1. Welcome to Tundras.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tundra discussion topics
    • Communicate privately with other Tundra owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Zone 5 inch lift questions

Discussion in 'Suspension' started by David P, Jun 4, 2016.

  1. Jun 4, 2016 at 6:41 AM
    #1
    David P

    David P [OP] New Member

    Joined:
    Mar 22, 2016
    Member:
    #2976
    Messages:
    27
    Gender:
    Male
    First Name:
    David
    Alabama
    Vehicle:
    2016 Toyota Tundra 4x4 CM Platinum
    BDS 7" lift with Fox coil overs and 2.5s in the rear, CB shackles w/ poly bushings, CB steering kit, CB poly rack bushings, Dakar rear leaf pack w/ CB poly bushings, Bushwacker paint to match fender flares,, Fab Fours premium bumpers font + rear, Fab Fours modular roof rack with lights all around, ARE Z series shell, BDS Traction control bars, Fuel Nutz 2 piece 22x10 wheels, Toyo MT 37X13.5, Spod overhead lighting control unit, Kenwood/JL Audio, Dynamat sound deadening throughout the cab, Morimoto 40" LED light bar hood bulge, Viper remote start alarm, Bully Dog tuner, S+B CAI, Retro'd HID Headlights, Morimoto 2-Stroke LED Fogs, Undercover tool boxes.
    The zone lift states their wheel and tire specs for the lift.

    Can someone explain to me why an 18 inch wheel would NOT work within the same offset and backspacing? Does anyone have experience with this lift and wheel and tire set up?


    The 18 only says 5.5" BS while the 20 is 5.5-5.625".

    Wheel Size: 18x9
    Back Spacing: 5.5″
    Max Tire Size: 35 x 12.50

    Wheel Size: 20x9
    Back Spacing: 5.5″ - 6.25″
    Max Tire Size: 35 x 12.50

    Thanks!
     
To Top