Turn signal issue

Hey I have a 2017 sr5 tundra and have recently Installed new stock 2018 led headlights on them from headlight revolution,also recently I have installed auto start from 12 volt solutions which has worked fine for about 2 months now

To install the headlights you have to re pin the headlight turn signal connectors such as their video shows headlight turn signals work and flash correctly and auto start works correctly, but the issue I am now having is my a/c controls are permenantly illuminated and flash with the turn signal, has anyone has this happen before? Or anything similar, sorry for the long post any advice would be helpful

 

Check your grounds

 

Here's a gif of the issue

 

Unplug your front signals. If your ac lights go away you re pinned them wrong.

 

That actually worked BlueBottle controls did not illiminate with turn signal harness unplugged, that is my current pin set up only thing I changed was switching the black/white wire with the purple as per the instructions at mark 5:00 in this video
https://youtu.be/xPZbmI4QMQg
Any more pin combinations I can try? Only thing I can think of is switch pink and black and white, thanks again for all the help you guys have been pretty awesome

 

I don’t know. You should call whoever you got the harness from. All I know if you used @iHacker ‘s harness it would be plug and play.

 

Remove Violet wire completely cover the metal pin with tape and finally secure it to the stock harness, also is a good idea to seal the empty connector hole with silicone or a cavity plug to avoid water damage into the connections.


This should resolve your issue.

 

Thanks man I will definitely give that a shot tomorrow, much appreciated!

 

I have a 2014 Tundra and I also did this mod using the 2018 Tundra Pro black headlamps and I haven’t had this issue. Mine did have the DRL’s and I did have to repin/move the wires. I followed the video step by step. Did u order the extra DRL wire for $10. Wandering if u needed that like I did.

 

Yes i did also buy and install the additional DLR harness, also did the install from both that video I posted and the DLR harness install exactly step by step as well, which is why I thought it could possibly be be something crossing up with the auto start previously installed I called Headlight revolution yesterday they were supposed to call me back today but never did (go figure)

 

Nothing involving the remote start, trust me their instructions for the turn signal repining aren’t correct for SR5 trucks or any with Amber DRL, they are good with Platinum and 1794 trucks because this trucks don’t have that extra violet wire.

 

I have tried to call headlight revolution several times and they never answer and never call back. They seem to only communicate via email.

 

Thats what i had to do to mine as well no issues now

 

Hey I did what you said and removed the purple wire entirely worked great, thank you all so much for your help, was really awesome and saved me alot of time