’ll be sure to if I stumble across something as well. Thank you

 

I've been trying to find some as well. Can't you make the double cab ones fit?

Someone must make them for access cabs though.

 

Double cab won't work on access cab. You'll only find them on ebay these days, be sure to find them for an 03. There is a change in corners I believe in 05, the brackets are different. 04 should work.

https://www.ebay.com/p/DEPO-Chrome-...-96-97-98-Toyota-4runner-4-Runner/17015268198

 

Do you think the 4Runner ones would work for it? They look very similar, but of course the picture doesn’t show the brackets.

 

I have smoked head lights and corner lights on my 2000 access cab.THE TO LOOK AWESOME!!

 

Sorry those are the wrong ones. I think I can find them but you're right, hard to find now.

 

You’re good. These have been, aside from the Burtman’s link, the best I could get http://www.ajpdistributors.com/0001020304to3.html
But again, I’m concerned about the legitimacy. I took the chance and ordered them to no avail; no confirmation, no charge out of account, no response from contacting them.

If you do find any, though, be sure to link them. Thank you

 

I have a bad feeling those are the same lights I run but a black and white photo making the amber look clear.

 

I honestly wouldn’t doubt it

 

I have this same set. I love them. Light throw seems to be like OEM honestly. Been very pleased. Had them for over a year and no fogging up either!

 

I have the 55 watt hid bi-xenon headlight system also.SUPER BRIGHT!

 

I considered going with smoked at first but wasn't sure how it would look with it being red, but evidently it looks beautiful on the red trucks.
Then I saw a guy with a switchback setup with clear corners and form then on was hooked. It wouldn't look too good with the amber still on, though, so I've been holding off on that till I find some. Then I can fully complete my LED swap haha.

 

Detailed both my toys today

 

Wow, you make us guys with red trks proud. Darn, I just bought some clear headlight replacements by thinking the smoke lens wouldn't look good.

Looks like a new paint job, small lift, grill and new wheels for improvement. Care to mention what mfgr aftermarket parts you put on.

 

Stainless steel racing headers,true 2 1/2" dual exhaust no converters,self made cold air intake with k&n cone filter, recalibrated the computer,slotted front rotors,18,000 lumen front light bar ,55 watt hid bi- xenon hedlights 5000k,changed interior lights to white LED, changed dash lights, heater lights and lighted ignition.ring to red LEDs,new smoked headlights and corner lights,and new taillights,billet grill,1 1/2" billet wheel spacers,2" level kit , differential drop kit.

 

I forgot to mention that it has 382,000 miles and original paint!

 

How'd ya do that, I looked everywhere for doing that and found nothing.

 

It was pretty popular in the early 2000's.I found it on line somewhere.

 

1 1/2" billet wheel spacers. What rims did you put on?

 

Gear 16x8 with Cooper discover AT3's

 

I got mine from above and quality is very nice & really makes the truck look 2010+. Its funny how such a small modification can make such a big difference on these trucks! pic from link is same color as my truck so stole the pic

 

The Clear Corner look, makes a big difference I say. I have been looking myself for a while. but you just won't find them anymore for the AC. I have an 05, and I just order all LED for the whole Truck, I got new Yellow/Amber Fog light Kit, doing a SwitchBack Turn Signal setup, etc. that yellow corner reflector is annoying as all get out lol... I ordered a new set of Corner Lamps, Im thinking of trying to replace the reflector and get a white one, to make them clear.

has anyone done this before? or someone has with instructions? I heard that taking the clear corners apart are tough. but we shall see!