FN FX PRO Wheels

I recently picked up new FN Fx Pro wheels from Dustin over at FN wheels. Which included the lug nuts and the blank black center caps. Dustin was well spoken and answered my questions thoroughly. His knowledge, communication and care in packing is definitely a 10 out of 10. He went out of his way to meet up with me on a Saturday near Anaheim. His warehouse is located in Corona. He also opened the boxes for me to inspect the wheels. The wheels are packaged in their own, individual box. A layer of soft foam is placed over the face of the wheel. They are also fitted with a bonnet and hard plastic rim edge protector to secure the foam sheet and to prevent scratches and damages. I wouldn't hesitate to buy another set of wheels from him in the future. For those of you on the fence on choosing wheels, this is your guy/company to purchase from. Give him a ring or shoot him an email. You won't regret it. These are not on their website....so just call or send Dustin an email.
Tons of people on Tacomaworld have bought from him. Link here.
More packaging/shipping info with pictures here.
Available color options I'm aware of are Matte black and Matte gunmetal

Now on to the wheel details.

FN Wheels FX Pro wheels have the following specs:

Flow-Formed
Diameter: 18"
Width: 9"
Offset: +25
Backspacing: 6"
Hub Bore: 110.2
Wheel Weight: 26.23lbs



















Center Caps
The caps that come with the wheels are flat and match the color of the wheels.
The OEM TRD caps with part # PTR18-35092 fit. This is the alloy background cap with red TRD logo.

FN: Center Cap Stickers
OEM TRD caps: OEM TRD Center Cap decals

Please note the wheels must be removed in order to remove the center cap and rear retention ring.







Spline Drive Lug Nuts



Thanks for reading. I did my best on the layout. I hope it wasn't to jumbled.
Enjoy!







Dustin's contact listed below

Dustin
FN Wheels
fnwheels@gmail.com
(855)WHEEL-00 (943-3500) - Toll Free in the U.S. and Canada
(951)735-1100 - Office (Local/International)

 

Trying to edit photos now

 

Look real nice show pics once installed

 

I should have photos of these mounted tomorrow!

 

Curious to see what these look like on a tundra. I had a set of bfd wheels I picked up from him for my Tacoma. Really good product.

 

Still not sure what caps to go with. I have stickers coming tomorrow. Will try some out. Worst case I can just swap them around every now and then .

 

The black come with what decal?

 

The black caps are just blank. I have some red vinyl trd letters coming for them. Also have some black vinyl lettering to cover the OEM trd caps.

 

I ordered the TRD for my black rhino wheels they are from Etsy the seem to be the only ones that can send them it sais they come from Spain. The problem is that in 6 months I've had to replace all four stickers and now they are coming off again they look real nice but what I realized the problem is that the heat is what makes them come off so now I dont know where else to get them from because no body else makes them due to it being illegal I guess

 

Yea I'm not sure how well this vinyl will hold up. I've considered having the OEM TRD caps painted. I did look at those TRD resin stickers you have but they don't seem to make them in a 4in. I'll see how the vinyl holds up for now.
A member on tacomaworld made these for another member. I may reach out to him as well. I've purchased bedside decals from him in the past. Really like this design.

 

I will ask a body shop that I send vehicles to and see if they can do the TRD in paint and see how it would come out

 

Where did you get the lug nuts from?

 

The lug nuts came with the wheels. I believe they are McGard lugs

 

Cool. Thanks

 

Too many teaser pics, lol.

Someone put some 295 70 18s on a set.

 

Dustin is the man! I have these wheels on my GX470, I didn't realize he had them in Tundra specs now. I just used his center caps and put simple TRD stickers on them and think it looks good. Please put some beefy tires on them and post pics when they are on the Tundra!

 

Working on it.

 

Where did you get the TRD stickers? They look good!

 

I’m 95% sure these will be the rims I use, timing is awesome too. I really liked the ones I had on my taco.

They really held up well to the salt in Wisconsin. Most of the other rims like the Methods NV’s I’m looking at have the bolts along the outside that will collect shit. Which has me concerned.

Ray 10’s on that list too.

I wish they made a 18” without that, they do make the 17” MR313.

We’ll see.

 

I'll be at the tire shop this afternoon. The tires that'll be putting on are Cooper ST Maxx 295/70r18. Will post pictures ASAP

 

Shit yeah, those are the same tires too.

 

Subscribed for the pics!

 

I got them off ebay. They have been on for 3+ years now with no issues. I forget the exact size I ordered off hand but this listing has several sizes to choose from if you measure the cap diameter.

https://www.ebay.com/itm/6xTRD-Viny...r-Wheel-replacement-Single-Color/283458464759

 

Thank you!

 

Not sure how I feel about these decals.
The sizing seems a little off. Going to give them a shot though

 

Not to bad. It was just hard to line then up along the lip. The wet method worked pretty well. If you decide to do this just take your time. I hope they hold up to the elements!

 

At the shop now! These guys better not scratch them. Going to raise hell if they do! They said about an hour or two.

 

Cant wait to see them on the truck!