Toytec boss lift with spc control arms

Hello forum, I have a toytec boss kit and spc arms. It looks like the spc arms are longer than stock. Can I go to a 285 or 295 70 18 on stock rims. I actually like the stock wheels but would like to avoid spacers. If I went aftermarket I would buy 18’s anyway. It’s a 2015 crew max.

Thanks all

 

Go with a 275/70/18... what about the 285 or 295 do you like?

 

Tag

 

The height of the 275/ 70 is only a 33 inch tire. I was hoping to run a 34 but maintain the same height to width ratio. It’s really more about looks than performance. I was hoping to find out if anyone has done it because the set up I have is somewhat common.

 

285/75 is just right in my opinion. Dont want rock chips on my truck

 

I run 285/70 which is a 34. I run a +1 offset so my wheels are flush with my flares. Are your wheels sunk in? They will look funny one the Boss kit lifts it up.

 

I am surprised at how much my 33 and some change inch tire fill the wheel well. I think its just about a 33.4 inch tire, don't quote me i would have to double check.

 

I have the boss & spc combination with 285/65/20s. I used a 1" spacer but I'm pretty sure I would have cleared. 295s would likely rub the SPCs without a spacer.

 

295/70r18 with no wheel spacers should fit. Spacers would just be for stance if you got them

 

Thanks guys, I got what I need. Can I ask fish2eat what the brand and type of tire he is running. Truck looks like what I am looking for.

Thanks

 

Looks like he is running some Goodyear Duratracs.

 

Yep, those are DuraTracs. Decent tires.

 

Thanks