1. Welcome to Tundras.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tundra discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Tundra owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

OME (Old Man Emu) Coilovers Toytec 2.5-3.5 lift SOLD

Discussion in '1st Gen Tundra Parts Marketplace (2000-2006)' started by revtune, Oct 1, 2020.

Thread Status:
Not open for further replies.
  1. Oct 1, 2020 at 9:46 AM
    #1
    revtune

    revtune [OP] New Member

    Joined:
    Mar 5, 2019
    Member:
    #27132
    Messages:
    610
    Gender:
    Male
    First Name:
    Dane
    Houston Texas
    Vehicle:
    2006 Tundra 4.7 AC 2wd
    2006 Tundra: Stock air intake 3 inch catback Magnaflow 13742 2.5 inch front lift 1.5 inch rear blocks 2014 sr5 4Runner wheels (17x7) 1.5 inch hub centric wheel spacers p285/70/17 Nitto Terra Grappler G2 Weathertech floor liners
    OME (Old Man Emu) Coilovers

    Toyota Tundra 2000-2006

    Excellent condition

    Assembled coilovers, ready to install.


    These coilovers were purchased from Toytec and assembled by toytec in December 2017.


    I installed them on January 19, 2018, mileage was 125,955.

    I removed them on September 27, 2020, mileage was 131,869.

    Yes, I keep notes whenever I install new parts or have work done on my truck.

    I ran these on a 2002 access cab tundra 4.7. I measured from the center of the hub to bottom of the fender flare before taking them off. It measured 23.5, so that put the front around 3.5 inches. If installing these on a 4x4, you will most likely be around 3 inches. If installing them on a crew cab, you will probably be around 2.5 to 3 inches.

    Most stock tundras are about 20 or 20 1/2 inches in the front.

    Very low miles on these with zero off road use (I live in Houston).

    I’m selling them, because I’m giving my truck to my niece and she is not into lifted trucks. I put the stock coilovers back in it.

    The 33’s I was running are going on a different truck.

    These sell on toytec for around $625.00

    Shipping alone will probably be $80-100 for these things.

    I’m looking to get $500 (shipping included)

    If I can’t get something in that neighborhood, I will just keep them and use on a different project. Please post your questions here or PM me, I’ll be happy to answer them.


    75DE6A3A-B0AA-4A00-B828-07029AC95CC5.jpg

    05016280-3967-47D3-8302-E5969FF21643.jpg

    41E86869-223C-4456-86C1-C225943728AA.jpg

    C519BF7C-E49F-4008-80BA-F60FCC09FE9E.jpg
     
    Last edited: Oct 1, 2020
  2. Oct 2, 2020 at 6:43 PM
    #2
    revtune

    revtune [OP] New Member

    Joined:
    Mar 5, 2019
    Member:
    #27132
    Messages:
    610
    Gender:
    Male
    First Name:
    Dane
    Houston Texas
    Vehicle:
    2006 Tundra 4.7 AC 2wd
    2006 Tundra: Stock air intake 3 inch catback Magnaflow 13742 2.5 inch front lift 1.5 inch rear blocks 2014 sr5 4Runner wheels (17x7) 1.5 inch hub centric wheel spacers p285/70/17 Nitto Terra Grappler G2 Weathertech floor liners
    I sold these, How do I close this thread?
     
Thread Status:
Not open for further replies.
To Top