Need help

Replaced interior lights with LED all was well till I Got to foot well light , took out lamp and had to mess with it to get LED to fit, looked up and sometime in the process lost all interior I just replaced, changed every 7.5 amp fuse under the hood no good 2021 tundra

 

Did you look in the fuse box under the dash? It's on the drivers side.

 

Got my head all twisted up in there and all I see is a small fuse block full , I think about 5 fuses all 30 amp

 

I think there's a little diagram on the fuse door that tells you what goes to what but I haven't looked. Here's a thread that my help you out: https://www.tundras.com/threads/help-interior-lights-not-coming-on.37669/

 

Look at the diagram. I popped a 15 or 7.5 in the cab for my tail light LEDs.

 

Nothing on fuse box under hood says dome, like I said replaced all 7.5 anyway, under dash behind parking brake small fuse block with all 30 amp fuses don't know what to do now

 

So you lost all the lights messing with the footwell light, did that one work when you got it plugged in correctly, or is that one dead as well?

 

All still dead

 

It might sound like a stupid question, but did you check the 3/way interior light switch to make sure you didn't accidently bump them off while working down in that area?, its happened before.

 

Just to confirm, you’ve replaced this fuse under the hood? I’ve had the same problem with my interior lighting after installing LED footwell lights. Every time they’ve gone out, this fuse was the culprit.

 

I was hoping i did just bump switch, but not it. I have nothing on my fuse box under the hood that says DOME but I did replace every 7.5 amp fuse in there, I think there's 4

 

That's a bummer. The only other thing I can think of is that there is a setting in your H/U to set the timing in seconds for the interior lights to turn off which also includes a completely off setting. Maybe a long shot, but I would check that for sure. Good luck.