2” spacers

Hello members. I would love to have some extra $$$ floating around for some wheels but I do not, so Im saving. On the meantime I want to install some ricey 2” spacers. I have the oem 20” wheels with 275/55. Can someone please chime in and let me
know if the tires will rub with 2” spacers. Thanks for your input.

 

Subd

 

They will rub the front flap behind fogs.

 

Also make sure you use a hub centric spacer. Most people use Bora spacers.

 

Yes Bora is what I was thinking. Nothing less. They have been tested over and over. Thanks

 

Really...oh shoot. I was hoping for a “go ahead yr too far”... Thanks for your input.

 

I am running 33's on factory 20's with 2" Hub centric spacers. I had to remove the front flaps. otherwise no rubbing unless at full steer lock.

 

Spacers arrived and are installed. No rubbing at all!!!! Tires are 1 3/8” out. I am experiencing a little of steering wheel wobbling around 62 mph

 

Did you re tighten them after 5 miles. And I think they’re supposed to be torqued to wheel specs

 

Did you thread lock the spacer nuts?

 

What spacers did you end up going with?

 

Red thread lock...
The wobbling started since day one. All nuts were torqued to 100 ft/lbs.

 

Bora 2”

 

I have not. I installed them today and rode 20 miles. Have not retighten them. I will after 100 miles.

 

Might need your wheels re balanced

 

With spacers it wobbles. Without it does not

 

Tundras are very sensitive to spacers and certain wheels when it comes to vibrations.

 

Update...

I rotate them 180 deg and wobbling disappeared. Happy camper. I bought a second ised pair for the back. All good. Will retorque them soon.