1. Welcome to Tundras.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tundra discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Tundra owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Rubbing with larger tires? Enter the Relentless Fab CMC plates!

Discussion in 'Relentless Off-Road Fabrication' started by Relentless, May 7, 2014.

  1. Oct 10, 2016 at 1:18 PM
    #61
    TheBeast

    TheBeast The Beach

    Joined:
    Apr 27, 2016
    Member:
    #3246
    Messages:
    12,518
    Gender:
    Male
    SoCal
    Vehicle:
    2012
    chop chop !
     
  2. Oct 10, 2016 at 5:56 PM
    #62
    Relentless

    Relentless [OP] Eric @Relentless Fab Vendor

    Joined:
    Jan 6, 2014
    Member:
    #19
    Messages:
    899
    Gender:
    Male
    First Name:
    Eric
    East of the Sierras(Reno), Nevada
    Vehicle:
    '14 Crewmax TRD 4x4> '15 Duramax SLT
    Just a few, more to come
    35's will make the truck actually look like a truck!
     
    T-Rex266 likes this.
  3. Oct 12, 2016 at 2:30 PM
    #63
    dcsleeper408

    dcsleeper408 BASTRDS

    Joined:
    Nov 10, 2015
    Member:
    #2081
    Messages:
    4,946
    Gender:
    Male
    First Name:
    mark
    San Jose CA
    Vehicle:
    2015 TRD PRO
    Hey Eric, any more plates in stock?
    -Mark
     
  4. Oct 12, 2016 at 2:46 PM
    #64
    CaptTyler

    CaptTyler Life’s too short to have an ugly boat.

    Joined:
    Jul 23, 2015
    Member:
    #1561
    Messages:
    1,461
    Gender:
    Male
    First Name:
    Tyler
    Florida
    Vehicle:
    2018 Ram 2500 Cummins


    I used a heat gun to push in the plastic fenders and trimmed my skid plate. That was it.




    Yes it was probably dead flush.
     
  5. Oct 12, 2016 at 4:33 PM
    #65
    Relentless

    Relentless [OP] Eric @Relentless Fab Vendor

    Joined:
    Jan 6, 2014
    Member:
    #19
    Messages:
    899
    Gender:
    Male
    First Name:
    Eric
    East of the Sierras(Reno), Nevada
    Vehicle:
    '14 Crewmax TRD 4x4> '15 Duramax SLT
    Just a few, more to come
    Plenty to go around! Last I looked we probably had 20 sets on the shelf ready to go
     
  6. Oct 12, 2016 at 4:55 PM
    #66
    CaptTyler

    CaptTyler Life’s too short to have an ugly boat.

    Joined:
    Jul 23, 2015
    Member:
    #1561
    Messages:
    1,461
    Gender:
    Male
    First Name:
    Tyler
    Florida
    Vehicle:
    2018 Ram 2500 Cummins

    Great product at a great price. Keep up the great work! :thumbsup:
     
  7. Oct 13, 2016 at 8:40 AM
    #67
    dcsleeper408

    dcsleeper408 BASTRDS

    Joined:
    Nov 10, 2015
    Member:
    #2081
    Messages:
    4,946
    Gender:
    Male
    First Name:
    mark
    San Jose CA
    Vehicle:
    2015 TRD PRO
    Eric, the website says back ordered.
    I went ahead and just placed my order.#2497
    Thanks!
    -Mark
     
  8. Oct 13, 2016 at 9:13 AM
    #68
    Relentless

    Relentless [OP] Eric @Relentless Fab Vendor

    Joined:
    Jan 6, 2014
    Member:
    #19
    Messages:
    899
    Gender:
    Male
    First Name:
    Eric
    East of the Sierras(Reno), Nevada
    Vehicle:
    '14 Crewmax TRD 4x4> '15 Duramax SLT
    Just a few, more to come
    We've got em. I'll let my wife know to update stock numbers on them
     
    dcsleeper408[QUOTED] likes this.
  9. Oct 13, 2016 at 3:36 PM
    #69
    Master_tundra

    Master_tundra New Member

    Joined:
    Nov 16, 2015
    Member:
    #2116
    Messages:
    87
    Gender:
    Male
    Vehicle:
    2017 MGM limited
    I'm running method with 25mm offset with 35 tires and mine rubs slightly at the bend at full lock. This is after I had it installed
     
  10. Oct 13, 2016 at 4:23 PM
    #70
    TheBeast

    TheBeast The Beach

    Joined:
    Apr 27, 2016
    Member:
    #3246
    Messages:
    12,518
    Gender:
    Male
    SoCal
    Vehicle:
    2012
    after the CMC plates install or the 35"s install ?
     
  11. Oct 13, 2016 at 6:05 PM
    #71
    Master_tundra

    Master_tundra New Member

    Joined:
    Nov 16, 2015
    Member:
    #2116
    Messages:
    87
    Gender:
    Male
    Vehicle:
    2017 MGM limited
    Plates
     
  12. Oct 13, 2016 at 6:12 PM
    #72
    Relentless

    Relentless [OP] Eric @Relentless Fab Vendor

    Joined:
    Jan 6, 2014
    Member:
    #19
    Messages:
    899
    Gender:
    Male
    First Name:
    Eric
    East of the Sierras(Reno), Nevada
    Vehicle:
    '14 Crewmax TRD 4x4> '15 Duramax SLT
    Just a few, more to come
    Shouldnt be rubbing with that setup, might have needed to trim the body mount back farther before capping with the plate. Or possibly your alignment needs some attention to add caster/push the tire forward a bit. Do you have pictures of the body mount? @Master_tundra
     
  13. Oct 13, 2016 at 9:10 PM
    #73
    Master_tundra

    Master_tundra New Member

    Joined:
    Nov 16, 2015
    Member:
    #2116
    Messages:
    87
    Gender:
    Male
    Vehicle:
    2017 MGM limited
  14. Oct 13, 2016 at 9:23 PM
    #74
    Master_tundra

    Master_tundra New Member

    Joined:
    Nov 16, 2015
    Member:
    #2116
    Messages:
    87
    Gender:
    Male
    Vehicle:
    2017 MGM limited
    Caster is at 3.5. Welder said, if he would of cut more into the body mount the plate would not fit flush on the back side. He said we can put a small triangle plate where the bend is at.
     
  15. Oct 14, 2016 at 8:06 AM
    #75
    Relentless

    Relentless [OP] Eric @Relentless Fab Vendor

    Joined:
    Jan 6, 2014
    Member:
    #19
    Messages:
    899
    Gender:
    Male
    First Name:
    Eric
    East of the Sierras(Reno), Nevada
    Vehicle:
    '14 Crewmax TRD 4x4> '15 Duramax SLT
    Just a few, more to come
    Ah thats it. If you look at the OP post photos you'll see; in some cases it's helpful to cut it so the bottom of the plate is pushed in a bit to help prevent rubbing. There's really no reason it needs to be kept flush on the edge of the mount so long as it isnt too large a space to weld closed.
     
  16. Oct 15, 2016 at 9:30 AM
    #76
    Dustydirt19

    Dustydirt19 Hoghead

    Joined:
    Aug 25, 2016
    Member:
    #4315
    Messages:
    1,349
    Gender:
    Male
    First Name:
    Dustin
    Duluth, MN
    Vehicle:
    2015 Blue Ribbon Metallic 5.7L 4WD SR5 TRD DC
    ProComp 6" stage 2 lift 18x9 Fuel Vapor -12 offset 35x12.5 Nitto Ridge Grapplers BullyDog Tuner Gibson Metal Mulisha cat-back exhaust, S&B cold air intake, Color matched TRD PRO Grille, Compustar Remote Start N-Fab Hooped Nerf Bars, AMI Big stick antenna, Salex organizer and tray, Weathertech laser cut floor mats, Weathertech window deflectors Black out badge Black out front and rear bumper Black out flags 24/7 black out TRD Off-road decals Spray in Line-X Bedliner Scosche phone mount Soft rolling tonneau cover TRD pedals and footrest
    @Relentless do the plates come with instructions on how to install? I don't have a welder so I have to take me truck to a guy to have him put my lift and the plates on. I know it doesn't seem too complicated but I just want to make sure nothing gets messed up.
     
  17. Oct 16, 2016 at 11:14 AM
    #77
    Relentless

    Relentless [OP] Eric @Relentless Fab Vendor

    Joined:
    Jan 6, 2014
    Member:
    #19
    Messages:
    899
    Gender:
    Male
    First Name:
    Eric
    East of the Sierras(Reno), Nevada
    Vehicle:
    '14 Crewmax TRD 4x4> '15 Duramax SLT
    Just a few, more to come
    They do not however it is quite simple. Hold the plate to the cab mount, trace the cut area, then rough cut and hold the plate back up until final desired contour/tight fit is achieved by grinding/cutting as necessary.
    Weld plate in place a little at at time, keep a compressed air blow gun handy to cool the mount between welding in order to not burn/melt the cab bushing. Repeat for second side, then paint everything thats bare metal and you're done.

    Edit: OP has a link to a post where I outlined the procedure in the thread previously a bit more in-depth as well.
     
    Last edited: Oct 16, 2016
  18. Oct 16, 2016 at 12:30 PM
    #78
    Dustydirt19

    Dustydirt19 Hoghead

    Joined:
    Aug 25, 2016
    Member:
    #4315
    Messages:
    1,349
    Gender:
    Male
    First Name:
    Dustin
    Duluth, MN
    Vehicle:
    2015 Blue Ribbon Metallic 5.7L 4WD SR5 TRD DC
    ProComp 6" stage 2 lift 18x9 Fuel Vapor -12 offset 35x12.5 Nitto Ridge Grapplers BullyDog Tuner Gibson Metal Mulisha cat-back exhaust, S&B cold air intake, Color matched TRD PRO Grille, Compustar Remote Start N-Fab Hooped Nerf Bars, AMI Big stick antenna, Salex organizer and tray, Weathertech laser cut floor mats, Weathertech window deflectors Black out badge Black out front and rear bumper Black out flags 24/7 black out TRD Off-road decals Spray in Line-X Bedliner Scosche phone mount Soft rolling tonneau cover TRD pedals and footrest
    I might have asked you this before and I'm probably gonna buy the plates regardless when I do my lift anyways but on a 2015 sr5 with a Toytec boss 3" lift, TC uca's and 295 70 18 tires will they be necessary? How about with 305 70 18 or 35 12.5 18?
     
  19. Oct 16, 2016 at 1:01 PM
    #79
    TheBeast

    TheBeast The Beach

    Joined:
    Apr 27, 2016
    Member:
    #3246
    Messages:
    12,518
    Gender:
    Male
    SoCal
    Vehicle:
    2012
    35" for sure.
     
  20. Oct 16, 2016 at 4:57 PM
    #80
    Relentless

    Relentless [OP] Eric @Relentless Fab Vendor

    Joined:
    Jan 6, 2014
    Member:
    #19
    Messages:
    899
    Gender:
    Male
    First Name:
    Eric
    East of the Sierras(Reno), Nevada
    Vehicle:
    '14 Crewmax TRD 4x4> '15 Duramax SLT
    Just a few, more to come
    295's- no rubbing, so long as you stay positive in the offset you should be fine (I was with +18mm offset 18x9's)
    With 35's or the larger 305/70/18s you will most likely see rubbing.
     
  21. Oct 17, 2016 at 1:56 AM
    #81
    Dustydirt19

    Dustydirt19 Hoghead

    Joined:
    Aug 25, 2016
    Member:
    #4315
    Messages:
    1,349
    Gender:
    Male
    First Name:
    Dustin
    Duluth, MN
    Vehicle:
    2015 Blue Ribbon Metallic 5.7L 4WD SR5 TRD DC
    ProComp 6" stage 2 lift 18x9 Fuel Vapor -12 offset 35x12.5 Nitto Ridge Grapplers BullyDog Tuner Gibson Metal Mulisha cat-back exhaust, S&B cold air intake, Color matched TRD PRO Grille, Compustar Remote Start N-Fab Hooped Nerf Bars, AMI Big stick antenna, Salex organizer and tray, Weathertech laser cut floor mats, Weathertech window deflectors Black out badge Black out front and rear bumper Black out flags 24/7 black out TRD Off-road decals Spray in Line-X Bedliner Scosche phone mount Soft rolling tonneau cover TRD pedals and footrest
    Ok thanks. I was thinking 295s with +18 method rims anyways
     
  22. Nov 2, 2016 at 7:20 PM
    #82
    xtyfighterx

    xtyfighterx New Member

    Joined:
    Aug 28, 2016
    Member:
    #4360
    Messages:
    2,357
    Gender:
    Male
    First Name:
    Ty
    North Idaho
    Vehicle:
    2015 Black Crewmax Mid Travel
    Mid travel fox 2.5 coilovers 2.0 real shocks shims 295 70 18 trail grapplers pro accessories 32in light bar blacked out bed cover sway bar Moto metal 970 18x9
    What's the promo code for these this month?
     
  23. Nov 4, 2016 at 8:25 PM
    #83
    Relentless

    Relentless [OP] Eric @Relentless Fab Vendor

    Joined:
    Jan 6, 2014
    Member:
    #19
    Messages:
    899
    Gender:
    Male
    First Name:
    Eric
    East of the Sierras(Reno), Nevada
    Vehicle:
    '14 Crewmax TRD 4x4> '15 Duramax SLT
    Just a few, more to come
    code is "TUNDRAS"
     
  24. Aug 29, 2017 at 5:03 PM
    #84
    r4z0r51o

    r4z0r51o have fallen off the forum, but I’m still alive.

    Joined:
    Apr 17, 2016
    Member:
    #3172
    Messages:
    2,000
    Gender:
    Male
    First Name:
    Dave
    Northeast San Francisco Bay Area
    Vehicle:
    2016 Silver Sky Metallic Crewmax 5.7L TRD 4x4
    22x12”HostileRage/33”NittoRidgeGrap/StealthFighter/FOX-BDS
    So thinking about a set of CMC plates ... Those that bought these and had them mounted, how did it work out for you. I'm current running 20x9 +20 offset wheels with 1" wheel spacers making me about a -6 offset with 295/60 Nitto ATII'S. Would like to go even alittle wider if I can ... What say you?
     
    dcsleeper408 likes this.
  25. Aug 29, 2017 at 6:11 PM
    #85
    TNTundra08

    TNTundra08 New Member

    Joined:
    Mar 4, 2015
    Member:
    #1027
    Messages:
    741
    Gender:
    Male
    First Name:
    Blake
    Vehicle:
    2008 DC 4x4
    3/1 lift. 20x9 Method standards, machine face. 305/55/20 nitto trail grapplers
    What kind of welder do you need? I have a gasless/self shielding mig welder. Would that do it or do I need a legit mig or stick welder?
     
  26. Aug 29, 2017 at 6:13 PM
    #86
    TNTundra08

    TNTundra08 New Member

    Joined:
    Mar 4, 2015
    Member:
    #1027
    Messages:
    741
    Gender:
    Male
    First Name:
    Blake
    Vehicle:
    2008 DC 4x4
    3/1 lift. 20x9 Method standards, machine face. 305/55/20 nitto trail grapplers
    Dang, and that tire set up works? I barely have enough room to go bigger with my offset at +18
     
  27. Aug 29, 2017 at 6:20 PM
    #87
    r4z0r51o

    r4z0r51o have fallen off the forum, but I’m still alive.

    Joined:
    Apr 17, 2016
    Member:
    #3172
    Messages:
    2,000
    Gender:
    Male
    First Name:
    Dave
    Northeast San Francisco Bay Area
    Vehicle:
    2016 Silver Sky Metallic Crewmax 5.7L TRD 4x4
    22x12”HostileRage/33”NittoRidgeGrap/StealthFighter/FOX-BDS
    I started my current set up at +20 with the 295/60/20's with some minor rubbing on the front liner and had to remove the flaps. Since I purchased fender flares I wanted to prevent the tucked in look, so I bought my Bora wheels spacers to take care of that. However in doing so I brought the cab mount into play. i think my next move is to do the chop and see if that will buy me enough room to go slightly bigger and wider on my next set of tires.
     
  28. Aug 30, 2017 at 9:07 AM
    #88
    r4z0r51o

    r4z0r51o have fallen off the forum, but I’m still alive.

    Joined:
    Apr 17, 2016
    Member:
    #3172
    Messages:
    2,000
    Gender:
    Male
    First Name:
    Dave
    Northeast San Francisco Bay Area
    Vehicle:
    2016 Silver Sky Metallic Crewmax 5.7L TRD 4x4
    22x12”HostileRage/33”NittoRidgeGrap/StealthFighter/FOX-BDS
    Is this code still valid? Doesn't seem to work ...

    Edit ... Okay, got the code to work (Just had to use a different non-outdated tablet). Order placed!
     
    Last edited: Aug 30, 2017
  29. Sep 1, 2017 at 11:18 AM
    #89
    dcsleeper408

    dcsleeper408 BASTRDS

    Joined:
    Nov 10, 2015
    Member:
    #2081
    Messages:
    4,946
    Gender:
    Male
    First Name:
    mark
    San Jose CA
    Vehicle:
    2015 TRD PRO
    Dave if you haven't ordered yet
    15% - code : Laborday
     
  30. Sep 1, 2017 at 1:03 PM
    #90
    r4z0r51o

    r4z0r51o have fallen off the forum, but I’m still alive.

    Joined:
    Apr 17, 2016
    Member:
    #3172
    Messages:
    2,000
    Gender:
    Male
    First Name:
    Dave
    Northeast San Francisco Bay Area
    Vehicle:
    2016 Silver Sky Metallic Crewmax 5.7L TRD 4x4
    22x12”HostileRage/33”NittoRidgeGrap/StealthFighter/FOX-BDS
    Thanks Mark, but order already placed. I'm okay with it, it's not like 15% would have saved me alot more than the 10% I got on a $25 order. Just happy that RF made a good quality product for us and hope it will provide enough clearance for my tires.
     
To Top