1. Welcome to Tundras.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tundra discussion topics
    • Communicate privately with other Tundra owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

NEW! 2007-2016 Crew Max and Double Cab bolt on Sliders from SDHQ

Discussion in 'SDHQ Offroad' started by sdhq_offroad, Jul 26, 2016.

  1. Jul 26, 2016 at 9:32 AM
    #1
    sdhq_offroad

    sdhq_offroad [OP] New Member Vendor

    Joined:
    Apr 29, 2016
    Member:
    #3253
    Messages:
    240
    GILBERT, AZ
    http://store.sdhqoffroad.com/2010tundrarocksliders.aspx

    SDHQ is proud to announce the release of our bolt on Rock Sliders for the 2007-2016 Toyota Tundra. These rock sliders have been built to fit both the Crew Max and Double Cab Short Bed trucks. Sticking to a well-earned reputation for craftsmanship, we chose to build these rock sliders out of 4130 chromoly tubing with gusseted steel mounting plates ensuring that these are both strong and light weight. These rock sliders were CAD designed and built in house for a precise fit and finish every time.

    Our rock sliders are intended to be a fully bolt-on design, so there is no cutting, welding or drilling required for install and there is no permanent frame modifications required. Our sliders utilize 4 mounting points on the frame per side and we also created a unique mounting design that attaches to the front body mount where the hardest initial impact tends to occur. Other sliders on the market tend to place the first mount nearly one foot behind the front body mount which creates a weak point in the front part of the slider.

    [​IMG]

    [​IMG]


    • Fits 2007-2016 Tundra Double Cab and Crew Max
    • Durable 4130 .120” wall chromoly tubing with gusseted steel mounting plates for durability
    • No cutting, drilling or welding is required forinstall.
    • No permanent modification to the frame is required
    • Unique mounting design made specifically for the Toyota Tundra
    • Just as strong as a weld-on slider
    • Works with body mount chops
    • CAD designed for a precise fit and finish
    • High strength grade 8 hardware included
    • Raw and powder coated finishes available
    • Made in America
    http://store.sdhqoffroad.com/2010tundrarocksliders.aspx
     
  2. Jul 26, 2016 at 9:34 AM
    #2
    Sean266

    Sean266 #ThinBlueLine Staff Member

    Joined:
    Jan 5, 2014
    Member:
    #6
    Messages:
    10,747
    Gender:
    Male
    Colorado
  3. Jul 26, 2016 at 9:40 AM
    #3
    sdhq_offroad

    sdhq_offroad [OP] New Member Vendor

    Joined:
    Apr 29, 2016
    Member:
    #3253
    Messages:
    240
    GILBERT, AZ
    More Pics on @TRON truck

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
    DeanO and TRON like this.
  4. Jul 26, 2016 at 9:43 AM
    #4
    TheBeast

    TheBeast Mr Line-X

    Joined:
    Apr 27, 2016
    Member:
    #3246
    Messages:
    1,074
    Gender:
    Male
    SoCal
    Vehicle:
    2012 CM 4x4 TRD
    they are on my list for sure. will they protect from door dings as well on the parking lot ? can they be used as a step too ?
     
  5. Jul 26, 2016 at 9:45 AM
    #5
    sdhq_offroad

    sdhq_offroad [OP] New Member Vendor

    Joined:
    Apr 29, 2016
    Member:
    #3253
    Messages:
    240
    GILBERT, AZ
    yes and yes, however I generally tell people that while a slider will work as a step it is not a substitute for a step as it does not sit low enough to really aid getting into or out of the truck. But you can stand on them to load things on the roof or whatever you need!
     
    TheBeast likes this.
  6. Jul 26, 2016 at 9:47 AM
    #6
    TheBeast

    TheBeast Mr Line-X

    Joined:
    Apr 27, 2016
    Member:
    #3246
    Messages:
    1,074
    Gender:
    Male
    SoCal
    Vehicle:
    2012 CM 4x4 TRD
    I need to take a road trip to Gilbert,AZ. Between the sliders and the bumper..:burnrubber:
     
    sdhq_offroad and Sean266 like this.
  7. Jul 27, 2016 at 2:11 PM
    #7
    sdhq_offroad

    sdhq_offroad [OP] New Member Vendor

    Joined:
    Apr 29, 2016
    Member:
    #3253
    Messages:
    240
    GILBERT, AZ

    [​IMG]
     
  8. Aug 14, 2016 at 8:48 PM
    #8
    Wrongside

    Wrongside Shiney side up at all times!

    Joined:
    May 25, 2016
    Member:
    #3447
    Messages:
    63
    Gender:
    Male
    Vehicle:
    2016 Tundra CM QS TRD Pro
    Toyo AT2 275/70 Tires, SDHQ Sliders, Linex all over da dang place...
    So, I had a set of these show up at my place last week. Gotta say, these things are awesome. Perfect fab work and welding. Great, low profile, lightweight design! These are definitely worth a look for anyone wanting sliders for their Tundra...

    The plan is to have them thoroughly coated and Linex the rails before install, but with the obvious attention to detail in these things, I expect they'll bolt right up. Vacation will get in the way, so it may be a while before I get pics up. But put them up I shall!

    One last thing- I've been researching and shopping for Sliders since the day I picked up my 2016. Before SDHQ came out with these ones, I even tried to purchase a set from other companies, but when the vendors find out we're north of the 49th, they'd brush me off. Not return calls or emails. Not the case at all with SDHQ and Cliff... I can't say enough good things about you guy's patience and customer service. Thanks for all your help and, oh yeah, your product is unreal awesome too! Thanks again Cliff!
     
    sdhq_offroad, Sean266 and MotoTundra like this.
  9. Aug 14, 2016 at 10:12 PM
    #9
    ColoradoTJ

    ColoradoTJ Calm your tits

    Joined:
    Feb 24, 2016
    Member:
    #2766
    Messages:
    2,693
    Gender:
    Male
    First Name:
    Chris
    Colorado Springs, CO
    Vehicle:
    2016 GMC 3500
    Sweet.

    How much do the DC and CM set weigh?

    I like the design with not welding to the frame like some of the other guys.

    Nice work.
     
  10. Aug 15, 2016 at 5:16 PM
    #10
    sdhq_offroad

    sdhq_offroad [OP] New Member Vendor

    Joined:
    Apr 29, 2016
    Member:
    #3253
    Messages:
    240
    GILBERT, AZ
    No Problem buddy! Glad they made it up there as quickly as they did. Send me over some pics when you get them on

    They're right around 100lbs a set, 100% bolt on.
     
    Wrongside and ColoradoTJ like this.
  11. Aug 15, 2016 at 5:17 PM
    #11
    ColoradoTJ

    ColoradoTJ Calm your tits

    Joined:
    Feb 24, 2016
    Member:
    #2766
    Messages:
    2,693
    Gender:
    Male
    First Name:
    Chris
    Colorado Springs, CO
    Vehicle:
    2016 GMC 3500
    Hell that is pretty good!!! I had some from a different vendor on my taco and they were HEAVY....
     
  12. Aug 16, 2016 at 9:38 AM
    #12
    TheBeast

    TheBeast Mr Line-X

    Joined:
    Apr 27, 2016
    Member:
    #3246
    Messages:
    1,074
    Gender:
    Male
    SoCal
    Vehicle:
    2012 CM 4x4 TRD
    I need a set !..so many projects...:burnrubber:
     
  13. Aug 16, 2016 at 10:55 AM
    #13
    too tall

    too tall New Member

    Joined:
    May 19, 2016
    Member:
    #3404
    Messages:
    114
    These are looking good. I'll contact SDHQ about getting a set.
     
  14. Aug 16, 2016 at 5:53 PM
    #14
    too tall

    too tall New Member

    Joined:
    May 19, 2016
    Member:
    #3404
    Messages:
    114
    Ordered! I'll report back after install.

    They arrive bare. Opinions on POR15 coating than POR topcoat?

    I could also have the same guy who did the spray in bed liner shoot the bars.
     
    Last edited: Aug 16, 2016
  15. Aug 16, 2016 at 7:44 PM
    #15
    gosolo

    gosolo If you go solo you better go prepared

    Joined:
    Nov 5, 2015
    Member:
    #2064
    Messages:
    316
    Gender:
    Male
    Central AZ
    Vehicle:
    2015 DC Super White Pro
    2"CB shackles, bushings and 1 shim, lockerdown console vault, rear folding seat back mod, snugtop shell with opening side windows, stubby antenna, husky floor mats, seat covers and got rid of the interior chrome
    Discount for Tundra Talk members?
     
  16. Aug 17, 2016 at 9:44 AM
    #16
    sdhq_offroad

    sdhq_offroad [OP] New Member Vendor

    Joined:
    Apr 29, 2016
    Member:
    #3253
    Messages:
    240
    GILBERT, AZ
    well this is tundras.com :p but we are running a special for forum members right now which is $50 off our normal pricing.

    We also just finished a large production run of these as well and I do have a set pre-powdercoated for local install or pickup available
     
    gosolo likes this.
  17. Aug 17, 2016 at 11:55 AM
    #17
    PLC721

    PLC721 New Member

    Joined:
    Aug 26, 2015
    Member:
    #1714
    Messages:
    180
    Gender:
    Male
    First Name:
    Patrick
    Chandler, AZ
    Vehicle:
    2015 Double Cab SR5
    Kings, BFG's and Methods
    Checked these out about 2 weeks ago, talk about strong and beefy!!!
     
    sdhq_offroad likes this.
  18. Aug 17, 2016 at 6:51 PM
    #18
    gosolo

    gosolo If you go solo you better go prepared

    Joined:
    Nov 5, 2015
    Member:
    #2064
    Messages:
    316
    Gender:
    Male
    Central AZ
    Vehicle:
    2015 DC Super White Pro
    2"CB shackles, bushings and 1 shim, lockerdown console vault, rear folding seat back mod, snugtop shell with opening side windows, stubby antenna, husky floor mats, seat covers and got rid of the interior chrome
    I will stop in tomorrow and check em out. Do you think I can jack up the side of the truck with them? 4 brackets/bar? 2 bolts/bracket?

    Already got a bad dent in the rocker under the passenger door on the drivers side
     
  19. Aug 19, 2016 at 4:13 AM
    #19
    too tall

    too tall New Member

    Joined:
    May 19, 2016
    Member:
    #3404
    Messages:
    114
    What's the word Gosolo?. I am waiting for tracking info.
     
  20. Aug 19, 2016 at 6:15 AM
    #20
    TRON

    TRON The Game Has Changed

    Joined:
    Jan 8, 2016
    Member:
    #2398
    Messages:
    194
    Gender:
    Male
    First Name:
    Stefen
    Tucson, Arizona
    Vehicle:
    2016 TRD Pro Tundra CM FFV
    R.I.P. Rinzler 1/2/2016
    Don't hesitate buying the BEST bolt on slider money can buy gentlemen! I had the privilege of rocking the first set and wasted no time at all putting them to use in Moab! :thumbsup: I can guarantee they will support the entire weight of the truck with little to no flex whatsoever. I've used my hi-lift on them with no issue. Looking underneath to see how they're mounted is pretty impressive especially around the cab mount!
    [​IMG]
    [​IMG]
    [​IMG]
     
    Ardnut, MotoTundra, DeanO and 4 others like this.
  21. Aug 19, 2016 at 5:13 PM
    #21
    gosolo

    gosolo If you go solo you better go prepared

    Joined:
    Nov 5, 2015
    Member:
    #2064
    Messages:
    316
    Gender:
    Male
    Central AZ
    Vehicle:
    2015 DC Super White Pro
    2"CB shackles, bushings and 1 shim, lockerdown console vault, rear folding seat back mod, snugtop shell with opening side windows, stubby antenna, husky floor mats, seat covers and got rid of the interior chrome
    Picked em up yesterday, got home today early enough to install the one on the drivers side. Will do the other one in the morning. Time for some scotch now!
     
    TheBeast and sdhq_offroad like this.
  22. Aug 19, 2016 at 5:46 PM
    #22
    too tall

    too tall New Member

    Joined:
    May 19, 2016
    Member:
    #3404
    Messages:
    114
    You dog ;) I'm chomping at the bit. Mine are due here mid-week but first a trip to my line-X guy.
     
  23. Aug 19, 2016 at 6:11 PM
    #23
    gosolo

    gosolo If you go solo you better go prepared

    Joined:
    Nov 5, 2015
    Member:
    #2064
    Messages:
    316
    Gender:
    Male
    Central AZ
    Vehicle:
    2015 DC Super White Pro
    2"CB shackles, bushings and 1 shim, lockerdown console vault, rear folding seat back mod, snugtop shell with opening side windows, stubby antenna, husky floor mats, seat covers and got rid of the interior chrome
    You will be pleased. What truck do you have?
     
  24. Aug 19, 2016 at 6:24 PM
    #24
    too tall

    too tall New Member

    Joined:
    May 19, 2016
    Member:
    #3404
    Messages:
    114
    2016 TRD Limited Dbl. Cab Other than the White Knuckle Sliders these are the only ones that really caught my attention from a design and fabrication viewpoint. Proof is in the doing but I take your word for it. People here don't mess around when it comes to our trucks ;)
     
  25. Aug 19, 2016 at 6:32 PM
    #25
    gosolo

    gosolo If you go solo you better go prepared

    Joined:
    Nov 5, 2015
    Member:
    #2064
    Messages:
    316
    Gender:
    Male
    Central AZ
    Vehicle:
    2015 DC Super White Pro
    2"CB shackles, bushings and 1 shim, lockerdown console vault, rear folding seat back mod, snugtop shell with opening side windows, stubby antenna, husky floor mats, seat covers and got rid of the interior chrome
    I checked out the white knuckle also. Have read some horror stories about difficult installation
     
  26. Aug 20, 2016 at 12:41 PM
    #26
    too tall

    too tall New Member

    Joined:
    May 19, 2016
    Member:
    #3404
    Messages:
    114
    No lift and no help here. No surprises is important.
     
  27. Aug 24, 2016 at 2:34 PM
    #27
    too tall

    too tall New Member

    Joined:
    May 19, 2016
    Member:
    #3404
    Messages:
    114
    Big truck arrived. I know good fabrication, this is that. They looks good. It will be a couple weeks. I've got racing in the NE to wrap up than off to get them coated.
    Enjoy the pics. FWIIW if these fit and function as good as they look these guys raised the bar some.
    Kudos for spraying them with a light oil prior to shipping. Appreciated.

    tk1.jpg
    tk5.jpg
    tk2.jpg
    tk4.jpg
    tk3.jpg
     
  28. Aug 31, 2016 at 1:57 PM
    #28
    sdhq_offroad

    sdhq_offroad [OP] New Member Vendor

    Joined:
    Apr 29, 2016
    Member:
    #3253
    Messages:
    240
    GILBERT, AZ
    Bump!
     
    MotoTundra likes this.
  29. Aug 31, 2016 at 2:11 PM
    #29
    too tall

    too tall New Member

    Joined:
    May 19, 2016
    Member:
    #3404
    Messages:
    114
    Ahhh, just back from the NE. I should have mine line-x by next week than install.
     
  30. Sep 1, 2016 at 4:54 PM
    #30
    Wrongside

    Wrongside Shiney side up at all times!

    Joined:
    May 25, 2016
    Member:
    #3447
    Messages:
    63
    Gender:
    Male
    Vehicle:
    2016 Tundra CM QS TRD Pro
    Toyo AT2 275/70 Tires, SDHQ Sliders, Linex all over da dang place...
    Mine are Linex'd! Just gotta find time between work and hunting to pick them up and install them. Heh.
     
To Top