1. Welcome to Tundras.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tundra discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Tundra owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Looking at buying Used 2006 Tundra

Discussion in '1st Gen Tundras (2000-2006)' started by tdrich7, Apr 11, 2021.

  1. Apr 11, 2021 at 3:34 PM
    #1
    tdrich7

    tdrich7 [OP] New Member

    Joined:
    Apr 11, 2021
    Member:
    #61659
    Messages:
    84
    Vehicle:
    2006 Tundra DC 4wd SR5
    Hey all - hope you can lend me words of wisdom here. I'm looking at buying a used Toyota Tundra, and my eye has been going towards the 1st gens. I don't have 30k+ to put into a truck at the moment, and I honestly like the idea of an older truck that doesn't have all the fancy electronics of modern cars. I may just be paranoid as I've had too many electronics issues with a Subaru, but that's how it goes.

    Anyways - any issues to look out for the 2006 version? I like that it's the oldest year of the generation - in theory it seems they should have had plenty of time to hammer out all the kinks. Am I misguided looking for a lower mileage 1st gen (this one has 113k miles - priced a little over KBB but comes with a matching cap and is a single owner that appears to have been very well maintained)? Any distinct advantages of the 2nd gen? I know the 1st gens and even later had some issues with the frame recalls, but 2006 doesn't appear to have been affected from what I've seen?

    Appreciate any and all help, cheers.
     
  2. Apr 11, 2021 at 3:52 PM
    #2
    speedtre

    speedtre New Member

    Joined:
    Jan 20, 2019
    Member:
    #24808
    Messages:
    1,696
    Inland Northwest
    Vehicle:
    2006 BSM Toyota Tundra DC TRD 4x4
    Rust rust rust....particularly the frame....if the frame is in good condition, then everything else is just typical maintenance wear and tear. These trucks don't really have any mechanical weaknesses if taken care of... The closest thing to a weakness is the secondary air injection system...which is not that expensive to bypass. Good luck with your search....that one you mentioned sounds like a nice candidate...
     
  3. Apr 11, 2021 at 4:03 PM
    #3
    sflips

    sflips New Member

    Joined:
    Jan 2, 2019
    Member:
    #23839
    Messages:
    89
    Gender:
    Male
    Middle Tn.
    Vehicle:
    2006 DC XSP
    I have an 06 and love it. You know to check the frame, Timing belt recommended at 90,000. If it hasn't been done, do it. I thru some lower ball joints on mine. just to be safe. 05 and 06 can have problems with the secondary air injection system (mine did) it will throw a check engine lite. Easy fix, just get a Hewitt Tech Inc. bypass kit, easy install. You might get lucky and have the limited slip diff on yours. Turning radius sucks on our trucks. Gas mileage sucks and remember they are not a 3/4 ton work truck. They are a light duty 1/2 ton.

    That's about it
     
  4. Apr 11, 2021 at 4:05 PM
    #4
    jimf909

    jimf909 Battery almost dead...

    Joined:
    Jan 18, 2021
    Member:
    #57786
    Messages:
    368
    Gender:
    Male
    First Name:
    Jim
    Washington or Idaho
    Vehicle:
    '03 Tundra SR5 AC 4.7 TRD w/LSD
    Dead stock with oem 16" starfish wheels. We'll see how long that lasts. :) Topper of unknown origin.
    A single owner, 113K mile '06 Tundra sounds like an outstanding starting point. Extra points if they've largely left it stock. Triple extra points if they've changed the timing belt (due at 90K miles) which means they probably maintained it fairly well. That's the kind of truck that sells for $15K - $20K on BaT.
     
  5. Apr 11, 2021 at 4:12 PM
    #5
    tdrich7

    tdrich7 [OP] New Member

    Joined:
    Apr 11, 2021
    Member:
    #61659
    Messages:
    84
    Vehicle:
    2006 Tundra DC 4wd SR5
    They've installed a 2 inch lift, I'll have to ask about the timing belt. Asking 14.5k currently. Said frame was cleaned up and coated with the recall. Posted pictures and it looks to be in good shape.
     
  6. Apr 11, 2021 at 5:04 PM
    #6
    Rotaryphoneuser

    Rotaryphoneuser New Member

    Joined:
    Apr 16, 2020
    Member:
    #45102
    Messages:
    258
    Gender:
    Male
    Ontario. Canada
    Vehicle:
    2018 Cement CrewMax
    Toyota used rubberized coating on the frame. Usually right over the existing rust. Not good.
     
  7. Apr 11, 2021 at 5:16 PM
    #7
    speedtre

    speedtre New Member

    Joined:
    Jan 20, 2019
    Member:
    #24808
    Messages:
    1,696
    Inland Northwest
    Vehicle:
    2006 BSM Toyota Tundra DC TRD 4x4
    You need to inspect the frame carefully and hit with a hammer every 2 inches to check for solidness.. Pictures are not good enough. It may still be a good buy, but a thorough inspection is required. Good Luck.
     
    FirstGenVol and jimf909[QUOTED] like this.
  8. Apr 11, 2021 at 5:16 PM
    #8
    tdrich7

    tdrich7 [OP] New Member

    Joined:
    Apr 11, 2021
    Member:
    #61659
    Messages:
    84
    Vehicle:
    2006 Tundra DC 4wd SR5
    Here's the photos provided. I suppose there's no way of knowing for sure under the coating but it looks to be in fairly decent shape to my eye? This is a Northeast truck however.

    169148324_1797246747127734_3464990086212059267_n.jpg
    170948989_1797246740461068_2212019473133882969_n.jpg
    170956795_1797246743794401_8310099570042123470_n.jpg
    170960981_1797246770461065_6214156610451953168_n.jpg
    171121030_1797246733794402_3200234125238328799_n.jpg
     
  9. Apr 11, 2021 at 5:17 PM
    #9
    tdrich7

    tdrich7 [OP] New Member

    Joined:
    Apr 11, 2021
    Member:
    #61659
    Messages:
    84
    Vehicle:
    2006 Tundra DC 4wd SR5
    Duly noted, thanks.
     
  10. Apr 11, 2021 at 5:22 PM
    #10
    GODZILLA

    GODZILLA Hail to the King, Baby.

    Joined:
    Sep 2, 2019
    Member:
    #35514
    Messages:
    27,086
    Gender:
    Male
    First Name:
    Adam
    Wyoming
    Vehicle:
    2023 Solar Octane TRD Pro TACOMA, 2022 Honda CB500X
    Trying not to mod it
    This pic would worry me.

    The red circles are all indicators of the level of or lack of protection for the environment it's in. The blue circle looks like there might be scaling under the coating. Like @speedtre said, a thorough inspection is going to tell you more than pics.

    upload_2021-4-11_18-22-32.jpg
     
    tdrich7[OP] and speedtre like this.
  11. Apr 11, 2021 at 5:47 PM
    #11
    tdrich7

    tdrich7 [OP] New Member

    Joined:
    Apr 11, 2021
    Member:
    #61659
    Messages:
    84
    Vehicle:
    2006 Tundra DC 4wd SR5
    Is a best bet for one of these finding one that has had the frame replacement done, particularly if I'm stuck looking in the rust belt?
     
  12. Apr 11, 2021 at 5:56 PM
    #12
    terrward

    terrward New Member

    Joined:
    Mar 13, 2021
    Member:
    #60355
    Messages:
    75
    Vehicle:
    2004 DC SR5
    Replaced frame > coated frame. If I had $15,000 to blow on a truck I would find one with a new frame, low miles.

    My 2004 had that rubberized coating sprayed on it during the service campaign, I can see some of it flaking off and rust underneath. I’ve coated most of what I could with fluid film. For the $3200 bucks I bought it for, I don’t mind wrenching on it.
     
  13. Apr 11, 2021 at 5:59 PM
    #13
    speedtre

    speedtre New Member

    Joined:
    Jan 20, 2019
    Member:
    #24808
    Messages:
    1,696
    Inland Northwest
    Vehicle:
    2006 BSM Toyota Tundra DC TRD 4x4
    It's hard to say. I drove 1500 miles round trip in 36 hours to trade in my 2017 Tacoma on a 2005 Tundra that had had the frame replaced at a Toyota dealer in PA. When I got there, it was apparent that the Toyota dealer took close up pics of the frame that had been replaced and looked good (the body and interior were PERFECT in pics and person) but the rest of the undercarriage and engine bay were a rusty mess...I turned around and drove home after 10 minutes and found another one. I learned a hard lesson that day.
     
    Last edited: Apr 12, 2021
    KarmaKannon likes this.
  14. Apr 11, 2021 at 6:12 PM
    #14
    sflips

    sflips New Member

    Joined:
    Jan 2, 2019
    Member:
    #23839
    Messages:
    89
    Gender:
    Male
    Middle Tn.
    Vehicle:
    2006 DC XSP
    Sorry, but as good as the 1st gen tundra is, I would "never" buy one from the rust belt. The Toyota frame and undercarriage can't endure that abuse. I would take a long drive and find one
     
    Lil Steve likes this.
  15. Apr 11, 2021 at 6:15 PM
    #15
    tdrich7

    tdrich7 [OP] New Member

    Joined:
    Apr 11, 2021
    Member:
    #61659
    Messages:
    84
    Vehicle:
    2006 Tundra DC 4wd SR5
    Yeah that's where my mind is starting to go. I have family in NC, so might have to look exclusively there and hoping something pops up. Only problem is it will be hard to jump on anything.
     
    speedtre likes this.
  16. Apr 11, 2021 at 6:20 PM
    #16
    FirstGenVol

    FirstGenVol Brake Czar

    Joined:
    Dec 13, 2018
    Member:
    #22934
    Messages:
    12,912
    East TN
    Vehicle:
    2002 AC
    That would be better, but still inspect a NC truck thoroughly. I test drove an 06 in January for another member that lives in VT. I'm in TN. The truck had a shit load of issues including the frame being crusty in places.

    The bottom line is that rust kills these trucks. Bring a flashlight and a hammer and go over it thoroughly. Good luck
     

Products Discussed in

To Top