1. Welcome to Tundras.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tundra discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Tundra owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site
    Quick Links: Double checking on Fumoto oil valve fitment. Tie downs in rear seat of truck Repairable? Anyone Else Have Grille Surround Screw Bracket Break When Removing Grille Insert? How screwed am I? Front hitch mount for dirt bike. What Color Should I Wrap My Front Bumper Caps and Grill Surround/Bulge?

Rci skid, sliders

Discussion in '2.5 Gen Tundras (2014-2021)' started by Steamin, Aug 22, 2019.

Page 1 of 2
  1. Aug 22, 2019 at 3:21 PM
    #1
    Steamin

    #1
    Steamin [OP] New Member

    Joined:
    May 4, 2019
    Member:
    #30077
    Messages:
    30
    Gender:
    Male
    Colorado
    Vehicle:
    2017 silver tundra crewmax 5.7 Trd trim
    Bought new June 2017. Mods done May-June 2019 (I got busy, and boy am I happy): *Elka 2.5 coil overs front, elka 2.5 rear both with reservoir cylinders: https:/us.elkasuspension.com/product/2-5-reservoir-front-rear-shocks-kit-for-toyota-tundra-2007-to-2017-2-in-to-3-in-lift/ (set to Elka factory settings, with built-in compensation for lean, 2.5" of suspension lift in front). (Bought from Toytec, installed locally) *Total chaos UCA: (bought Toytec, installed locally) *New rear leaf spring pack: don't have link (provides about 2" of lift and stiffens things up a little bit) *35x12.50 Falken on 20" MR 309 Grid "race" wheels (Really, really regret that I didn't get 18" or even 17" wheels. Like the look and road performance, wish I had more rubber to play with on the trail, poor choice). *Stealth light bar in grill valance: https://www.roughcountry.com/toyota-30in-led-bumper-kit70655c.htmlgclid=CjwKCAjwuqfoBRAEEiwAZErCshDWqD9kgBWOkMW3JR7J4Q0STQuMzrP2CZ5pWdlsICepeiPyVB4M-xoCWEwQAvD_BwE (this thing is bright, and almost drowns out my high-beams even at distance. It cost about $250... I have no idea why anyone would spend over 1K on a rigid bar) *LED projector headlight bulb replacement: (gotta find the link) *Headlight Revolution LED fog light replacement: https://headlightrevolution.com/2014-2017-toyota-tundra-led-fog-light-bulb-upgrade-gtr-lighting-ultra-series/ (similar to post above about the bar... these are expensive, but about 1/3 of rigid, and plenty bright for both on and off-road use) *Dark window tint (matches the rear and back window, so quite dark). *stubby antenna (Don't do this if you live in a rural area without XM, it looks cool, but like much of it's ilk, it isn't functional and you lose signal easy. My long antenna whistles above 80 mph though and I have satellite radio). from Ebay June 2017-July 2019 *Chrome delete (this wasn't easy or particularly cheap, and I started 2 years ago, just did the bumper ends ). Done: grill surround, pro-grill insert, badge overlays-matte black, Front bumper ends, 1d6 color matched bumpershellz (messed up the install, made it waaay harder than it is, found the directions once they were on and one was cracked), rear bumper came color matched. Most were used parts found locally or on ebay. Next up: In the next two weeks: -RCI Skid plates -RCI Rock Sliders both to be installed by Toytec in Denver Later (whenever I can pull it off without my wife killing me): *Front winch bumper *Rear arb air lockers *Exhaust upgrade: Bam 8" or OEM PRO *Rear bumper replace Seems there's always one more thing to do...
    Steamin, Aug 22, 2019
    #1
    MatthewPTguy, 15whtrd, vanthesupreme and 13 others like this.
  2. Aug 22, 2019 at 3:35 PM
    #2
    TylerDurden311

    #2
    TylerDurden311 Paper Street

    Joined:
    Jan 5, 2019
    Member:
    #23997
    Messages:
    307
    Gender:
    Male
    Vehicle:
    2018 Tundra CM
    Look nice!
     
    TylerDurden311, Aug 22, 2019
    #2
    Steamin[OP] likes this.
  3. Aug 22, 2019 at 4:05 PM
    #3
    TXTundra2722

    #3
    TXTundra2722 Pipe Hitters Union

    Joined:
    Nov 26, 2018
    Member:
    #22236
    Messages:
    1,763
    Gender:
    Male
    Texas
    Vehicle:
    2015 Black Tundra
    Nice
     
    TXTundra2722, Aug 22, 2019
    #3
    Steamin[OP] likes this.
  4. Aug 22, 2019 at 5:30 PM
    #4
    Kerch71

    #4
    Kerch71 Surgical Precision

    Joined:
    Apr 5, 2018
    Member:
    #14195
    Messages:
    1,709
    Gender:
    Male
    First Name:
    Matt
    Mechanicsville VA
    Vehicle:
    2015 CM SC TRD Pro/ICON/Total Chaos Build
    CM TRD Pro glass panels, Icon 2.5, TC long travel UCA/LCA, Toyota supercharger, Airlift rear suspension, Warn winch, custom front and rear bumper, Coachbuilder roof rack, lengthened chassis 12", 37" Nitto Grapplers, custom graphics, Magnaflow Flowmaster 4" SS Exhaust
    Those look righteous!
     
    Kerch71, Aug 22, 2019
    #4
    Steamin[OP] likes this.
  5. Aug 22, 2019 at 5:35 PM
    #5
    bigzrs01

    #5
    bigzrs01 New Member

    Joined:
    Apr 9, 2018
    Member:
    #14323
    Messages:
    375
    Gender:
    Male
    First Name:
    Zack
    Charlotte, NC
    Vehicle:
    2018 Cement CM
    Nice!

    Can you get a full side profile shot of the sliders tomorrow??
     
    bigzrs01, Aug 22, 2019
    #5
    Steamin[QUOTED][OP] likes this.
  6. Aug 22, 2019 at 6:20 PM
    #6
    BrownieT

    #6
    BrownieT New Member

    Joined:
    Mar 20, 2019
    Member:
    #27875
    Messages:
    124
    Gender:
    Male
    Vehicle:
    2018 Tundra TRD 4x4
    Nice. ... those steel or aluminum ?
     
    BrownieT, Aug 22, 2019
    #6
    Steamin[OP] likes this.
  7. Aug 22, 2019 at 6:27 PM
    #7
    Black Wolf

    #7
    Black Wolf Chillin' in Alamosa

    Joined:
    Apr 20, 2014
    Member:
    #378
    Messages:
    42,940
    Gender:
    Male
    First Name:
    Matt
    Alamosa, CO
    Vehicle:
    2022 Nissan Frontier SV 4X4
    TuwaPro rack, Z1 Offroad stuff, NISMO suspension stuff, FlowmasterFX Extreme exhaust, AIS, OVS, J&L can, other goodies on the way
    Looking nice!
     
    Black Wolf, Aug 22, 2019
    #7
  8. Aug 23, 2019 at 6:25 AM
    #8
    Steamin

    #8
    Steamin [OP] New Member

    Joined:
    May 4, 2019
    Member:
    #30077
    Messages:
    30
    Gender:
    Male
    Colorado
    Vehicle:
    2017 silver tundra crewmax 5.7 Trd trim
    Bought new June 2017. Mods done May-June 2019 (I got busy, and boy am I happy): *Elka 2.5 coil overs front, elka 2.5 rear both with reservoir cylinders: https:/us.elkasuspension.com/product/2-5-reservoir-front-rear-shocks-kit-for-toyota-tundra-2007-to-2017-2-in-to-3-in-lift/ (set to Elka factory settings, with built-in compensation for lean, 2.5" of suspension lift in front). (Bought from Toytec, installed locally) *Total chaos UCA: (bought Toytec, installed locally) *New rear leaf spring pack: don't have link (provides about 2" of lift and stiffens things up a little bit) *35x12.50 Falken on 20" MR 309 Grid "race" wheels (Really, really regret that I didn't get 18" or even 17" wheels. Like the look and road performance, wish I had more rubber to play with on the trail, poor choice). *Stealth light bar in grill valance: https://www.roughcountry.com/toyota-30in-led-bumper-kit70655c.htmlgclid=CjwKCAjwuqfoBRAEEiwAZErCshDWqD9kgBWOkMW3JR7J4Q0STQuMzrP2CZ5pWdlsICepeiPyVB4M-xoCWEwQAvD_BwE (this thing is bright, and almost drowns out my high-beams even at distance. It cost about $250... I have no idea why anyone would spend over 1K on a rigid bar) *LED projector headlight bulb replacement: (gotta find the link) *Headlight Revolution LED fog light replacement: https://headlightrevolution.com/2014-2017-toyota-tundra-led-fog-light-bulb-upgrade-gtr-lighting-ultra-series/ (similar to post above about the bar... these are expensive, but about 1/3 of rigid, and plenty bright for both on and off-road use) *Dark window tint (matches the rear and back window, so quite dark). *stubby antenna (Don't do this if you live in a rural area without XM, it looks cool, but like much of it's ilk, it isn't functional and you lose signal easy. My long antenna whistles above 80 mph though and I have satellite radio). from Ebay June 2017-July 2019 *Chrome delete (this wasn't easy or particularly cheap, and I started 2 years ago, just did the bumper ends ). Done: grill surround, pro-grill insert, badge overlays-matte black, Front bumper ends, 1d6 color matched bumpershellz (messed up the install, made it waaay harder than it is, found the directions once they were on and one was cracked), rear bumper came color matched. Most were used parts found locally or on ebay. Next up: In the next two weeks: -RCI Skid plates -RCI Rock Sliders both to be installed by Toytec in Denver Later (whenever I can pull it off without my wife killing me): *Front winch bumper *Rear arb air lockers *Exhaust upgrade: Bam 8" or OEM PRO *Rear bumper replace Seems there's always one more thing to do...
    20190823_072308.jpg 20190823_072246.jpg
     
    Steamin, Aug 23, 2019
    #8
    bigzrs01[QUOTED], Rolling Biome, zcarpenter92 and 2 others like this.
  9. Aug 23, 2019 at 6:26 AM
    #9
    Steamin

    #9
    Steamin [OP] New Member

    Joined:
    May 4, 2019
    Member:
    #30077
    Messages:
    30
    Gender:
    Male
    Colorado
    Vehicle:
    2017 silver tundra crewmax 5.7 Trd trim
    Bought new June 2017. Mods done May-June 2019 (I got busy, and boy am I happy): *Elka 2.5 coil overs front, elka 2.5 rear both with reservoir cylinders: https:/us.elkasuspension.com/product/2-5-reservoir-front-rear-shocks-kit-for-toyota-tundra-2007-to-2017-2-in-to-3-in-lift/ (set to Elka factory settings, with built-in compensation for lean, 2.5" of suspension lift in front). (Bought from Toytec, installed locally) *Total chaos UCA: (bought Toytec, installed locally) *New rear leaf spring pack: don't have link (provides about 2" of lift and stiffens things up a little bit) *35x12.50 Falken on 20" MR 309 Grid "race" wheels (Really, really regret that I didn't get 18" or even 17" wheels. Like the look and road performance, wish I had more rubber to play with on the trail, poor choice). *Stealth light bar in grill valance: https://www.roughcountry.com/toyota-30in-led-bumper-kit70655c.htmlgclid=CjwKCAjwuqfoBRAEEiwAZErCshDWqD9kgBWOkMW3JR7J4Q0STQuMzrP2CZ5pWdlsICepeiPyVB4M-xoCWEwQAvD_BwE (this thing is bright, and almost drowns out my high-beams even at distance. It cost about $250... I have no idea why anyone would spend over 1K on a rigid bar) *LED projector headlight bulb replacement: (gotta find the link) *Headlight Revolution LED fog light replacement: https://headlightrevolution.com/2014-2017-toyota-tundra-led-fog-light-bulb-upgrade-gtr-lighting-ultra-series/ (similar to post above about the bar... these are expensive, but about 1/3 of rigid, and plenty bright for both on and off-road use) *Dark window tint (matches the rear and back window, so quite dark). *stubby antenna (Don't do this if you live in a rural area without XM, it looks cool, but like much of it's ilk, it isn't functional and you lose signal easy. My long antenna whistles above 80 mph though and I have satellite radio). from Ebay June 2017-July 2019 *Chrome delete (this wasn't easy or particularly cheap, and I started 2 years ago, just did the bumper ends ). Done: grill surround, pro-grill insert, badge overlays-matte black, Front bumper ends, 1d6 color matched bumpershellz (messed up the install, made it waaay harder than it is, found the directions once they were on and one was cracked), rear bumper came color matched. Most were used parts found locally or on ebay. Next up: In the next two weeks: -RCI Skid plates -RCI Rock Sliders both to be installed by Toytec in Denver Later (whenever I can pull it off without my wife killing me): *Front winch bumper *Rear arb air lockers *Exhaust upgrade: Bam 8" or OEM PRO *Rear bumper replace Seems there's always one more thing to do...
    Steel
     
    Steamin, Aug 23, 2019
    #9
  10. Aug 23, 2019 at 6:36 AM
    #10
    MotoTundra

    #10
    MotoTundra The Ocho

    Joined:
    Jan 6, 2014
    Member:
    #8
    Messages:
    7,677
    Gender:
    Male
    First Name:
    Don
    -TRS Mini D2S Retrofit on TRD Pro Headlights (Apollo 2.0 Shrouds, 35w XB Ballasts, 5500k Bulbs) -Baja Designs Squadron R Sport Aux lights. -TRD Pro Grill -TRD Rear Sway Bar -BakFlip VP Tonneau w/BakBox -Dipped wheels & bumpers -Iron Cross HD steps -Undercover Swingcase -SunTek Paint Protection film -Tinted glass -Bedmat -OEM Towing Mirrors
    :thumbsup::thumbsup:
     
    MotoTundra, Aug 23, 2019
    #10
  11. Aug 23, 2019 at 6:58 AM
    #11
    BackHandHighballer

    #11
    BackHandHighballer New Member

    Joined:
    Aug 23, 2019
    Member:
    #35026
    Messages:
    29
    Vehicle:
    2017 White Tundra Crewmax 1794
    Wow I want those sliders NOW
     
    BackHandHighballer, Aug 23, 2019
    #11
  12. Aug 23, 2019 at 7:48 AM
    #12
    TXMiamiFan

    #12
    TXMiamiFan SSEM #3 and tractor extraordinaire

    Joined:
    Nov 26, 2015
    Member:
    #2160
    Messages:
    25,274
    Gender:
    Male
    First Name:
    Jose
    Houston, TX
    Vehicle:
    2016 White Crew Max TRD
    TRD Pro Grille, ESP Storage, Tailgate Inserts, Line-X Bedliner, Weathertech Floorliners, Wet Okole Seat Covers, 5" Shorty Antenna, Mickey Thompson MM-366 Wheels, ToyTec Boss, 35" BFG KO2 to name a few.
    There's some dude in NV (or CA) selling a pair.
     
    TXMiamiFan, Aug 23, 2019
    #12
  13. Aug 23, 2019 at 7:49 AM
    #13
    sbxx312

    #13
    sbxx312 New Member

    Joined:
    Apr 24, 2018
    Member:
    #14715
    Messages:
    1,168
    Gender:
    Male
    Colorado
    Vehicle:
    2018 Tundra, 2012 s/c Tacoma
    Road trip to Loveland and you can pick up a pair yourself. Or go to Toytec. I spoke to them a few weeks ago about RCI and Victory sliders and they were great. They were also the only ones that didn't try to gouge for install. One hour. That's fair to me.

    Slee sliders + install and you felt like someone stole your wallet. Really nice though.
     
    sbxx312, Aug 23, 2019
    #13
  14. Aug 23, 2019 at 7:52 AM
    #14
    sbxx312

    #14
    sbxx312 New Member

    Joined:
    Apr 24, 2018
    Member:
    #14715
    Messages:
    1,168
    Gender:
    Male
    Colorado
    Vehicle:
    2018 Tundra, 2012 s/c Tacoma
    sbxx312, Aug 23, 2019
    #14
    TXMiamiFan[QUOTED] likes this.
  15. Aug 23, 2019 at 7:54 AM
    #15
    Steamin

    #15
    Steamin [OP] New Member

    Joined:
    May 4, 2019
    Member:
    #30077
    Messages:
    30
    Gender:
    Male
    Colorado
    Vehicle:
    2017 silver tundra crewmax 5.7 Trd trim
    Bought new June 2017. Mods done May-June 2019 (I got busy, and boy am I happy): *Elka 2.5 coil overs front, elka 2.5 rear both with reservoir cylinders: https:/us.elkasuspension.com/product/2-5-reservoir-front-rear-shocks-kit-for-toyota-tundra-2007-to-2017-2-in-to-3-in-lift/ (set to Elka factory settings, with built-in compensation for lean, 2.5" of suspension lift in front). (Bought from Toytec, installed locally) *Total chaos UCA: (bought Toytec, installed locally) *New rear leaf spring pack: don't have link (provides about 2" of lift and stiffens things up a little bit) *35x12.50 Falken on 20" MR 309 Grid "race" wheels (Really, really regret that I didn't get 18" or even 17" wheels. Like the look and road performance, wish I had more rubber to play with on the trail, poor choice). *Stealth light bar in grill valance: https://www.roughcountry.com/toyota-30in-led-bumper-kit70655c.htmlgclid=CjwKCAjwuqfoBRAEEiwAZErCshDWqD9kgBWOkMW3JR7J4Q0STQuMzrP2CZ5pWdlsICepeiPyVB4M-xoCWEwQAvD_BwE (this thing is bright, and almost drowns out my high-beams even at distance. It cost about $250... I have no idea why anyone would spend over 1K on a rigid bar) *LED projector headlight bulb replacement: (gotta find the link) *Headlight Revolution LED fog light replacement: https://headlightrevolution.com/2014-2017-toyota-tundra-led-fog-light-bulb-upgrade-gtr-lighting-ultra-series/ (similar to post above about the bar... these are expensive, but about 1/3 of rigid, and plenty bright for both on and off-road use) *Dark window tint (matches the rear and back window, so quite dark). *stubby antenna (Don't do this if you live in a rural area without XM, it looks cool, but like much of it's ilk, it isn't functional and you lose signal easy. My long antenna whistles above 80 mph though and I have satellite radio). from Ebay June 2017-July 2019 *Chrome delete (this wasn't easy or particularly cheap, and I started 2 years ago, just did the bumper ends ). Done: grill surround, pro-grill insert, badge overlays-matte black, Front bumper ends, 1d6 color matched bumpershellz (messed up the install, made it waaay harder than it is, found the directions once they were on and one was cracked), rear bumper came color matched. Most were used parts found locally or on ebay. Next up: In the next two weeks: -RCI Skid plates -RCI Rock Sliders both to be installed by Toytec in Denver Later (whenever I can pull it off without my wife killing me): *Front winch bumper *Rear arb air lockers *Exhaust upgrade: Bam 8" or OEM PRO *Rear bumper replace Seems there's always one more thing to do...
    Not a super long wait to get them new, but count on 4-6 weeks to manufacture. Seems quicker than some of the others... Worth noting that some claim it's necessary to drill holes in your frame to get good sliders that are truly weight bearing. RCI and Toytec say not so, and did not drill any holes when installing these. I noticed that the distance to from the last mount point to the rear tire is pretty big. It looks to me like the slider will flex if you're balancing the weight of the truck back there. I'll probably find out before too long!
     
    Steamin, Aug 23, 2019
    #15
    zcarpenter92 likes this.
  16. Aug 23, 2019 at 7:57 AM
    #16
    Steamin

    #16
    Steamin [OP] New Member

    Joined:
    May 4, 2019
    Member:
    #30077
    Messages:
    30
    Gender:
    Male
    Colorado
    Vehicle:
    2017 silver tundra crewmax 5.7 Trd trim
    Bought new June 2017. Mods done May-June 2019 (I got busy, and boy am I happy): *Elka 2.5 coil overs front, elka 2.5 rear both with reservoir cylinders: https:/us.elkasuspension.com/product/2-5-reservoir-front-rear-shocks-kit-for-toyota-tundra-2007-to-2017-2-in-to-3-in-lift/ (set to Elka factory settings, with built-in compensation for lean, 2.5" of suspension lift in front). (Bought from Toytec, installed locally) *Total chaos UCA: (bought Toytec, installed locally) *New rear leaf spring pack: don't have link (provides about 2" of lift and stiffens things up a little bit) *35x12.50 Falken on 20" MR 309 Grid "race" wheels (Really, really regret that I didn't get 18" or even 17" wheels. Like the look and road performance, wish I had more rubber to play with on the trail, poor choice). *Stealth light bar in grill valance: https://www.roughcountry.com/toyota-30in-led-bumper-kit70655c.htmlgclid=CjwKCAjwuqfoBRAEEiwAZErCshDWqD9kgBWOkMW3JR7J4Q0STQuMzrP2CZ5pWdlsICepeiPyVB4M-xoCWEwQAvD_BwE (this thing is bright, and almost drowns out my high-beams even at distance. It cost about $250... I have no idea why anyone would spend over 1K on a rigid bar) *LED projector headlight bulb replacement: (gotta find the link) *Headlight Revolution LED fog light replacement: https://headlightrevolution.com/2014-2017-toyota-tundra-led-fog-light-bulb-upgrade-gtr-lighting-ultra-series/ (similar to post above about the bar... these are expensive, but about 1/3 of rigid, and plenty bright for both on and off-road use) *Dark window tint (matches the rear and back window, so quite dark). *stubby antenna (Don't do this if you live in a rural area without XM, it looks cool, but like much of it's ilk, it isn't functional and you lose signal easy. My long antenna whistles above 80 mph though and I have satellite radio). from Ebay June 2017-July 2019 *Chrome delete (this wasn't easy or particularly cheap, and I started 2 years ago, just did the bumper ends ). Done: grill surround, pro-grill insert, badge overlays-matte black, Front bumper ends, 1d6 color matched bumpershellz (messed up the install, made it waaay harder than it is, found the directions once they were on and one was cracked), rear bumper came color matched. Most were used parts found locally or on ebay. Next up: In the next two weeks: -RCI Skid plates -RCI Rock Sliders both to be installed by Toytec in Denver Later (whenever I can pull it off without my wife killing me): *Front winch bumper *Rear arb air lockers *Exhaust upgrade: Bam 8" or OEM PRO *Rear bumper replace Seems there's always one more thing to do...

    Toytec installed these for about $100.

    They did some other work for me that others had said couldn't be done (my 35" tire is mounted up under my bed now. Like, awesome to have my bed and a spare!), so it was a bit more total but extremely fair. Call, ask for Anthony.
     
    Steamin, Aug 23, 2019
    #16
    TXMiamiFan likes this.
  17. Aug 23, 2019 at 8:00 AM
    #17
    sbxx312

    #17
    sbxx312 New Member

    Joined:
    Apr 24, 2018
    Member:
    #14715
    Messages:
    1,168
    Gender:
    Male
    Colorado
    Vehicle:
    2018 Tundra, 2012 s/c Tacoma
    Nice. I spoke to Anthony. He was great. I have a list of stuff I want them to do now. It's a problem. But Christmas is coming.
     
    sbxx312, Aug 23, 2019
    #17
  18. Aug 23, 2019 at 8:01 AM
    #18
    Steamin

    #18
    Steamin [OP] New Member

    Joined:
    May 4, 2019
    Member:
    #30077
    Messages:
    30
    Gender:
    Male
    Colorado
    Vehicle:
    2017 silver tundra crewmax 5.7 Trd trim
    Bought new June 2017. Mods done May-June 2019 (I got busy, and boy am I happy): *Elka 2.5 coil overs front, elka 2.5 rear both with reservoir cylinders: https:/us.elkasuspension.com/product/2-5-reservoir-front-rear-shocks-kit-for-toyota-tundra-2007-to-2017-2-in-to-3-in-lift/ (set to Elka factory settings, with built-in compensation for lean, 2.5" of suspension lift in front). (Bought from Toytec, installed locally) *Total chaos UCA: (bought Toytec, installed locally) *New rear leaf spring pack: don't have link (provides about 2" of lift and stiffens things up a little bit) *35x12.50 Falken on 20" MR 309 Grid "race" wheels (Really, really regret that I didn't get 18" or even 17" wheels. Like the look and road performance, wish I had more rubber to play with on the trail, poor choice). *Stealth light bar in grill valance: https://www.roughcountry.com/toyota-30in-led-bumper-kit70655c.htmlgclid=CjwKCAjwuqfoBRAEEiwAZErCshDWqD9kgBWOkMW3JR7J4Q0STQuMzrP2CZ5pWdlsICepeiPyVB4M-xoCWEwQAvD_BwE (this thing is bright, and almost drowns out my high-beams even at distance. It cost about $250... I have no idea why anyone would spend over 1K on a rigid bar) *LED projector headlight bulb replacement: (gotta find the link) *Headlight Revolution LED fog light replacement: https://headlightrevolution.com/2014-2017-toyota-tundra-led-fog-light-bulb-upgrade-gtr-lighting-ultra-series/ (similar to post above about the bar... these are expensive, but about 1/3 of rigid, and plenty bright for both on and off-road use) *Dark window tint (matches the rear and back window, so quite dark). *stubby antenna (Don't do this if you live in a rural area without XM, it looks cool, but like much of it's ilk, it isn't functional and you lose signal easy. My long antenna whistles above 80 mph though and I have satellite radio). from Ebay June 2017-July 2019 *Chrome delete (this wasn't easy or particularly cheap, and I started 2 years ago, just did the bumper ends ). Done: grill surround, pro-grill insert, badge overlays-matte black, Front bumper ends, 1d6 color matched bumpershellz (messed up the install, made it waaay harder than it is, found the directions once they were on and one was cracked), rear bumper came color matched. Most were used parts found locally or on ebay. Next up: In the next two weeks: -RCI Skid plates -RCI Rock Sliders both to be installed by Toytec in Denver Later (whenever I can pull it off without my wife killing me): *Front winch bumper *Rear arb air lockers *Exhaust upgrade: Bam 8" or OEM PRO *Rear bumper replace Seems there's always one more thing to do...
    And if you ask, I think they're selling a lightly used Magnuson supercharger for around $4K. It might be gone, and I might have my numbers wrong by a bit, but it was a good deal. It took a lot of willpower not to buy that thing a month ago. I'll let them answer any questions about details or whether or not that's even true anymore.
     
    Steamin, Aug 23, 2019
    #18
  19. Aug 23, 2019 at 8:02 AM
    #19
    TXMiamiFan

    #19
    TXMiamiFan SSEM #3 and tractor extraordinaire

    Joined:
    Nov 26, 2015
    Member:
    #2160
    Messages:
    25,274
    Gender:
    Male
    First Name:
    Jose
    Houston, TX
    Vehicle:
    2016 White Crew Max TRD
    TRD Pro Grille, ESP Storage, Tailgate Inserts, Line-X Bedliner, Weathertech Floorliners, Wet Okole Seat Covers, 5" Shorty Antenna, Mickey Thompson MM-366 Wheels, ToyTec Boss, 35" BFG KO2 to name a few.
    I'm just glad they don't have a location south of Denver :rofl:
     
    TXMiamiFan, Aug 23, 2019
    #19
  20. Aug 23, 2019 at 8:11 AM
    #20
    sbxx312

    #20
    sbxx312 New Member

    Joined:
    Apr 24, 2018
    Member:
    #14715
    Messages:
    1,168
    Gender:
    Male
    Colorado
    Vehicle:
    2018 Tundra, 2012 s/c Tacoma
    I was on the Magnuson site yesterday. That would be so nice. 2018 kit is out.
     
    sbxx312, Aug 23, 2019
    #20
    Steamin[OP] likes this.
  21. Aug 23, 2019 at 8:17 AM
    #21
    Steamin

    #21
    Steamin [OP] New Member

    Joined:
    May 4, 2019
    Member:
    #30077
    Messages:
    30
    Gender:
    Male
    Colorado
    Vehicle:
    2017 silver tundra crewmax 5.7 Trd trim
    Bought new June 2017. Mods done May-June 2019 (I got busy, and boy am I happy): *Elka 2.5 coil overs front, elka 2.5 rear both with reservoir cylinders: https:/us.elkasuspension.com/product/2-5-reservoir-front-rear-shocks-kit-for-toyota-tundra-2007-to-2017-2-in-to-3-in-lift/ (set to Elka factory settings, with built-in compensation for lean, 2.5" of suspension lift in front). (Bought from Toytec, installed locally) *Total chaos UCA: (bought Toytec, installed locally) *New rear leaf spring pack: don't have link (provides about 2" of lift and stiffens things up a little bit) *35x12.50 Falken on 20" MR 309 Grid "race" wheels (Really, really regret that I didn't get 18" or even 17" wheels. Like the look and road performance, wish I had more rubber to play with on the trail, poor choice). *Stealth light bar in grill valance: https://www.roughcountry.com/toyota-30in-led-bumper-kit70655c.htmlgclid=CjwKCAjwuqfoBRAEEiwAZErCshDWqD9kgBWOkMW3JR7J4Q0STQuMzrP2CZ5pWdlsICepeiPyVB4M-xoCWEwQAvD_BwE (this thing is bright, and almost drowns out my high-beams even at distance. It cost about $250... I have no idea why anyone would spend over 1K on a rigid bar) *LED projector headlight bulb replacement: (gotta find the link) *Headlight Revolution LED fog light replacement: https://headlightrevolution.com/2014-2017-toyota-tundra-led-fog-light-bulb-upgrade-gtr-lighting-ultra-series/ (similar to post above about the bar... these are expensive, but about 1/3 of rigid, and plenty bright for both on and off-road use) *Dark window tint (matches the rear and back window, so quite dark). *stubby antenna (Don't do this if you live in a rural area without XM, it looks cool, but like much of it's ilk, it isn't functional and you lose signal easy. My long antenna whistles above 80 mph though and I have satellite radio). from Ebay June 2017-July 2019 *Chrome delete (this wasn't easy or particularly cheap, and I started 2 years ago, just did the bumper ends ). Done: grill surround, pro-grill insert, badge overlays-matte black, Front bumper ends, 1d6 color matched bumpershellz (messed up the install, made it waaay harder than it is, found the directions once they were on and one was cracked), rear bumper came color matched. Most were used parts found locally or on ebay. Next up: In the next two weeks: -RCI Skid plates -RCI Rock Sliders both to be installed by Toytec in Denver Later (whenever I can pull it off without my wife killing me): *Front winch bumper *Rear arb air lockers *Exhaust upgrade: Bam 8" or OEM PRO *Rear bumper replace Seems there's always one more thing to do...
    330 miles yesterday before 2 PM for me... They're good enough that I'm not even safe way up in the mountains in NW CO.
     
    Steamin, Aug 23, 2019
    #21
    TXMiamiFan[QUOTED] likes this.
  22. Aug 23, 2019 at 8:18 AM
    #22
    sbxx312

    #22
    sbxx312 New Member

    Joined:
    Apr 24, 2018
    Member:
    #14715
    Messages:
    1,168
    Gender:
    Male
    Colorado
    Vehicle:
    2018 Tundra, 2012 s/c Tacoma
    I had the TRD supercharger in my Tacoma serviced on Tuesday as part of the truck's 60k service. S/C Taco v. beast mode Tundra would be a fun race. The Tundra is fast without a supercharger. I want one though.
     
    sbxx312, Aug 23, 2019
    #22
  23. Aug 23, 2019 at 11:12 AM
    #23
    bigzrs01

    #23
    bigzrs01 New Member

    Joined:
    Apr 9, 2018
    Member:
    #14323
    Messages:
    375
    Gender:
    Male
    First Name:
    Zack
    Charlotte, NC
    Vehicle:
    2018 Cement CM
    Damn, these look really good. Shit.
     
    bigzrs01, Aug 23, 2019
    #23
    BackHandHighballer likes this.
  24. Aug 23, 2019 at 11:46 AM
    #24
    Steamin

    #24
    Steamin [OP] New Member

    Joined:
    May 4, 2019
    Member:
    #30077
    Messages:
    30
    Gender:
    Male
    Colorado
    Vehicle:
    2017 silver tundra crewmax 5.7 Trd trim
    Bought new June 2017. Mods done May-June 2019 (I got busy, and boy am I happy): *Elka 2.5 coil overs front, elka 2.5 rear both with reservoir cylinders: https:/us.elkasuspension.com/product/2-5-reservoir-front-rear-shocks-kit-for-toyota-tundra-2007-to-2017-2-in-to-3-in-lift/ (set to Elka factory settings, with built-in compensation for lean, 2.5" of suspension lift in front). (Bought from Toytec, installed locally) *Total chaos UCA: (bought Toytec, installed locally) *New rear leaf spring pack: don't have link (provides about 2" of lift and stiffens things up a little bit) *35x12.50 Falken on 20" MR 309 Grid "race" wheels (Really, really regret that I didn't get 18" or even 17" wheels. Like the look and road performance, wish I had more rubber to play with on the trail, poor choice). *Stealth light bar in grill valance: https://www.roughcountry.com/toyota-30in-led-bumper-kit70655c.htmlgclid=CjwKCAjwuqfoBRAEEiwAZErCshDWqD9kgBWOkMW3JR7J4Q0STQuMzrP2CZ5pWdlsICepeiPyVB4M-xoCWEwQAvD_BwE (this thing is bright, and almost drowns out my high-beams even at distance. It cost about $250... I have no idea why anyone would spend over 1K on a rigid bar) *LED projector headlight bulb replacement: (gotta find the link) *Headlight Revolution LED fog light replacement: https://headlightrevolution.com/2014-2017-toyota-tundra-led-fog-light-bulb-upgrade-gtr-lighting-ultra-series/ (similar to post above about the bar... these are expensive, but about 1/3 of rigid, and plenty bright for both on and off-road use) *Dark window tint (matches the rear and back window, so quite dark). *stubby antenna (Don't do this if you live in a rural area without XM, it looks cool, but like much of it's ilk, it isn't functional and you lose signal easy. My long antenna whistles above 80 mph though and I have satellite radio). from Ebay June 2017-July 2019 *Chrome delete (this wasn't easy or particularly cheap, and I started 2 years ago, just did the bumper ends ). Done: grill surround, pro-grill insert, badge overlays-matte black, Front bumper ends, 1d6 color matched bumpershellz (messed up the install, made it waaay harder than it is, found the directions once they were on and one was cracked), rear bumper came color matched. Most were used parts found locally or on ebay. Next up: In the next two weeks: -RCI Skid plates -RCI Rock Sliders both to be installed by Toytec in Denver Later (whenever I can pull it off without my wife killing me): *Front winch bumper *Rear arb air lockers *Exhaust upgrade: Bam 8" or OEM PRO *Rear bumper replace Seems there's always one more thing to do...
    haha! yes, once you start doing this crap it gets tough to prioritize... I still want to do a bumper/winch and rear air lockers. Next spring maybe.
     
    Steamin, Aug 23, 2019
    #24
  25. Aug 23, 2019 at 11:53 AM
    #25
    bigzrs01

    #25
    bigzrs01 New Member

    Joined:
    Apr 9, 2018
    Member:
    #14323
    Messages:
    375
    Gender:
    Male
    First Name:
    Zack
    Charlotte, NC
    Vehicle:
    2018 Cement CM
    My list is forever changing and growing, ugh lol. Things as simple as a 12v constant, to frac, 2nd Row underseat storage, gears, 37’s, it’s just goes onnnnnnnnn!
     
    bigzrs01, Aug 23, 2019
    #25
  26. Aug 23, 2019 at 12:07 PM
    #26
    TXTundra2722

    #26
    TXTundra2722 Pipe Hitters Union

    Joined:
    Nov 26, 2018
    Member:
    #22236
    Messages:
    1,763
    Gender:
    Male
    Texas
    Vehicle:
    2015 Black Tundra
    I want 37s next. .. but also want glass fenders and 37s need re gearing so the spending never stops
     
    TXTundra2722, Aug 23, 2019
    #26
    bigzrs01[QUOTED] likes this.
  27. Aug 23, 2019 at 12:15 PM
    #27
    15whtrd

    #27
    15whtrd Mr. Blonde

    Joined:
    Sep 20, 2015
    Member:
    #1829
    Messages:
    9,376
    Gender:
    Male
    First Name:
    Sean
    SoCal
    Vehicle:
    White 2015 Tundra DC SR5 TRD 4x4 5.7L, White 2003 Sequoia 2WD
    TRD Pro suspension, +2 Coachbuilder shackles, 2015 TRD Pro headlights, 20% ceramic tinted windows, clear ceramic tinted front windshield, aFe drop in pro s dry air filter, TRD airflow accelerator, TRD oil fill cap, TRD 18 psi radiator cap, BDX Bullydog tuner, Weathertech floor mats front and rear, rear seat fold down mod, DNA hard trifold tonneau cover, Linex with uv protection, TRD rear swaybar, TRD center caps, TRD Pro grille insert with color matching surround and bulge, TRD PRO headlights, aluminum oil filter canister, Real truck tailgate seal, Pop-n-lock tailgate lock actuator, rear diff breather relocate, RCI front skid plate. 275/70 R18 BFG KO2s
    Where are the plastic tabs from your bumper cover? From the installs I’ve seen those usually sit on the outside of the skid with some quarter inch carriage bolts.
    087D15B9-A4E0-44EB-A882-FB2349C86AC8.jpg
    The reason I mention it is I have an RCA skid that is missing a little bit of hardware and I am trying to get creative with the final mounting of those plastic tabs. In the instructions it sounds like you mount those little carriage bolts with a nut and bolt to the skid. Then you add A washer on top then the plastic tab then another washer and nut. Almost like it’s spaced away from the skid. But when I removed it off of @Pinay truck for her it just had the carriage bolts with a nut and washer and the tabs bolted down. Her hardware kit was missing some parts when she had it installed.
     
    15whtrd, Aug 23, 2019
    #27
    Pinay likes this.
  28. Aug 23, 2019 at 12:25 PM
    #28
    Pinay

    #28
    Pinay New Member

    Joined:
    Sep 14, 2018
    Member:
    #19379
    Messages:
    15,658
    Gender:
    Female
    First Name:
    Monet
    Vehicle:
    2015 Black - SR5 - CrewMax - 4x4 - TSS Dirty Seven Club
    Mahal kita Kuya
    Hmm...I want to say I was missing the half moon washers and doubled up with two washers from Ace
     
    Pinay, Aug 23, 2019
    #28
    15whtrd[QUOTED] likes this.
  29. Aug 23, 2019 at 12:27 PM
    #29
    Steamin

    #29
    Steamin [OP] New Member

    Joined:
    May 4, 2019
    Member:
    #30077
    Messages:
    30
    Gender:
    Male
    Colorado
    Vehicle:
    2017 silver tundra crewmax 5.7 Trd trim
    Bought new June 2017. Mods done May-June 2019 (I got busy, and boy am I happy): *Elka 2.5 coil overs front, elka 2.5 rear both with reservoir cylinders: https:/us.elkasuspension.com/product/2-5-reservoir-front-rear-shocks-kit-for-toyota-tundra-2007-to-2017-2-in-to-3-in-lift/ (set to Elka factory settings, with built-in compensation for lean, 2.5" of suspension lift in front). (Bought from Toytec, installed locally) *Total chaos UCA: (bought Toytec, installed locally) *New rear leaf spring pack: don't have link (provides about 2" of lift and stiffens things up a little bit) *35x12.50 Falken on 20" MR 309 Grid "race" wheels (Really, really regret that I didn't get 18" or even 17" wheels. Like the look and road performance, wish I had more rubber to play with on the trail, poor choice). *Stealth light bar in grill valance: https://www.roughcountry.com/toyota-30in-led-bumper-kit70655c.htmlgclid=CjwKCAjwuqfoBRAEEiwAZErCshDWqD9kgBWOkMW3JR7J4Q0STQuMzrP2CZ5pWdlsICepeiPyVB4M-xoCWEwQAvD_BwE (this thing is bright, and almost drowns out my high-beams even at distance. It cost about $250... I have no idea why anyone would spend over 1K on a rigid bar) *LED projector headlight bulb replacement: (gotta find the link) *Headlight Revolution LED fog light replacement: https://headlightrevolution.com/2014-2017-toyota-tundra-led-fog-light-bulb-upgrade-gtr-lighting-ultra-series/ (similar to post above about the bar... these are expensive, but about 1/3 of rigid, and plenty bright for both on and off-road use) *Dark window tint (matches the rear and back window, so quite dark). *stubby antenna (Don't do this if you live in a rural area without XM, it looks cool, but like much of it's ilk, it isn't functional and you lose signal easy. My long antenna whistles above 80 mph though and I have satellite radio). from Ebay June 2017-July 2019 *Chrome delete (this wasn't easy or particularly cheap, and I started 2 years ago, just did the bumper ends ). Done: grill surround, pro-grill insert, badge overlays-matte black, Front bumper ends, 1d6 color matched bumpershellz (messed up the install, made it waaay harder than it is, found the directions once they were on and one was cracked), rear bumper came color matched. Most were used parts found locally or on ebay. Next up: In the next two weeks: -RCI Skid plates -RCI Rock Sliders both to be installed by Toytec in Denver Later (whenever I can pull it off without my wife killing me): *Front winch bumper *Rear arb air lockers *Exhaust upgrade: Bam 8" or OEM PRO *Rear bumper replace Seems there's always one more thing to do...
    Yep, things were a bit messy down there... my bumper has been used.
     
    Steamin, Aug 23, 2019
    #29
    15whtrd[QUOTED] likes this.
  30. Aug 23, 2019 at 12:31 PM
    #30
    15whtrd

    #30
    15whtrd Mr. Blonde

    Joined:
    Sep 20, 2015
    Member:
    #1829
    Messages:
    9,376
    Gender:
    Male
    First Name:
    Sean
    SoCal
    Vehicle:
    White 2015 Tundra DC SR5 TRD 4x4 5.7L, White 2003 Sequoia 2WD
    TRD Pro suspension, +2 Coachbuilder shackles, 2015 TRD Pro headlights, 20% ceramic tinted windows, clear ceramic tinted front windshield, aFe drop in pro s dry air filter, TRD airflow accelerator, TRD oil fill cap, TRD 18 psi radiator cap, BDX Bullydog tuner, Weathertech floor mats front and rear, rear seat fold down mod, DNA hard trifold tonneau cover, Linex with uv protection, TRD rear swaybar, TRD center caps, TRD Pro grille insert with color matching surround and bulge, TRD PRO headlights, aluminum oil filter canister, Real truck tailgate seal, Pop-n-lock tailgate lock actuator, rear diff breather relocate, RCI front skid plate. 275/70 R18 BFG KO2s
    It looks like you were missing three-quarter inch fender washers and three locknuts as well. Just by looking at the online instructions. It really doesn’t matter that much I’m just OCD LOL just need to make a trip to the hardware store.
     
    15whtrd, Aug 23, 2019
    #30
    Pinay[QUOTED] likes this.
Page 1 of 2
Register FREE to Reply!

Products Discussed in

TRIAX Synergy Gear Max 75W-90 GL-5 Limited Slip, Ultra Long Drain 500k Miles, Manual Transmission, Gear/Differential Lubricant (1 Gallon)
$38.49
KENWOOD DNR1007XR eXcelon 10.1" High Definition Navigation Car Stereo Receiver with Capacitive Touch Panel
$1,599.00
Outwater Plastics Black 5/16"X 7/16" X 3/64" (.047") Thick Styrene Plastic Extruded 90 Degree Angle 36" Lengths (Pack of 4)
$32.95
20 Pcs 1 1/2 OD x 3/8 ID x 1/4" Thickness Rubber Spacer Flat Rubber Bushings Neoprene Washers for Screws Bolts Faucet Household Appliances
$14.99
Dayco Accessory Drive Belt Tensioner Pulley - 89016
$24.32
Steelman 8-Piece Brake Lining Thickness Gauge Set for Mechanics, Use with Disc and Drum Brake Pads, Color-Coded, Steel, Stamped Metric and SAE Callouts
$12.20
Cup Holder Divider and Hide for 2022+ Toyota Tundra, Anti-Tipping Insert (Matt Black)
$15.99
Valvoline FlexFill Advanced Full Synthetic 75W-90 Gear Oil 1 QT Pouch
$15.48
EPAuto Spill Proof Radiator Coolant Filling Funnel Kit
$22.87
ATP Automotive AT-205 Re-Seal Stops Leaks, 8 Ounce Bottle
$20.49
PTR62-0C180
$259.00
TRD Rear Sway Bar
$401.00
MaxxHaul 70231 Hitch Mount Pick Up Truck Bed Extender For Ladder, Rack, Canoe, Kayak, Long Pipes and Lumber) , Black , 37 x 19 x 3"es
$59.99
GEKRY USB 3.0 Hub, USB Data Hub, Metal Case Mountable 7-Port Powered USB Hub 3.0 with 36W AC Adapter-Type A
$43.98
5Pcs 12V Waterproof Push-Button On-Off Switch, Carbhub 12V Waterproof Push-Button On-Off Switch with 4" Leads for Motorcycle/Auto Car
$9.38
Far West Auto Towing Mirrors for Tundra 2007-2021, For Sequoia 2008-2017 with Power Glass Heated Arrow Turn Signal Light Blind Spot Light Manual Fold Telescoping Tow Mirrors Pair Set
$329.99
HIGH FLYING for Toyota 4Runner 2014-2024, Tundra 2014-2021 Steering Wheel Replacement Part BLACK Perforated Leather No Strip (With Heating Function)
$390.00
Kewig 12V USB Outlet Car Charge, 108W Super Fast Dual PD3.0 & QC3.0 3-Port Multiple Port for Car, USB C Cigarette Lighter Replacement 12 Volt Socket Waterproof for Marine Motorcycle RV Golf Cart
$13.99
MMB Mini Wireless Carplay Adapter, 2025 Carplay Adapter for Apple iPhone, Plug & Play, Smallest, Fastest for Converts OEM Wired to Wireless Car Play Only for Car Model 2017+ and iOS 10 USB & Type-C
$51.99
Timloon HDMI Socket Mount Cable +USB Audio Input Audio Relay Use for Toyota（Type A）
$19.98
OAUTOO 12pcs Transmission Drain Plug with Gasket Kit for Toyota 90341-10011, 35178-30010 4Runner Corolla, Land Cruiser, RAV4, Sequoia, Tacoma, Tundra, Fits Lexus GS GX is LC LS LX RC SC 1978-On
$11.99
RealTruck AMP Research PowerStep Power Running Boards with LED Step Lights for 2007 - 2021 Toyota Tundra Crew Cab/Double Cab/Extended Crew CabCrewMax - Electric Powerstep & Retractable Truck Steps
$1,586.99
12204-38030
$14.95
POP & Lock - Toyota Tundra Heavy Duty Power Tailgate Lock with Plug and Play T-Harness
$130.41
Kenwood DMX1037S 10.1" High Definition Car Stereo Receiver with Capacitive Touch Panel
$1,499.00
HIGH FLYING for Toyota 4Runner 2014-2024, Tundra 2014-2021 Tacoma 2012-2023 Steering Wheel Replacement Part BLACK Perforated Leather No Strip (No Heating Function)
$225.00
Tuffy Security Console Safe - Compatible with Toyota Tundra 2014-Current
$199.00
Car Center Console Air Outlet Trim Cover Compatible with Toyota Tundra 2014-2021 Center Console Air Conditioning Panel Trim Cover Air Outlet Vent Frame Panel Protection Cover Decorative Accessories
$59.99
Toyota Oil Drain Plug Crushable Steel Gaskets Set of 10 OEM 12157-10010
$14.25
SYLVANIA - 3157 ZEVO LED White Bulb - Bright LED Bulb, Ideal for Daytime Running Lights (DRL) and Back-Up/Reverse Lights (Contains 2 Bulbs)
$19.75
Toyota Genuine Transfer Case Gear Oil LF 75W 1 Litre 08885-81080
$100.26
LOOPROPE 5LRO-C-2PK-C Orange 5' Tie Down, (Pack of 2)
$34.99
OPL5 2PCs Truck LED Running Board Lights Sequential Amber Side Marker Light 70" Emergency Extended Crew Cab 216 LEDs Waterproof Flexible Turn Signal Light Bar for Pickup Trucks Car (70in)
$34.69
Magimaker 84820-0R040 Power Window Switch Control Panel Front Left Driver Side White LED Lighted Compatible with Toyota Tundra 2007-2021 Replace 848200R040 Master Window Switches
$33.99
KONNWEI KW208 12V Car Battery Tester, 100-2000 CCA Load Tester Automotive Alternator Tester Digital Auto Battery Analyzer Charging Cranking System Tester for Truck Marine Motorcycle SUV Boat
$29.99
Professional Heavy Duty Hog Ring Pliers (with 3/8 Stainless Hog Rings)
$34.99
AUXLIGHT Car Accessories, 3PCS LED Center Grille Raptor/Marker Lights For Toyotaa Tundra TRD Pro Grill 2018 2019 2020, Come with Wiring Harness & Add-a-Fuse & Screws (Amber)
$31.98
USUPERINK Bike Alarms for Ebikes, 2Pcs Wireless Bike Alarm with Remote, Anti-Theft Bicycle Motorcycle Alarm Wireless Security Vibration Motion Sensor Alarms, IP65 Waterproof Super Loud 113dB
$31.99
3mirrors Oil Filter Wrench, Drain Tool Set, Engine Funnel Compatible with Toyota Lexus Scion Camry Tundra Highlander Sienna 2.0-5.7L Engine with 64mm Cartridge Style Oil Filter System
$29.99
REXING JETSPEED Black 78W PowerDrive+ USB-C Car Charger, 2 Port QC3.0/PD3.0 for Dashcam/Android/iPhone/iPad/MacBook/Windows Fast Charge Dual Cigarette Lighter Adapter
$29.99
Hog Ring Pliers & 150 Galvanized Hog Rings, Professional Upholstery Installation Kit
$34.99
uxcell 12.6"x9.5"x2.3"(320mmx240mmx60mm) ABS Junction Box Universal Electric Project Enclosure
$33.19
To Top