Chrome Delete Covers for Tundra Bumpers - BumperShellz

Got mine today! Now I have to stare at them while I wait for @Caliraisedled to send me my fog lights

 

TPO's without sensors have been shipping out a couple at a time the last couple days as we finish them up. We should be able to get the bulk out tomorrow with the rest of the stragglers shipping Monday.

 

CEMENTS!

 

Did the first cements get shipped out today?

 

That’s the sexiest thing I’ve seen in a while. Only thing that would make it sexier is my tracking # attached to a set.

 

Please post pics of some Silver Sky skins in the paint booth

 

Mine arrived today, installation tomorrow, followed by pics...woot!
G

 

I haven't yet read if you had a reply to this yet. But I can say that TPO is extremely close to the OEM center bumper plastic, I think that some would say its a perfect match. Yes in the pic the @Silv333 posted the TPO ends look a bit grayish. On my 2014 with the sun faded center plastic, my OEM center piece looks grey and the TPO Bumpershells are definitely black.

I just got mine delivered and have only done a dry fit on the drivers front and rear. They are awesome! My OEM centers looked grey because of sun fade. I rubbed some plastic treatment on my center piece and there is almost no difference. The main thing is the the texture is nearly spot on.

Also a quick thank you to Bumpershellz for sending me a replacement passenger rear before I even noticed that there was a discrepancy in the sensor hole placement. Great customer service!

 

Lol I also broke those brackets and bought them again bit beware the new brackets dont fit perfect where the 10mm bolts go into the new Bracket the clip is smaller and won't slide all the way in I had to use a dremel u will see what I mean

 

@Boxer310 @hypa I also broke this stupid bracket on the driver's side. So I aborted as we're taking my truck to the beach and I didn't want any issues. It went back on fine although that bracket completely broke apart that slides onto the bumper tab. Do you happen to have a part #? Looked with no luck.

 

@Finch @Boxer310 what did y’all do to break those?

 

Once removing the all the screws from the bumper or fender liner (whichever its called), I broke it trying to remove it from the bumper. Its hard to tell from the pics but the piece I broke slides onto the bumper tab. Evidently its pretty easy to do. @VTYOTA messaged me that he did the same thing. He installed his back and haven't had any issues. I may continue on with the install and see how it goes.

 

@dawgfan706

 

So, do you have to remove the bumper to install these? I thought they just went on over the current caps and obviously would need to remove the stock screws and put them in through the new caps.

 

No, you have to remove that inner fender plastic. At least I do in order to get to the front bunper sensor to unplug. Heres a pic with the inner fender plastic removed and the shell is in place (dry fit).

 

Ok cool, that makes sense.

 

Driver side part number for bracket.

 

With off road package
53882-0C060
53883-0C050

With out of road package
53882-0C050
53883-0C040

Seeing this I think I bought the ones with off road package that probably why those tabs were to small to slide in and I had to break them off again to slide over then insert the screws I wonder if the ones with out off road package have the right size tabs...anyways even though my tabs broke i was able to insert screws on the new bracket cause the nut on bracket was still good..good luck hope this helps

 

And even though the bracket brakes off it's no big deal as long as the nut on the bracket is not stripped then u good my problem was I also stripped the nut on the original bracket..the taba are just to hold the liner while you put the screws in but if the screws go in with or without tabs and tighten then you good to go

 

Thanks for the part #s. Thanks to a little pep talk from @VTYOTA I went ahead with the install. Looks good I think. The hardest part for me was getting that inner fender plastic reinstalled. Took a little patience.

Btw...these are the TPO covers.

 

Looking

 

Boom!
G

 

Yep...broke one of the tabs on mine too, but was able to get the screw back in & secure the top. Might have to get longer screws for the bottom ones though

 

Chrome gone!
Got the new grill & bumper covers done last night! They had to ship new rear covers as the sensor holes didn't line up quite right, but @EC1 made things right!

 

Awesome look!
G

 

I’ll add my inferno new look to the crowd...



Looks like it’s time to order myself a new grille and some headlights this weekend!

 

I think all you inferno guys are nuts for not going OEM on the covers...

That color is en fuego!!