Rear bearings

My 2016 tundra within 43 k has had rear bearing replaced 3 times. Has anyone had that problem? forgot to put in haul 25 foot trailer three times since last bearing change. Tires are factory. Do not go off road. Dealer now says axle problem. When new bearing was being installed mechanic noticed bearing not sitting right. This fixes the problem. Axle on order.






Thanks preacher for assistance in post

 

Something has to be severely out of spec for it to be going through wheel bearings every 14k miles. Is the dealership replacing them or a local mechanic/shop? Also post the mods done to your truck if any.

 

If they go out again get the old wheel bearings and take pictures so we can see wear patterns and get a better idea of what it could be, if you can get your hands on a set that has been replaced on your truck already that would be a great starting point. Check your rear end fluid too, it could have been overlooked more than once, although I hope not....

 

I see that this is your first post, here on Tundras.com. Welcome. But, you have not given us enough information to give you any substantial feedback. Are you running OEM wheels? The greater the negative offset of aftermarket wheels, the shorter the life of your wheel bearings. Have you driven through any floodwaters? That too, can cause reduced bearing life. Do you regularly carry a large amount of weight in the bed? That too, can reduce bearing life. There are several factors that can reduce the life of your bearings.

 

Welcome aboard from SoCal.