1. Welcome to Tundras.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tundra discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Tundra owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Replaced steering column/shifter

Discussion in '1st Gen Tundras (2000-2006)' started by TelbauM, Jun 11, 2016.

  1. Jun 11, 2016 at 9:29 PM
    #1
    TelbauM

    TelbauM [OP] New Member

    Joined:
    Jun 11, 2016
    Member:
    #3588
    Messages:
    1
    Gender:
    Male
    So I replaced my steering column since my shifter broke and I needed the upper,lower shrouds, shifter and steering wheel. I swapped ignition switches so I can use my door key for the ignition too. I put every thing back together and it won't start. I then ripped it apart and checked all connections and reassembled. Still nothing. I Disconnected my battery and reconnected had my
    Wife jump in to see if it was my starter. She turns the key and it starts up. I drove it all day starting it and parking, got home for the night and next day it won't start. I checked battery voltage and it's good. Checked ignition switch and its good. Sounds like solenoid is coming on and fuel pump too. Kinda boggled here. Any other suggestions?
     

Products Discussed in

To Top