Can the swing cases fit with?????

I have the Extang 2.0 Hard top Cover with the raills. I was just gifted the Swing Cases & is wondering can they be mounted with my top bcuz the clamps are right where the bags go has anyone installed these with the same top

 

Swing bags? Is this slang for swing cases?

 

Yes it's the Swing Cases

 

Cant speak on this b/c have not seen the cases configured yet. From what I read enough clearance exist for covers. Someone will chime in

 

I have a similar concern. I have the Truck Gear (Bakflip MX4) cover that has the drop brackets for the OEM rails.

Does anyone have the Swing Case installed and can measure the height from the bed floor to the top of the case?

 

I have a back flip with the swing out tool boxes (right and left side) and both work perfectly. there is about 3-5 inches of clearance above the swing case and the top.

 

Do you have the rail relocation feature on your cover? This is the set of brackets that lower the stock rails to clear the cover. My concern is that this impacts where the swing case would need sit.

See the picture here:
https://bakindustries.com/cache/ex_...argoMgmt_Rail_Bakflip_Relocation_Brackets.jpg

 

Yes I do have the rail drop feature. It has been a PITA on some other projects I have done with the truck, but not with the swing bags. see pics.

 

Awesome! Thanks for this.

 

There is another tread from someone installed the swingcase with the Extang SolidFold 2.0. The handle for the clamp does need to be trimmed:
https://www.tundras.com/threads/swingcase-with-extang-solidfold-2-0.29800/

 

@Duneflyer, thanks again for the good info.

Here is my install for reference: