Just installed ‘19 Tundra Pro Fox’s on my 2013 CrewMax

Just wanted to give an update. I received the 2019 Fox Pro Kit from Toyota about 4 weeks ago and just got around to installing it today. This setup is replacing SR5 black shocks and a 3/1 spacer kit on a 2013 4wd CrewMax.

I really hate to say too much just yet because I’ve only driven it about 20 miles so far...but the difference is quite noticeable already!

I finished the job around 5pm today and had an hour commute through Hawaii traffic to my house. I spent most of my time well under 45mph so my “tests” are unremarkable at best.

I’ll post up some updates soon

 

Any modifications that you had to do or was it all bolt right up

 

No mods required, bolted right up. I’m running 275/65r20 terra grapplers on oem 20” wheels. The kit did come with an ABS bracket extension for the rear axle. However I don’t think it’s necessary.

I did remove the the little mud flaps forward of the front wheels a long time ago to clear my last setup.

I highly recommend undoing the 2 lower spindle bolts, (22mm),where they connect the spindle to the lower control arm, instead of the upper spindle ball joint as said in Haynes type books. This will prevent any undo strain on brake lines and ABS wires.

I also disconnected the brake line/ABS wire brackets as applicable.

Loosening of the lower inner control arm bolts that adjust alignment was absolutely necessary this time. Be sure to mark the cam bolts before you dissemble.

Overall it was a straightforward job.

 

I wonder if those would void the PCS warranty work. A stock Toyota part but on a model that shouldn’t be lifted.

 

According to the bulletin it will due to the fact that the VIN # shows an SR5 and not a PRO. But from what we have seen it is all dependent upon the dealership. Some will still perform the work and some will not.

 

need pictures

 

Truck is dirty but here you go

 

Same height after install as the spacers that you took out?

 

Looks nice, good choice

 

I didn’t do any measuring but it did drop about an inch.

 

looks great ! quality parts

 

So

 

If you don't mind me asking, how much did that set you back? I'm interested in a better ride on my 2013.

 

$2880 shipped. Truck rides much more “cushy” on the road. Doesn’t take corners as well as it did but a fair compromise in my book. I’d say it’s probably the most comfortable truck I’ve driven.

 

I have emailed around about pricing and availability for that parts package to put on my '19 limited and was told they haven't released it for retail yet. Where did you get it from?

 

I ordered it from my local dealership in Hawaii. The parts guy has to look it up under “accessories”.

 

Very nice "accessory "..

 

Love the red springs. How much did the kit run you?

 

$2880 shipped.

 

That pic looks suspiciously like Ko Olina

 

Bingo!

 

OP has a 2013 so I'm guessing it doesn't matter in this situation. Good info for other folks tho.

 

Amazing.... To be clear this lifts a stock truck about "2 in on the front...right? And the rear you found what level;same or a bit higher than stock?

 

Yes front is approx 2” higher. The rear stayed the same since I only changed the shocks.

 

Sweet. Mahalo

Very nice