What have you done to your 2nd gen Tundra today?

Nice!

 

Nice find!

 

Washed the the big red best and threw on another coat of Bead Maker. Man, I love that stuff!!!

 

tundras.com decal

 

Yes! True quality parenting, showing them how to flex at an early age!

 

@Fishin RGV-Trd Pro

 

That’s what parents do. The best for their kids to pass on the same to their kids.

 

Haha can’t beat Lego!

 

Changed out the T-stat. I thought that maybe it was sticking open after initial warm-up. Still testing today, maybe. Might just sit around instead.

 

What did use for the garage door opener? Other than the switch.

 

took the steps off for a "free" lift!

before:


After:


also slapped a little red Plasti-dip on the tow hooks

 

Killer sequoia

 

I changed my rear diff fluid using mobil 1 75w90 and cleaned my breather (which was pretty gunked up). Found some interesting chunks on the drain plug. I'm sure the fluid has never been changed since I'm only at 120k so I'm wondering if this is normal. I know sometimes cast parts can have edges break off from the mold if not ground down properly after casting. Any opinions?

 

Pulled the bed to install the new fuel pump. Then reinstalled the bed because you can't access the fuel pump without pulling the tank. Dropped the tank and installed fuel pump. I wish I had time to clean the frame while the bed was off! Had to put the bed back on while I had 5 willing helpers though. Fuel pump job is still pretty easy on my truck though. 233k miles and absolutely zero rust! I love this truck!!!!

 

Wife and kids went out of town and left me and my Tundra to make love in the garage.

Dasaita 10.2” Android Head-unit:


LED light strip to illuminate step bar:



Added front facing camera:





Added fog lights:




Then washed and waxed her.

Still need to change out my passenger side HID bulb as there is a weird color shift / color difference with that bulb.

And my headlight levelers couldn’t be installed because the seller sent me a harness that had two female plugs...no worky.

 

I love this HU. Plug and play with my JBL system. Also has CarPlay adapter, so google maps, pandora, etc.



My wife loves it too, but loves the LED step lights more as she keeps either missing them in the dark or slips not knowing they are wet. Now she can see.

 

Very nice.

 

I used my garage door remote opener. I have a diagram at home I will post up when I get home.

 

nice ! did you run the front camera wire through the firewall hole on the driver side ? I need to install one on my new HU

 

This camera fits right inside the Toyota logo on your front grille...


CAIRUTE 420 TVL HD CMOS Car Front View Camera Night Vision Parking Cam with 170 Wide Degrees Logo Embedded for Toyota

CAIRUTE 420 TVL HD CMOS Car Front View Camera Night Vision Parking Cam with 170 Wide Degrees Logo Embedded for Toyota

https://www.amazon.com/dp/B07DC139L8/ref=cm_sw_r_cp_api_i_ZLh0CbY217SZP

 

Ebay has it for a few bucks cheaper https://www.ebay.com/itm/420TVL-Car...Degrees-Logo-Embedded-for-Toyota/173456444280

 

what did you tap into for ur step lights

 

Yep ran wire along grill to drivers side, then zip tied and wrapped up the hood. Tucked out of the way where it doesn't look too out of place.

NOW you tell me!! lol. I'm fine with this one. I put a small hole under my current logo and cut out a small piece of my grill. But this is a good option if I ever change out my grill for a OEM limited grill.

Brown cargo light wire. Drivers side, rear passenger door. Pull up door sill, open loom and its the skinny brown, not the thicker brown, wire. I inlined a 10A fuse to the lights just in case.

This way step lights come on any time car is locked/unlocked or doors are opened.

And If am feeling especially Fast N Furious, I can turn them on going down the road with the cargo light switch.

 

What kind of LED lights did you use? That seems to cast a nice pool of light

 

Unfortunately this is what I did to my tundra today!

 

Oh no!!! Everyone ok I hope.

 

Oh crap!

 

Too bad it’s not a short box too soon!?