1. Welcome to Tundras.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tundra discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Tundra owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Custom switches what to get?

Discussion in '3rd Gen Tundras (2014+)' started by phogallen, Feb 5, 2019.

  1. Feb 11, 2019 at 9:51 AM
    #31
    phogallen

    phogallen [OP] My Last Mid-Life Crisis

    Joined:
    Nov 24, 2018
    Member:
    #22111
    Messages:
    713
    Gender:
    Male
    First Name:
    Dan
    Kansas
    Vehicle:
    2019 Black 1794 Fusion Edition
    TRD Pro Grill, front bumper end caps, mirror caps and door handles blacked out. ATC Cap, Cap Pack 6 Gun Drawer, LED lights in CAP, Rhino rails on top, 12 volt accessory plugs. Weathertech floor mats, after market antenae. 45 Ceramic tint film to driver and passenger door. Coachbuilder shims ,+2 shackles, steering kit, bumper shims, Bora 1.25 wheel spacers Bilstein 5100's on mid setting. BW flares with blacked out Route 66 screws. Gloss black powder coated OEM rims and Cooper 295/70/18 Cooper ST MAXX. Tech12Volt sound system upgrade...JL C2's doors and C1's on dash, 5 channel JL amp, 2 10inch subs in custom box and DSR1 sound processor...Soundskins in doors and back wall. Trunk and body badges removed. Powder coated tow hooks red. Linex bed lining front bra film and flares along with full ceramic coat. Ceramic Pro interior plus windshield treatment. Toyota running boards and TRD anti sway bars in front and rear along with blacked out exhaust tip. TRD door latch cover plates. Full VLED light upgrade puddle, license, interior added footwell plus rear tail light brake, reverse. Added ASM turn signal LED's in front. OPT 7 tailgate light in red. Baja Design amber squadrons wc in front and SR2 Pro's in amber on rear bumper. Filmed reverse light in back, added red shackle on tow hitch and new license plate in front. Custom painted badge on tailgate. 3M crystalline on windshield and sunroof. Ceramic window film on rear seat windows. Added dirty deeds 8 inch stainless and summit racing dual tip. Soundproofed floor with foam and mass loaded vinyl. Black Bedslide added to bed.
    Or the configurable touch screen if I could figure out a way to flush mount it...that bracket is a non starter.
     
  2. Feb 12, 2019 at 9:03 AM
    #32
    phogallen

    phogallen [OP] My Last Mid-Life Crisis

    Joined:
    Nov 24, 2018
    Member:
    #22111
    Messages:
    713
    Gender:
    Male
    First Name:
    Dan
    Kansas
    Vehicle:
    2019 Black 1794 Fusion Edition
    TRD Pro Grill, front bumper end caps, mirror caps and door handles blacked out. ATC Cap, Cap Pack 6 Gun Drawer, LED lights in CAP, Rhino rails on top, 12 volt accessory plugs. Weathertech floor mats, after market antenae. 45 Ceramic tint film to driver and passenger door. Coachbuilder shims ,+2 shackles, steering kit, bumper shims, Bora 1.25 wheel spacers Bilstein 5100's on mid setting. BW flares with blacked out Route 66 screws. Gloss black powder coated OEM rims and Cooper 295/70/18 Cooper ST MAXX. Tech12Volt sound system upgrade...JL C2's doors and C1's on dash, 5 channel JL amp, 2 10inch subs in custom box and DSR1 sound processor...Soundskins in doors and back wall. Trunk and body badges removed. Powder coated tow hooks red. Linex bed lining front bra film and flares along with full ceramic coat. Ceramic Pro interior plus windshield treatment. Toyota running boards and TRD anti sway bars in front and rear along with blacked out exhaust tip. TRD door latch cover plates. Full VLED light upgrade puddle, license, interior added footwell plus rear tail light brake, reverse. Added ASM turn signal LED's in front. OPT 7 tailgate light in red. Baja Design amber squadrons wc in front and SR2 Pro's in amber on rear bumper. Filmed reverse light in back, added red shackle on tow hitch and new license plate in front. Custom painted badge on tailgate. 3M crystalline on windshield and sunroof. Ceramic window film on rear seat windows. Added dirty deeds 8 inch stainless and summit racing dual tip. Soundproofed floor with foam and mass loaded vinyl. Black Bedslide added to bed.
    Has anyone figured out a flush mount for the configurable Spod touch screen panel?
     
  3. Feb 12, 2019 at 10:33 AM
    #33
    matictundra

    matictundra New Member

    Joined:
    Jul 20, 2017
    Member:
    #8654
    Messages:
    248
    Gender:
    Male
    First Name:
    Franco
    AZ
    Vehicle:
    2017 Red Tundra SR5 4x4 CM
    Leveling Lift 3"/1.5" (6112 with a CB shim and JBA UCA, and 5160 and Toytec Shackles Nitto Terra Grappler G2 295/60R20 on Blk Fuel Vector Front and Rear TRD Sway Bars Amp Power Step EVO-One Remote Start Black Powder Coated Bumper Caps Colored Matched Front Bulge and TRD Pro Grill Assy RCI skid plate LED interior lights. Added front and rear footwell led lights. Blue LED lit lock/window switch. Black TRD shift knob Toyota Cargo LED Spyder Headlights (LED Hikari Bulb + Re-wired LED bar as DRL) Limo Tint (all around) Relocated Rear Diff Breather Rear Brake Line Extension Debadged
    I making my own for switch pro SW-9100that will go onto the overhead center console.

    EB66BA5D-4136-43AF-8291-05DC2D02528F.jpg
    D973D5DF-BEF1-4826-A1C5-16F6FBC9DC68.jpg
     
  4. Feb 12, 2019 at 7:02 PM
    #34
    phogallen

    phogallen [OP] My Last Mid-Life Crisis

    Joined:
    Nov 24, 2018
    Member:
    #22111
    Messages:
    713
    Gender:
    Male
    First Name:
    Dan
    Kansas
    Vehicle:
    2019 Black 1794 Fusion Edition
    TRD Pro Grill, front bumper end caps, mirror caps and door handles blacked out. ATC Cap, Cap Pack 6 Gun Drawer, LED lights in CAP, Rhino rails on top, 12 volt accessory plugs. Weathertech floor mats, after market antenae. 45 Ceramic tint film to driver and passenger door. Coachbuilder shims ,+2 shackles, steering kit, bumper shims, Bora 1.25 wheel spacers Bilstein 5100's on mid setting. BW flares with blacked out Route 66 screws. Gloss black powder coated OEM rims and Cooper 295/70/18 Cooper ST MAXX. Tech12Volt sound system upgrade...JL C2's doors and C1's on dash, 5 channel JL amp, 2 10inch subs in custom box and DSR1 sound processor...Soundskins in doors and back wall. Trunk and body badges removed. Powder coated tow hooks red. Linex bed lining front bra film and flares along with full ceramic coat. Ceramic Pro interior plus windshield treatment. Toyota running boards and TRD anti sway bars in front and rear along with blacked out exhaust tip. TRD door latch cover plates. Full VLED light upgrade puddle, license, interior added footwell plus rear tail light brake, reverse. Added ASM turn signal LED's in front. OPT 7 tailgate light in red. Baja Design amber squadrons wc in front and SR2 Pro's in amber on rear bumper. Filmed reverse light in back, added red shackle on tow hitch and new license plate in front. Custom painted badge on tailgate. 3M crystalline on windshield and sunroof. Ceramic window film on rear seat windows. Added dirty deeds 8 inch stainless and summit racing dual tip. Soundproofed floor with foam and mass loaded vinyl. Black Bedslide added to bed.
    3 d printer?
     
  5. Feb 12, 2019 at 9:04 PM
    #35
    Mr Swervlin

    Mr Swervlin "YES.....In Dee Face"

    Joined:
    Aug 21, 2017
    Member:
    #9180
    Messages:
    444
    Gender:
    Male
    O H I O
    Vehicle:
    2017 Silver Sky limited TRD Crewmax
    Line X bed liner Window tint AVS in channel vent visors Paint protection wrap Husky front & rear floor liner ESP Crewmax rear storage Console organizer and tray TRD shift knob TRD rear sway bar Thule exporter pro 500 Color matched door handles, side mirrors, and grill surround VLEDs interior/reverse/cargo Driver side grab handle 10" BAmuffler Trd pro headlights
     
  6. Feb 13, 2019 at 3:23 AM
    #36
    phogallen

    phogallen [OP] My Last Mid-Life Crisis

    Joined:
    Nov 24, 2018
    Member:
    #22111
    Messages:
    713
    Gender:
    Male
    First Name:
    Dan
    Kansas
    Vehicle:
    2019 Black 1794 Fusion Edition
    TRD Pro Grill, front bumper end caps, mirror caps and door handles blacked out. ATC Cap, Cap Pack 6 Gun Drawer, LED lights in CAP, Rhino rails on top, 12 volt accessory plugs. Weathertech floor mats, after market antenae. 45 Ceramic tint film to driver and passenger door. Coachbuilder shims ,+2 shackles, steering kit, bumper shims, Bora 1.25 wheel spacers Bilstein 5100's on mid setting. BW flares with blacked out Route 66 screws. Gloss black powder coated OEM rims and Cooper 295/70/18 Cooper ST MAXX. Tech12Volt sound system upgrade...JL C2's doors and C1's on dash, 5 channel JL amp, 2 10inch subs in custom box and DSR1 sound processor...Soundskins in doors and back wall. Trunk and body badges removed. Powder coated tow hooks red. Linex bed lining front bra film and flares along with full ceramic coat. Ceramic Pro interior plus windshield treatment. Toyota running boards and TRD anti sway bars in front and rear along with blacked out exhaust tip. TRD door latch cover plates. Full VLED light upgrade puddle, license, interior added footwell plus rear tail light brake, reverse. Added ASM turn signal LED's in front. OPT 7 tailgate light in red. Baja Design amber squadrons wc in front and SR2 Pro's in amber on rear bumper. Filmed reverse light in back, added red shackle on tow hitch and new license plate in front. Custom painted badge on tailgate. 3M crystalline on windshield and sunroof. Ceramic window film on rear seat windows. Added dirty deeds 8 inch stainless and summit racing dual tip. Soundproofed floor with foam and mass loaded vinyl. Black Bedslide added to bed.
    Here is the SPod touchscreen diagrams...I think a center console mount that had a slight angle and could be positioned towards the driver would be ideal. The articulating bracket is pretty bad as is the Unholy mount that gets attached to the A/C vent.

    [​IMG]
     

    Attached Files:

    Last edited: Feb 13, 2019
  7. Feb 13, 2019 at 2:54 PM
    #37
    1811 Tactical

    1811 Tactical 1811 Tactical

    Joined:
    Dec 30, 2018
    Member:
    #23706
    Messages:
    13
    Mississippi
    Vehicle:
    2019 Tundra TRD Pro
    Need this!
     
  8. Feb 13, 2019 at 2:55 PM
    #38
    matictundra

    matictundra New Member

    Joined:
    Jul 20, 2017
    Member:
    #8654
    Messages:
    248
    Gender:
    Male
    First Name:
    Franco
    AZ
    Vehicle:
    2017 Red Tundra SR5 4x4 CM
    Leveling Lift 3"/1.5" (6112 with a CB shim and JBA UCA, and 5160 and Toytec Shackles Nitto Terra Grappler G2 295/60R20 on Blk Fuel Vector Front and Rear TRD Sway Bars Amp Power Step EVO-One Remote Start Black Powder Coated Bumper Caps Colored Matched Front Bulge and TRD Pro Grill Assy RCI skid plate LED interior lights. Added front and rear footwell led lights. Blue LED lit lock/window switch. Black TRD shift knob Toyota Cargo LED Spyder Headlights (LED Hikari Bulb + Re-wired LED bar as DRL) Limo Tint (all around) Relocated Rear Diff Breather Rear Brake Line Extension Debadged
    Machine from black delrin (thermoplastic).
     
    Berdine likes this.
  9. Feb 13, 2019 at 11:09 PM
    #39
    ZappBrannigan

    ZappBrannigan New Member

    Joined:
    Dec 31, 2018
    Member:
    #23724
    Messages:
    358
    Gender:
    Male
    Hawaii
    Vehicle:
    2018 1794 MGM
    NVS light bar

    This really looks great. Well done sir. Well done.
     
  10. Mar 17, 2019 at 12:15 PM
    #40
    Pat

    Pat Sorta-new Member

    Joined:
    Jul 19, 2018
    Member:
    #17191
    Messages:
    135
    Gender:
    Male
    First Name:
    Pat
    Virginia Beach
    Vehicle:
    '16 MGM SR5 DC
    CAI, 5100's
    I bought one of these but I cant get it to sit flush, is there a trick or do I just have to muscle it?
     
  11. Jul 17, 2019 at 4:50 AM
    #41
    phogallen

    phogallen [OP] My Last Mid-Life Crisis

    Joined:
    Nov 24, 2018
    Member:
    #22111
    Messages:
    713
    Gender:
    Male
    First Name:
    Dan
    Kansas
    Vehicle:
    2019 Black 1794 Fusion Edition
    TRD Pro Grill, front bumper end caps, mirror caps and door handles blacked out. ATC Cap, Cap Pack 6 Gun Drawer, LED lights in CAP, Rhino rails on top, 12 volt accessory plugs. Weathertech floor mats, after market antenae. 45 Ceramic tint film to driver and passenger door. Coachbuilder shims ,+2 shackles, steering kit, bumper shims, Bora 1.25 wheel spacers Bilstein 5100's on mid setting. BW flares with blacked out Route 66 screws. Gloss black powder coated OEM rims and Cooper 295/70/18 Cooper ST MAXX. Tech12Volt sound system upgrade...JL C2's doors and C1's on dash, 5 channel JL amp, 2 10inch subs in custom box and DSR1 sound processor...Soundskins in doors and back wall. Trunk and body badges removed. Powder coated tow hooks red. Linex bed lining front bra film and flares along with full ceramic coat. Ceramic Pro interior plus windshield treatment. Toyota running boards and TRD anti sway bars in front and rear along with blacked out exhaust tip. TRD door latch cover plates. Full VLED light upgrade puddle, license, interior added footwell plus rear tail light brake, reverse. Added ASM turn signal LED's in front. OPT 7 tailgate light in red. Baja Design amber squadrons wc in front and SR2 Pro's in amber on rear bumper. Filmed reverse light in back, added red shackle on tow hitch and new license plate in front. Custom painted badge on tailgate. 3M crystalline on windshield and sunroof. Ceramic window film on rear seat windows. Added dirty deeds 8 inch stainless and summit racing dual tip. Soundproofed floor with foam and mass loaded vinyl. Black Bedslide added to bed.
    Is this done? Can you post up pics?
     
  12. Jul 17, 2019 at 6:10 AM
    #42
    matictundra

    matictundra New Member

    Joined:
    Jul 20, 2017
    Member:
    #8654
    Messages:
    248
    Gender:
    Male
    First Name:
    Franco
    AZ
    Vehicle:
    2017 Red Tundra SR5 4x4 CM
    Leveling Lift 3"/1.5" (6112 with a CB shim and JBA UCA, and 5160 and Toytec Shackles Nitto Terra Grappler G2 295/60R20 on Blk Fuel Vector Front and Rear TRD Sway Bars Amp Power Step EVO-One Remote Start Black Powder Coated Bumper Caps Colored Matched Front Bulge and TRD Pro Grill Assy RCI skid plate LED interior lights. Added front and rear footwell led lights. Blue LED lit lock/window switch. Black TRD shift knob Toyota Cargo LED Spyder Headlights (LED Hikari Bulb + Re-wired LED bar as DRL) Limo Tint (all around) Relocated Rear Diff Breather Rear Brake Line Extension Debadged
    Yup and sunglasses holder is still functional.

    6858E842-D494-4145-AB0D-5CA9811C301F.jpg
     
  13. Jul 17, 2019 at 6:16 AM
    #43
    DZ_

    DZ_ New Member

    Joined:
    May 31, 2019
    Member:
    #31242
    Messages:
    44
    Frederick Co., Md
    Vehicle:
    2019 Tundra Crewmax Limited TRD
    What trim pieces (the carbon fiber look) are these?
     
  14. Jul 17, 2019 at 6:47 AM
    #44
    Berdine

    Berdine Ironhide

    Joined:
    Aug 2, 2017
    Member:
    #8877
    Messages:
    1,530
    Gender:
    Male
    First Name:
    Frank
    Binghamton, NY
    Vehicle:
    2016 MGM Crewmax TRD

    They're the stock ones, I covered them in carbon fiber vinyl
     
    DZ_ likes this.
  15. Jul 17, 2019 at 7:03 AM
    #45
    DZ_

    DZ_ New Member

    Joined:
    May 31, 2019
    Member:
    #31242
    Messages:
    44
    Frederick Co., Md
    Vehicle:
    2019 Tundra Crewmax Limited TRD
    Has it held up well?
     
  16. Jul 17, 2019 at 7:39 AM
    #46
    tanabersx

    tanabersx New Member

    Joined:
    May 27, 2018
    Member:
    #15642
    Messages:
    140
    Gender:
    Male
    First Name:
    Miguel
    Puerto Rico
    Vehicle:
    2017 Tundra DC SR5 XP
    I have the Switch Pros 9100 and really like the programming options for every switch and their bluetooth control/ interface.
    EE12B9AA-613E-4F49-8860-98B62DD21545.jpg
    F0069A15-3BDB-400A-B926-D7D64659171C.jpg
     
  17. Jul 17, 2019 at 7:55 AM
    #47
    texasrho83

    texasrho83 Teacher in a Tundra

    Joined:
    Mar 30, 2017
    Member:
    #7025
    Messages:
    730
    Gender:
    Male
    First Name:
    Charles
    Conroe TX
    Vehicle:
    2016 DC MGM 4x4
    I've done a little..
    $550 for a switch panel is outright nuts imo, but I get that everyone has their own idea of what’s worth the extra dinero.
     
  18. Jul 17, 2019 at 7:57 AM
    #48
    Amnesiac

    Amnesiac When I am king, you will be first against the wall

    Joined:
    Apr 26, 2019
    Member:
    #29671
    Messages:
    215
    Gender:
    Male
    First Name:
    Mike
    PDX
    Vehicle:
    2019 Superwhite TRD Sport
    I’m currently working on doing a customer toggle switch panel where the factory trailer brake controller is. Although, I did learn that I’d you disconnect that controller you will get an error that you can’t clear. So I reconnected it and tucked it under the dash. I will being doing a fuse block, terminal block, and 4 relays mounted to the top of the fuse box. Slow work in progress, currently mocking everything up.
     
  19. Jul 17, 2019 at 10:04 AM
    #49
    Berdine

    Berdine Ironhide

    Joined:
    Aug 2, 2017
    Member:
    #8877
    Messages:
    1,530
    Gender:
    Male
    First Name:
    Frank
    Binghamton, NY
    Vehicle:
    2016 MGM Crewmax TRD
    Corners peeled up in the really cold winter, I also used cheap vinyl from Amazon
     
    DZ_ likes this.

Products Discussed in

To Top