Bolt in On Board Air Compressor Mount

Can you send me some info on the twin mount? Thanks much

 

Unfortunately, last he posted he's without the ability to manufacture them right now. It's an awesome fit and finish so it's worth it to wait, IMO.

@Bannock452 , I'm not trying to kill your side gig here so give us an update if anything's changed.

 

@Bannock452, I would like the twin set up. let me know when it's available. thx man

 

@Bannock452 I'm in for a dual if'n when you get going again. Will be looking for other alternatives in the mean time but hoping yours is the ticket!

 

You had me at ‘blow the sand off your sack.’

 

I still think it is an over kill.

 

Onboard is a luxury and one I now have, had it in my fj and after a trip in the NW I was the guy filling up 4 rigs who didnt have air with them weather bolted on or just a battery clamp. Ive helped 3 coworkers at work regain air. Its deff nice to have and glad I have it again this time with abbetter setup!

 

Quick question after reading all these posts. For the purposes of air up tires and inflatable mattresses, boats etc it the single version enough? I don't run tools off the truck and if I did I'd haul my compressor.

 

Yep. Single is good to go for airing up tires (and running the air locker if you have one). Mattresses should be ok too. Boats? Depending how big, you might hit the duty cycle limit and have to wait for it to cool down (50% on the single, 100% on the dual).

One thing to keep in mind though: how dusty do things get? I've liked having an air nozzle when exiting the trail to blow off my equipment, interior, myself, etc before heading home (usually a long road trip back). The dual is much better suited to blowing air for that purpose. FWIW.

 

Thanks. I'll probably be getting all my blowing done at home.

 

That sounded odd. ;-P

 

what compressor are you running? Im looking for something small and compact to run airhors...

 

@Bannock452 I'm in for a twin mount if you get going again.

 

PROTIP: talked to him recently and said hes not on here as much.

Solution: @tundra452 on IG, let him know whatsup, im sure the support will push him to make more soon.

 

maybe @Bannock452 should sell the design to a big company win-win. royalties and no need to invest.

 

Last post from him was Jan 6th, almost 2 months ago. I'm assuming that he's done making these.

 

Alright boys and gals, and anyone else looking for a mount setup, was out with new friends from the PNW and they got a new mount setup dialed in, I myself am running brandons version but untill he gets back on his feet etc I have to show support to local guys.

Ask for ron at Sharkbite and let him know you are interested in the mounts that I am talking about, very nice setup and clean as well. Yesterday he said he had 8 premade and I told him WE need something so looks like he jumped on it today haha.

Heres a pic of his from yesterday.
I believe they are around $125
(not sure if thats shipped)

https://www.sharkbitems.com/

 

@Matthewkort is this similar to yours? The site has no pictures.

 

It's the one @Bannock452 made

 

I I believe the photo is of sharkbite’s mount and not Brandon’s.

 

Yes very similar to mine, same bolting areas etc main difference is the front plate, sharkbite has more room to get in and bolt the back bolts as to mine was a BIT*h! but both sturdy!

Sharkbite: bottom pic

 

I need a mount for the single arb.

 

Look @ZPMAN post, has sweet set up too

 

Ok guys waiting for an update on these mounts for compressors. I sent an email to Sharkbite and this was their response. Pretty exciting if you want one of these.


Hi Frank! A few guys have reached out to me individually already. I had the truck brought in today so I can 1. Get pictures of the pre production model. 2. Get the needed measurements needed to make some slight modifications to provide a better finished product. We didn't expect this to be such an in demand product so we will be putting in some extra time in order to get these out as quickly as possible without sacrificing quality. The bracket is made of aluminum as opposed to steel and in our application fits a twin ARB on board air (

$750 ckmta12 ARB 12 volt twin air compressor and tire inflation kit with digital tire inflator - high performance 4X4

ckmta12). The brackets are priced at $120 each for the bracket alone or $75 if purchasing the compressor from us as well. (Plus shipping if being shipped out) I've attached the pictures of the pre production model that we had in our Tundra. Please feel free to reach out toe with any questions you might have.

Christopher Dominguez Sharkbite Motorsports 4255847274

 

How about the mount for the single arb?

 

Im assuming tey wont make another just for the smaller, BUT.. u can get it and just drill another set if holes to accomidate a single and also have a bit more realestate for a switchpros or some other sort of module etc.

Or I say message them and let them know single useres are out there as well! Its deff nice to have both options avail.

 

Mine is a single, I planned on using it

 

Yea gonna get one when it available.

 

Called them and have been added to the list when they become available. Supposed to be ready at the end of the week.

 

Was just on the phone with Christ right now to be on the list..