What have you done to your 2.5 gen Tundra today?

Um where did u buy this set up

 

Looks great. What was the Plasti-Dip color?

 

Got the truck and the wife’s car washed.

 

removed the 2' front lift and the 1" rear blocks and installed 5100's up front at the lowest setting....fairly easy job....best part about it, no more vibrations at take-off and 60-65mph.....also removed the carrier bearing drop spacers. I am convinced it is the only way to stop all vibrations. the ride is stiffer than the original 4600's but I can deal with it

 

@flinky14

 

You probably had too large of a spacer. I have a 3/8” spacer in mine and it’s smooth as silk with 1” shackles.

 

Just finished installing my Baja Design amber fog light kit. Couple small mistakes/missed steps but nothing that should make a difference. Actually barely any gap when I finished adjusting them.

 

It’s just black (left over from doing the emblems).

 

nope, I tried every size imaginable from zero to 1"

 

Like to know what powder they used. There are 'high temp' powders that should be good to 1000 F. Some are used on exhaust manifolds so should easily handle a tip.

 

toytec/eibach 3" in front, 1" block in rear

 

thanks!

 

Well blocks can change your pinion angle. So cb wouldn’t have made a difference if you didn’t correct the pinion angle. Another reason shackles work better because they don’t affect the pinion angle.

 

Went to Cataloochee to have a family cookout and had a guest we didn't expect. Stood and watched us eat.

 

To take the whole thing out takes 2 sec., to paint it about 30 min, after, you earned a beer, does this help regarding your lack of motivation?

 

Took her fishing

 

Washed her and the stepdads 100 year anniversary Silverado

 

Caught the blue angels in formation over the tundra. America!

 

Davenport this weekend?

 

Yessir

 

Installed a remote switch for the inside set of lights on the front light bar. Thought I'd try it instead of wiring them thru the firewall. I like it and it was simple. Got power from the fuse box. Now I'll put the other set of lights on another remote. The inside lights are pencil beams and the outside are floods. Can't wait to check them out at night.

 

Washed it. Also put black vinyl on center caps and stuck the Toyota emblems back on, makes the plastidip job look less cheap. I will paint the emblems or get decals like the ones @Major has if I can find some.

 

Love the wheel color in contrast to the blue of the truck.

 

That's my plan man. @2ndgenny suggested the same thing and I absolutely think you guys are right. Unfortunately vinyl doesn't stick to plasti dip so I'd have to do one of 2 things, 1- cut and peel the dip in the area that I want black, then wrap it, which may lead to failure of the dip, or 2- mark off those areas and dip black over the gold, which is likely what I will do, itll look awesome imo

 

De-badged and washed today. 98% I’m removing that rear sticker and going fully clean look. Gonna stare at it for a day or two first. Picked up this foam cannon at Wally World for $16 and it actually worked really well.