What Offset is best for me?

I will be upgrading my 2nd Gen Tundras tires in a couple of months and I was wondering what offset will work best for me. I’m going to buy 33”x12.5” tire with some 20x9 rims, I want a offset that will make my tire stick out around a inch, so any input would be great!

 

+25

 

this is +50mm offset. +25mm would stick out another inch:

 

Does it still look the same sticking out on the 2nd gen tundras?

 

I assume so? at least you can figure the difference between a +50 and +25.

also, my tires are about 33"x12".

 

I have 35x12.5 18x9 on a +12 wheel

 

Would you say yours stick out about an inch or so? A little hard to tell from the pics but it looks like it may be around an inch. I'm debating on going with a +12 wheel or not. Nice color truck!

 

Thanks and Yes right at an inch

 

I have 0 offset. Hangs out about 1-1.5

 

35x12.50’s on a +20 offset.



And a little bit further away.

 

Your gonna want a +20 offset then.

 

No Kidding

 

+18

 

yes, frustratingly hard

 

+0 has a tiny bit of poke if you run stock flares

 

0 offset

 

stupid question, but is there any way to achieve an off

thats the only thing keeping me from putting spacers on mine... any chips yet?

 

This is my fuel 20x9 +20 offset wheels on 33” tires. Sticks out around an inch or less from top of stock fender (no flares)

 

+ 18mm on my 12.5 x 35's

Sorry, didn't notice front wheels are turned slightly in the pics. Old eyes and small phone...

 

305/65-18 (33.6 x 12) on 18 x 9 +25mm offset. I went with this combination because I felt it was a good match; tire/rim ratio. I didn't want skinny/tall tires nor did I want short/wide tires. IMHO, this was the best balance for what I was going for. They fill the wheel well just enough without looking over stuffed. There is just enough wheel poke to give it a nice stance without being a "bro-dozer".

 

Here’s mine. Toyo AT2 35/12.50 fuels +20

 

This is a 20 x 10 x -19 with a 35 x12.50 x 20 tire.