Chrome Delete Covers for Tundra Bumpers - BumperShellz

I was post #753,hope this puts me in on the group buy!! MGM rear set

 

Post #788. Mgm front set with sensor holes.

 

Post # -001 Front TPO with holes...lol
G

 

Post 498

 

Any way you could post the instructions for the fronts so the rest of can get prepared?

 

Since others are putting up their post number here is mine...Post#946. Front Only with sensor holes in Super White 040.

 

There’s nothing really to prepare for. Just get the 10 and 12mm socket ready, rubbing alcohol, a tiny flat screwdriver for popping the tiny clips so you can remove the sensors, masking tape, and a hair dryer.

The directions are very straightforward.

 

Strategy!

 

What's up with the masking tape and hair dryer?

 

On the reverse side of the green line there’s two strips of 3M tape (not sure official name but it’s the good shit). During the process you will take just a part of the backing off the tape and tape it to the front of the shell using the masking tape. One of the last steps is to then pull the rest of the backing off using the strip taped to the front.

The hair dryer is used for heating the install surface prior to install. Rubbing alcohol is for prep.

 

You have any close ups of the edges where the chrome might peek through? Also any close ups of the fog light bezels? I have rigids in for my fogs and may switch to bajas soon. Just wanting to make sure nothing will interfere. Thanks for the info bud

 

Posted pics earlier of the “c” hair of chrome peaking through. No closeups of the fog lights. Will post those tomorrow.

 

I just saw your pics. No clue how I missed them, sorry. Thanks. Truck looks great BTW

 

Thanks man, I’ll snap some pics of the fogs tomorrow if you still need them.

 

My original post #314, super white front only, WITH sensor holes.

 

Post #925

 

Sounds like the installation involves some 3m tape. For the guys who previously plasti-dipped the end caps should we remove the plasti-dip before installing these?

 

Not sure what the manufacturer will say, but I did a spray vinyl on the chrome originally and removed it a few months ago. During prep, I noticed more of that vinyl so I made sure it was all off.

I did three different scrubs of the bumper with rubbing alcohol, heated it up per the instructions, then installed.

 

#139 for cement no sensors

 

I'm in for the group buy. Original post #386 (changed my mind on color) and posted #1097.

TPO Front & Back w/ no sensor holes!

 

Thanks- I was being slightly sarcastic about preparing....I’m just getting antsy, lol.

 

I was post #759... not sure if that’ll make a difference, but everyone else seems to think it will.

 

Original post #891

 

Did you just apply a little heat to form the plastic?

 

Post # 1138

Front and Rear w/ no sensor cutouts.

Textured black TPO

 

POST # 353

MGM Front and rear covers.

NO sensors.

TY.

 

What are these going to cost? I need the front end caps in MGM with the sensors to finish my chrome delete.

 

I am newly registered here however have been following this thread for a while now. I have investigated a number of options to eliminate the chrome bumper ends from my 2017 inferno TRD Off Road (linex/powder coating/full replacement) and thus far the most economical and less involved vs bumper disassembly is the end cap covers discussed here. I have emailed Bumpershellz/ecoological twice now but have not rec'd a response. I'd be curious if the manufacturer will ship to Canada (Toronto)? anyone else in this predicament?

 

Sorry nobody's gotten back to you yet! I know the sales department is swamped right now, so I'm not entirely surprised that some emails are falling through the cracks. We will be shipping to Canada. I'm not sure on pricing yet for this particular package size to Toronto.

 

Yes, you are going to want to remove plastidip. This bumper should be the cleanest it's ever been for the best adhesion surface... And I would say yes to removing plasti-dip in general