Custom Glocks Please!!

I've got a plain G5 19 with factory night sights and am considering customizing it or buying another to "trick out" leaving this one alone. Many thoughts running through my head like just ordering a MOS slide and adding an RMR with a lighter dissconnector, going full custom slide with barrel and frame etc. Or again leaving this one alone and buying another one as my blank canvas. Not wanting a race or competition weapon just something different and unique that I can still carry. I'd love to see pics and descriptions of mods.

Thanks.

 

Contact Landers Weapon Systems.

 

War Poet Pistol sold through Sportsman's Guide. John Lovell knows his stuff and is a Glock guy.

 

My open G17 that I built years ago, before you could buy them.

FWIW, I have 100K rounds through several Glocks and the only issues I've ever seen were on Glocks that had non factory parts. When it comes to carry Glocks I leave them as they came.

 

Aftermarket threaded barrel and tall suppressor height night sights plus a Glock slide catch / release.

 

I may just either get a MOS or order a milled slide for my current 19 or even a factory Glock MOS slide and do a RMR with suppressor height sights keeping everything the same except for maybe a 3.5 connector. If I go with a slide I can keep the 19 I have and switch back and forth but at the same time I wouldn't mind having a second weapon, maybe even a 17, "tricked out". My G5 19 is the early version with the half moon cut on the front grip and no FS serrations and it's US made although that doesn't seem to matter. Just toying with ideas and would love to see some members customs.

 

Well to get started i just ordered a Wilson Combat 3.5 connector, WC 4.5# striker spring, and their flat performance trigger assembly. Thinking about their barrel just need to see how much goes into making it fit, one plus is im only 35 minutes from their facility.

 

I printed Wilson Combat's custom work sheet and I may take my 19 over there (since I'm 35 minutes away) and have their match stainless barrel fit and installed with flush cut and reverse crown, along with some frame work like stippling and trigger guard cuts. While I'm at it I may have the slide top serrated and a worn finish applied. Since guns are scarce I figure I'll just take the money I had to buy a new one and trick out my Glock. It'll wind up looking something like this.

 

I just saw it as a head start on a molded glock for the OP. I'm not a glock guy and wouldn't buy it. Never held one that I liked the feel of, and I feel you can get better/more features at their price point. CZ is essentially a glock with better features IMO.
Not surprised to hear about the trigger after watching John's video on not modifying triggers.

 

I put this G45 MOS together last week. I have giant hands, so the 19 was just a bit too small. My duty piece was a G23, had to use a mag extension to grip, and I've put thousands of rounds through it. I love Glocks, they just work. I don't change their internals, because they just work, well.

I put Suppressor height sights, black in the rear, tritium up front.
An Adjustable 3.25 MOA RMR
The TLR-7A, with the high switch.
The only thing that tripped me up, was you need a special adapter plate that does not come with the MOS plates OR with the Trijicon RMR. It's the Glock MOS adapter plate for the RMR. It needs to be purchased separately, otherwise your screws on the slide will be too long.

 

I love his channel, I've been trying for years to get a spot in his Pistol 1 and 2 classes. I think the only way is to be a Patreon subscriber to get advances notice.

 

I love the Ameriglo Ghost Ring on my Glock. Besides that, mine is stock and I love how it shoots!

 

Here is my Gucci Glock 17, too many parts to list, don't ask me how much you don't want to know lol



Defkon3 / frame work
Statement defense / slide work
Agency / Barrel & magwell
Apex / trigger
Kagewerks extended slide release / not shown
RMR / switching to SRO
Angry bear suppressor sights / not shown

 

Totally BA!!!!

 

Start with a P80 frame, go from there

 

If you want an RMR, have the slide milled. The MOS system isn’t very good. A direct mill is going to be much more solid. Plenty of shops will do milling plus cerakote for around $100-$150. A red dot, suppressor height sights and a light is about as Gucci as I get.

 

https://dangerclosearmament.com

Saw these over the weekend. Mine is pretty basic, only thing so far is added a crimson trace laser.

 

I second this. The MR920 by Shadow Systems is an awesome gun (what the War Poet model is based on). I recently purchased a 920 Combat with optic cut and threaded barrel and this thing is amazing.

 

Customized with a Glock 'Hog Barrel'.

 

I think the 10mm is definitely my next glock purchase

 

DP Custom Works does some nice work. I have had my G17 and G19 done by him and very satisfied with both. I went pretty basic with G19 I think he called it the EDC package, mainly just extra serrations for grip. and with The G17 I went a little more custom with the serrations and and side windows(GAB 3.0 package). Went with black DLC on both, but he offers many coating options if you want to get crazy with it.

G17

G19

 

I picked up a Shadow Systems MR918 about 18 months ago and its become my favorite handgun.
I'm going this week to pick up a Blue Label G19 since my works transitioning to G19 in January.




Oops the pictures came out upside down.....

 

You should totally get the MR920 also.

 

I’m looking for one but they are like hens teeth.

 

I know where you can find a Combat 920. It’s black with the gold fluted barrel. If you want it we can have it to you in a few days time.

 

Just added a Olight Baldor RL in FDE to my MR918. Just sighted in the Red Laser today. Had to fit the holster to fit the light. Turns out the lense houseing is about 1/16" longer than a streamlight TRL1. Its now my official backup when I'm hog hunting.

 

This is my EDC. Bought a bone stock G19 Gen 4 MOS. Did a DIY stippling and double undercut. Sent the slide to jagerwerks to do some slide milling, open ports, and serrations. After that it went to blowndeadline for a custom cerakote job. I have an Apex flat trigger with a Frankenstein trigger internals (lots of different companies). Threw Ameriglo suppressor height sights and Trijicon RMR Type 2. I also have an extended mag release and an o-light PL-mini 2. Like I said, this is my EDC, I carry her appendix every day.

 

Not mine, but my bros. Totally tricked out.

I am a Simple Man, I prefer not so flashly.


O.S.T.

 

I don't think I could rock that. Looks too much like a SIRT. I could see things going real wrong during a class for instance.