What have you done to your 2.5 gen Tundra today?

Removed TSS stickers

It was exhausting....took like a whole 12 minutes

 

I like that. How did you remove it?? Just rip it off?

 

I would not advise you RIP it off...lol.

Honestly, it was a breeze. DO NOT apply heat as most suggest. It literally peeled off slow and easy with no heat. Outside temp was around 80 deg. Absolutely no residue left behind. The heat would actually cause it to leave residue.

 

I might need you to come by house.... Cant get my grass right since Harvey

 

Great lookin' truck. You got her shined up!

 

What size ridge grapplers are you running? Now I want to powder coat my wheels...

 

Hey whats your lift setup? Are you running 33's? I have the same wheels and same color truck. You just gave me an idea of how I am gonna look within the month.

 

Replaced the missing drip molding on the roof today...another box checked.
G

 

285/60r20's. I have a Rough Country leveling kit and had to cut the wings off of the skid plate at the sway bar area. I knew that going in because I wasn't using spacers and the +60 factory offset keeps those tires under there a bit.

 

Right on. I wanted to go with 285/60's but got cold feet bc no one had them when I bought my tires. Looks really good and about the perfect size. I'm digging the powdercoated wheels too. Are they satin black? Also, you might look into a RCI skid plate a) to help you change your oil with the trap door in the new skid plate and b) they are a bit narrower so it would probably help a the clearance issue with 285's

 

Right on. Wheels are Matte Black. Thanks for the info!

 

Can you post a picture?

 

Added the TVD vinyl decals. Not much but i like the look. I have them on the rest of the chrome letters.

 

I just did mine!

I screwed up on my first attempt, but you get three in the kit, just dry applied transfer vinyl, no need to do the wet method. Kind of a pain to line up the letters but not terrible.

 

Not too hard. They are vinyl stickers but you have to be careful. The first one went on great but i screwed the second one up but they send you three of them.

 

Picked up my truck from the stereo shop today got a full jl system installed 2 pair of jl c2650 two way components for the doors 2 pair of c1 tweeters for the dash 2 jl 10 tw3-8 subs for behind the back seat 1 jl xd1000/5 amp and 3 layers of soundproofing on each door and behind the back seat !!! Mind blowing sound system now for the advise part never let them do a install like this hourly I made that mistake and am still in negotiations with the owner cuz it took way to long to do and they want alot of money lol in hind sight I should have only done 2 layers of sound dampening Haha and had a set price btw the labour bill I got was over 3k and I'm not paying that that's for sure

 

Added a couple small little customization's. Not the most original, but I like the outcome. I included links to the products I bought, in case any of you out there are interested. Enjoy a few pretty pictures!

https://www.amazon.com/gp/product/B07DW7TL86/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

$25 RYDONAIR Short Antenna Compatible with Toyota Tundra 2000+ & Toyota Tacoma 1995+, Internal Copper Coil for Enhanced Reception, Car Wash Proof, 7"es Rubber Antenna Replacement

https://www.amazon.com/gp/product/B07MQDV435/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1

 

Some last minute prep for Overland Expo West 2019..













After going to 17” rims and 35” tires, it was time to properly trim the bumper!

 

Added an ICON Stage 3 to the mix with some Falken Wildpeak AT/3W in 295/70R18. The AAL gave me 2" in the rear and I haven't adjusted the coilovers from the factory preload because it looked pretty level out of the box but there's a little bit rubbing on the at full lock on the passenger side front bumper. Probably need to go up an inch on the coilovers to clear everything, already removed the front mudflap and pushed the plastic in. May need to follow @itsdchz lead and trim those bumper caps just because. Overall I am pretty happy with the way it is turning out.

 

How do you like your tie down cleats? Do you use them that much? I am looking into something like this but have thought about going for a full-bar type style.

 

@bhuff92 Honestly at first I wasn't a fan of the look having all the cleats all the time, but it's grown on me. I find myself using my Diamondback cover more than I thought. They are super convenient and if something doesn't fit in the bed it can get strapped down and I'm good to go. Just last week I picked up a queen size mattress and bunkie board for my niece and just threw it on top and strapped it down and I was on the road again. A few weeks before that I bought a 96gal trashcan and just threw it on top and few straps and I was good. Granted if I didn't have the cover it would have just laid over fine in the bed but the advantages of the cover definitely outweigh those few and far between situations for me and if it won't fit under the cover it will definitely fit on top of it. Plus, every shop it's been in so far it has always gotten compliments on it and the people are impressed with it.

 

Got it at O’Reillys for like $15

 

Hope everyone is doing well today

 

I added a new background to mine. Lol.

 

My TSS sensor has been going crazy. Got the update done last week and now its back in this morning for the same issue. Hopefully get it back today or tomorrow. This is getting pretty irritating since the truck only has 2000 miles or 3300kms. My level, wheels, and tires are waiting.

 

How’s the reception on that antenna?

 

Replaced the chrome badging with black ones.

 

Got my Tufskinz order and did the "install" today. Really glad that I chose the blue. I did the gray for the vent rings, and I'm a little lukewarm on those. I may end up going the plastidip route on those if I really decide they need to match my plastidip around the shifter and cupholder. I also went with the fake carbon fiber B-pillar accents. I think they look decent, but they don't line up perfectly with stock - probably most people would not notice.

By the way, does anyone know what the extra dash piece is from Tufskinz? There is no where for it to go, and I'm perplexed on why it was with the kit they sent. It's the piece laying on the center console in the 2nd pic.