1. Welcome to Tundras.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tundra discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Tundra owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Bagged c10

Discussion in 'Other Builds' started by Mountun Goat, Dec 9, 2018.

Page 1 of 4
  1. Dec 9, 2018 at 9:32 PM
    #1
    Mountun Goat

    #1
    Mountun Goat [OP] She baaaaaahd

    Joined:
    Feb 19, 2018
    Member:
    #13002
    Messages:
    5,752
    Gender:
    Male
    First Name:
    Dan
    EhBerta, Canadia
    Vehicle:
    It’s a Goat.
    CAAACC91-20D9-4796-8F73-CCF52E6D8280.jpg
    Ok. First off, I have an addiction to my summer girl. So I need to share her here too... I’ve built this truck in 4 years in my garage. I have been enjoying driving it for the last year and a half. It’s definitely a build in progress, but I need to enjoy driving it for a while before ripping it apart again. Here’s the breakdown:

    1978 Chevy C10 Custom Deluxe Stepside sittin on the frame rails.


    F3312805-F5EB-482B-92DA-6849AACE5CC2.jpg
    Originally, this was a 350ci truck. I’ve swapped a 2002 junkyard 5.3L LS iron block paired with a 4l60e trans. The motor has intake, shorty headers and dual 3” exhaust with 6” bullet muffs into turnouts. As motor is still fuel injected, the computer has been reprogrammed for 91 octane fuel and has the torque management deleted. Also, the rpm redline was increased to 6500k. The truck is pretty snappy for an all stock junkyard motor.
    77832AB7-8F73-4957-A2D9-8A08A0DD8CFC.jpg

    CA79D08D-BE93-4B6A-9C75-45EF24D3621B.jpg
    In the front of the chassis, I pancaked the front crossmember an 1 3/8” for the static drop. I modded the lower control arms with bag cups. Then, I installed 3” drop spindles and stuffed the 7” airbags into place. For the rear, I cut in 12” axle notches into the frame. The axle actuates on a triangulated 4 link and the bag over axle provides the cushion. Two Viair 440 compressors fill the air tanks. I used stainless steel tubing for all the air lines running to and from all 8 solenoids.
    1BFB1F54-4A0C-47CA-8791-2E5E7DF96DFF.jpg

    For the interior I have a simple 90s Chevy Silverado 60/40 with cup holders cut into the center seat. More to come in this department.
    C480FA1D-5036-4A9A-B7CF-AB4932585EB7.jpg

    Anyway, hope you enjoy the art of it if anything. She ain’t pretty but it fun to play with and learn on. Keep on truckin’

    EC0BA870-8483-48EC-97C4-FB471C2A34D1.jpg
    986D873B-7B10-4A02-BC7A-7FA52EBE5646.jpg
    5662D426-B7B2-4226-A680-079B951DC54F.jpg
    4FE634B0-2BF6-463D-B7AD-23805C461E98.jpg
    B3055A54-00B5-4829-8CD1-11A21C1EFA36.jpg
     
    Last edited: Dec 9, 2018
    Mountun Goat, Dec 9, 2018
    #1
    Kwe1982, don3032, Luckydog and 30 others like this.
  2. Dec 9, 2018 at 10:24 PM
    #2
    Broncobroke

    #2
    Broncobroke Super White Power

    Joined:
    Dec 13, 2017
    Member:
    #11499
    Messages:
    316
    Gender:
    Male
    First Name:
    Charlie
    Piedmont, NC
    Vehicle:
    2017 White Tundra 1794
    Dude. That. Is. Awesome.
     
    Broncobroke, Dec 9, 2018
    #2
    Mountun Goat[OP] and smslavin like this.
  3. Dec 10, 2018 at 2:30 AM
    #3
    Grumpy Uncle

    #3
    Grumpy Uncle Pushing string down the hall SSEM #10

    Joined:
    Jul 29, 2017
    Member:
    #8801
    Messages:
    12,888
    Gender:
    Male
    First Name:
    Pat
    CO
    Vehicle:
    2016 Black CM Tundra TRD Off Road
    4:88s and Auburn LSD, dealership faux Pro, 35" BFGs on XD wheels, OME Lift with Dakars
    That is BA!
     
    Grumpy Uncle, Dec 10, 2018
    #3
    Mountun Goat[OP] likes this.
  4. Dec 10, 2018 at 2:41 AM
    #4
    Prostar 190

    #4
    Prostar 190 SSEM #9 I would rather be water skiing

    Joined:
    Sep 26, 2017
    Member:
    #9912
    Messages:
    69,708
    Gender:
    Male
    First Name:
    Bryan
    OH
    Vehicle:
    2010 CrewMax limited 4X4
    6" lift 35" Toyo M/T
    Good looking truck!
     
    Prostar 190, Dec 10, 2018
    #4
    Mountun Goat[OP] likes this.
  5. Dec 10, 2018 at 5:12 AM
    #5
    Black Wolf

    #5
    Black Wolf Bigfoot Hunter, Sasquatch too, but not Yeti

    Joined:
    Apr 20, 2014
    Member:
    #378
    Messages:
    40,172
    Gender:
    Male
    First Name:
    Matt
    Aurora CO
    Vehicle:
    2022 Nissan Frontier SV 4X4
    TuwaPro rack, Z1 Offroad stuff, NISMO suspension stuff, FlowmasterFX Extreme exhaust, AIS, OVS, J&L can, other goodies on the way
    Wicked as hell! Has to be kick ass to drive.
     
    Black Wolf, Dec 10, 2018
    #5
    Mountun Goat[OP] likes this.
  6. Dec 10, 2018 at 5:27 AM
    #6
    Deuxlatch

    #6
    Deuxlatch AirBus

    Joined:
    Aug 17, 2018
    Member:
    #18243
    Messages:
    436
    Gender:
    Male
    First Name:
    Chris (Latch)
    Tomball, Tx./Lafayette, La.
    Vehicle:
    2010 Super White Tundra CM
    TRD Supercharger, TRD Big Brake kit, MotoMetal wheels, Undercover Tonneau with dual swing out saddle bag tool boxes.
    I love old square bodies from the 70s.
     
    Deuxlatch, Dec 10, 2018
    #6
    Mountun Goat[OP] likes this.
  7. Dec 10, 2018 at 5:50 AM
    #7
    Fishman57

    #7
    Fishman57 New Member

    Joined:
    Oct 14, 2018
    Member:
    #20524
    Messages:
    2,271
    Gender:
    Male
    First Name:
    Wayne
    Bucks County, PA
    Vehicle:
    2019 Tundra 1794 Barcelona Red Crewmax
    BakFlip MX4 Tonneau, 12 Volt Solutions Remote Starter More minor mods coming
    Sweet!
     
    Fishman57, Dec 10, 2018
    #7
    Mountun Goat[OP] likes this.
  8. Dec 10, 2018 at 5:56 AM
    #8
    BestGen

    #8
    BestGen Free Kyle!

    Joined:
    Jan 30, 2017
    Member:
    #6154
    Messages:
    2,497
    Gender:
    Male
    First Name:
    Paul
    Haunted Turnbull Canyon CA
    Vehicle:
    '05 RCLB, 2UZ-FE, 4wd / '88 4RNR XTE 22RE/W56/RF1A
    Fabtech 2.5" coilovers, BFG KO2 34/10.5/17, 17x7.5 TE wheels, add-a-leaves, 4.56 gears, Rhino-lined
    Those are the beefiest c-notches I've ever seen! :thumbsup:
    This makes me really miss my old Chevys. :(
    Edit: Love all the custom cab work, the shaved driprails, cowl, wiper delete. Sweet. Did they fill the seam at back of the roof?
     
    Last edited: Dec 10, 2018
    BestGen, Dec 10, 2018
    #8
    Mountun Goat[OP] likes this.
  9. Dec 10, 2018 at 7:07 AM
    #9
    smslavin

    #9
    smslavin Behind a lens...

    Joined:
    Jul 15, 2017
    Member:
    #8578
    Messages:
    7,208
    Gender:
    Male
    First Name:
    Sean
    Hudson Valley
    Vehicle:
    2016 Tundra CrewMax SR5
    Some stuff
    :headbang:
     
    smslavin, Dec 10, 2018
    #9
    Mountun Goat[OP] likes this.
  10. Dec 10, 2018 at 7:23 AM
    #10
    speckmon

    #10
    speckmon Must. Have. Pow.

    Joined:
    Sep 25, 2017
    Member:
    #9891
    Messages:
    1,120
    Gender:
    Male
    Thornton, CO
    Vehicle:
    '07 mountain road bomber
    Fuckin dig it dude.

    Any future plans? I like the mismatched body, but nice paint is always killer on a c10.
     
    speckmon, Dec 10, 2018
    #10
    Mountun Goat[OP] likes this.
  11. Dec 10, 2018 at 8:30 AM
    #11
    15whtrd

    #11
    15whtrd Mr. Blonde

    Joined:
    Sep 20, 2015
    Member:
    #1829
    Messages:
    9,387
    Gender:
    Male
    First Name:
    Sean
    SoCal
    Vehicle:
    White 2015 Tundra DC SR5 TRD 4x4 5.7L, White 2003 Sequoia 2WD
    TRD Pro suspension, +2 Coachbuilder shackles, 2015 TRD Pro headlights, 20% ceramic tinted windows, clear ceramic tinted front windshield, aFe drop in pro s dry air filter, TRD airflow accelerator, TRD oil fill cap, TRD 18 psi radiator cap, BDX Bullydog tuner, Weathertech floor mats front and rear, rear seat fold down mod, DNA hard trifold tonneau cover, Linex with uv protection, TRD rear swaybar, TRD center caps, TRD Pro grille insert with color matching surround and bulge, TRD PRO headlights, aluminum oil filter canister, Real truck tailgate seal, Pop-n-lock tailgate lock actuator, rear diff breather relocate, RCI front skid plate. 275/70 R18 BFG KO2s
    Sick! I love it! Looks fun to drive and play around with.

    I had a 78 C 10 stepside just like that as a work truck. My boss had it all cherried out, swapped the bed for service bed. I loved that truck. Just stock 350. It used to be a straight six. One of my favorite body styles. If I find some pics I’ll post them up.
     
    15whtrd, Dec 10, 2018
    #11
    Mountun Goat[OP] likes this.
  12. Dec 10, 2018 at 9:11 AM
    #12
    GravityGear

    #12
    GravityGear Parking Lot Prerunner

    Joined:
    Sep 9, 2018
    Member:
    #19180
    Messages:
    1,965
    Gender:
    Male
    First Name:
    Matt
    Aurora, CO
    Vehicle:
    2014 Black DC TSS Off Road 4x4 5.7
    Transfer Flow tank, Pinstripe Suit
    Does this drag bumper?
     
    GravityGear, Dec 10, 2018
    #12
    Mountun Goat[OP] likes this.
  13. Dec 10, 2018 at 9:48 AM
    #13
    15whtrd

    #13
    15whtrd Mr. Blonde

    Joined:
    Sep 20, 2015
    Member:
    #1829
    Messages:
    9,387
    Gender:
    Male
    First Name:
    Sean
    SoCal
    Vehicle:
    White 2015 Tundra DC SR5 TRD 4x4 5.7L, White 2003 Sequoia 2WD
    TRD Pro suspension, +2 Coachbuilder shackles, 2015 TRD Pro headlights, 20% ceramic tinted windows, clear ceramic tinted front windshield, aFe drop in pro s dry air filter, TRD airflow accelerator, TRD oil fill cap, TRD 18 psi radiator cap, BDX Bullydog tuner, Weathertech floor mats front and rear, rear seat fold down mod, DNA hard trifold tonneau cover, Linex with uv protection, TRD rear swaybar, TRD center caps, TRD Pro grille insert with color matching surround and bulge, TRD PRO headlights, aluminum oil filter canister, Real truck tailgate seal, Pop-n-lock tailgate lock actuator, rear diff breather relocate, RCI front skid plate. 275/70 R18 BFG KO2s
    No bumper to drag. But it looks like it drags license plate and possibly fender LOL f@ck yeah!
     
    15whtrd, Dec 10, 2018
    #13
    Mountun Goat[OP] and BestGen like this.
  14. Dec 10, 2018 at 3:59 PM
    #14
    Mountun Goat

    #14
    Mountun Goat [OP] She baaaaaahd

    Joined:
    Feb 19, 2018
    Member:
    #13002
    Messages:
    5,752
    Gender:
    Male
    First Name:
    Dan
    EhBerta, Canadia
    Vehicle:
    It’s a Goat.
    Haha thanks guys. It’s fun to play with yep. @GravityGear No bumper drag. Plate drags for sure. The frame rails drag hard af when I’m aired out haha. Ground off a bit of frame for sure. I need to get back under it and do some more work on it.
     
    Mountun Goat, Dec 10, 2018
    #14
    15whtrd likes this.
  15. Dec 10, 2018 at 4:00 PM
    #15
    Mountun Goat

    #15
    Mountun Goat [OP] She baaaaaahd

    Joined:
    Feb 19, 2018
    Member:
    #13002
    Messages:
    5,752
    Gender:
    Male
    First Name:
    Dan
    EhBerta, Canadia
    Vehicle:
    It’s a Goat.
    Thanks. I will paint it one day for sure. I’m in no rush cause driving it is wicked fun haha
     
    Mountun Goat, Dec 10, 2018
    #15
    15whtrd likes this.
  16. Dec 10, 2018 at 4:02 PM
    #16
    Mountun Goat

    #16
    Mountun Goat [OP] She baaaaaahd

    Joined:
    Feb 19, 2018
    Member:
    #13002
    Messages:
    5,752
    Gender:
    Male
    First Name:
    Dan
    EhBerta, Canadia
    Vehicle:
    It’s a Goat.
    I went big incase I went too small haha. First build in my garage so overbuild was my first thoughts haha. The back of the roof seam is filled too yep. I shouldn’t ever sell this cause I’ll miss it forever if I do haha
     
    Mountun Goat, Dec 10, 2018
    #16
    BestGen[QUOTED] likes this.
  17. Dec 10, 2018 at 4:03 PM
    #17
    Mountun Goat

    #17
    Mountun Goat [OP] She baaaaaahd

    Joined:
    Feb 19, 2018
    Member:
    #13002
    Messages:
    5,752
    Gender:
    Male
    First Name:
    Dan
    EhBerta, Canadia
    Vehicle:
    It’s a Goat.
    Yessir it a blast to rod in that’s for sure. A lot of smiles and good vibes. People either love it or hate it haha. The haters are the funniest tho
     
    Mountun Goat, Dec 10, 2018
    #17
    BestGen and Black Wolf[QUOTED] like this.
  18. Dec 10, 2018 at 4:07 PM
    #18
    Black Wolf

    #18
    Black Wolf Bigfoot Hunter, Sasquatch too, but not Yeti

    Joined:
    Apr 20, 2014
    Member:
    #378
    Messages:
    40,172
    Gender:
    Male
    First Name:
    Matt
    Aurora CO
    Vehicle:
    2022 Nissan Frontier SV 4X4
    TuwaPro rack, Z1 Offroad stuff, NISMO suspension stuff, FlowmasterFX Extreme exhaust, AIS, OVS, J&L can, other goodies on the way
    Keep the patina. Gloss paint it to seal the Koolness! I want a ride sometime. A bucketlister.... Riding in a bucket...heh....heh...
     
    Black Wolf, Dec 10, 2018
    #18
    Law323, Broncobroke, BestGen and 1 other person like this.
  19. Dec 10, 2018 at 4:09 PM
    #19
    Mountun Goat

    #19
    Mountun Goat [OP] She baaaaaahd

    Joined:
    Feb 19, 2018
    Member:
    #13002
    Messages:
    5,752
    Gender:
    Male
    First Name:
    Dan
    EhBerta, Canadia
    Vehicle:
    It’s a Goat.
    Haha I do like how it looks currently. Like I said one day maybe I’ll paint it to learn how to paint? But I’m torn because once I do that this is gone! Haha. And yes I’ll give free rides for sure! That’s half the fun of it
     
    Mountun Goat, Dec 10, 2018
    #19
    Black Wolf[QUOTED] likes this.
  20. Dec 10, 2018 at 4:17 PM
    #20
    BestGen

    #20
    BestGen Free Kyle!

    Joined:
    Jan 30, 2017
    Member:
    #6154
    Messages:
    2,497
    Gender:
    Male
    First Name:
    Paul
    Haunted Turnbull Canyon CA
    Vehicle:
    '05 RCLB, 2UZ-FE, 4wd / '88 4RNR XTE 22RE/W56/RF1A
    Fabtech 2.5" coilovers, BFG KO2 34/10.5/17, 17x7.5 TE wheels, add-a-leaves, 4.56 gears, Rhino-lined
    No way! Never sell it. I regret selling mine years ago. I can't afford to buy em back. :frusty:
    Get some titanium blocks for the back frame and hit some smooth road! :headbang:
     
    BestGen, Dec 10, 2018
    #20
    Black Wolf and Mountun Goat[QUOTED][OP] like this.
  21. Dec 10, 2018 at 4:19 PM
    #21
    Mountun Goat

    #21
    Mountun Goat [OP] She baaaaaahd

    Joined:
    Feb 19, 2018
    Member:
    #13002
    Messages:
    5,752
    Gender:
    Male
    First Name:
    Dan
    EhBerta, Canadia
    Vehicle:
    It’s a Goat.
    @GravityGear
    2D226378-8F6A-4EA7-A908-144009BBE844.jpg
     
    Mountun Goat, Dec 10, 2018
    #21
    Y0TA PR0, Black Wolf, BestGen and 1 other person like this.
  22. Dec 10, 2018 at 4:20 PM
    #22
    15whtrd

    #22
    15whtrd Mr. Blonde

    Joined:
    Sep 20, 2015
    Member:
    #1829
    Messages:
    9,387
    Gender:
    Male
    First Name:
    Sean
    SoCal
    Vehicle:
    White 2015 Tundra DC SR5 TRD 4x4 5.7L, White 2003 Sequoia 2WD
    TRD Pro suspension, +2 Coachbuilder shackles, 2015 TRD Pro headlights, 20% ceramic tinted windows, clear ceramic tinted front windshield, aFe drop in pro s dry air filter, TRD airflow accelerator, TRD oil fill cap, TRD 18 psi radiator cap, BDX Bullydog tuner, Weathertech floor mats front and rear, rear seat fold down mod, DNA hard trifold tonneau cover, Linex with uv protection, TRD rear swaybar, TRD center caps, TRD Pro grille insert with color matching surround and bulge, TRD PRO headlights, aluminum oil filter canister, Real truck tailgate seal, Pop-n-lock tailgate lock actuator, rear diff breather relocate, RCI front skid plate. 275/70 R18 BFG KO2s
    I say do a photina. Does look cool the way it is but it would be cool to make it look like an old worn out shop truck. You can just roll that stuff on and then scuff it off to make it look worn. There’s so many different ways you can do it you can’t screw up. And if you do, start over LOL.
     
    15whtrd, Dec 10, 2018
    #22
    Mountun Goat[QUOTED][OP] and BestGen like this.
  23. Dec 10, 2018 at 4:20 PM
    #23
    Mountun Goat

    #23
    Mountun Goat [OP] She baaaaaahd

    Joined:
    Feb 19, 2018
    Member:
    #13002
    Messages:
    5,752
    Gender:
    Male
    First Name:
    Dan
    EhBerta, Canadia
    Vehicle:
    It’s a Goat.
    That is def on my list of things to do on this truck haha. I gotta work on tundra this winter tho so back seat for old square body upgrades for now
     
    Mountun Goat, Dec 10, 2018
    #23
    Black Wolf and BestGen[QUOTED] like this.
  24. Dec 10, 2018 at 4:20 PM
    #24
    15whtrd

    #24
    15whtrd Mr. Blonde

    Joined:
    Sep 20, 2015
    Member:
    #1829
    Messages:
    9,387
    Gender:
    Male
    First Name:
    Sean
    SoCal
    Vehicle:
    White 2015 Tundra DC SR5 TRD 4x4 5.7L, White 2003 Sequoia 2WD
    TRD Pro suspension, +2 Coachbuilder shackles, 2015 TRD Pro headlights, 20% ceramic tinted windows, clear ceramic tinted front windshield, aFe drop in pro s dry air filter, TRD airflow accelerator, TRD oil fill cap, TRD 18 psi radiator cap, BDX Bullydog tuner, Weathertech floor mats front and rear, rear seat fold down mod, DNA hard trifold tonneau cover, Linex with uv protection, TRD rear swaybar, TRD center caps, TRD Pro grille insert with color matching surround and bulge, TRD PRO headlights, aluminum oil filter canister, Real truck tailgate seal, Pop-n-lock tailgate lock actuator, rear diff breather relocate, RCI front skid plate. 275/70 R18 BFG KO2s
    Everything is self clearanced!
     
    15whtrd, Dec 10, 2018
    #24
    Mountun Goat[QUOTED][OP] likes this.
  25. Dec 10, 2018 at 4:21 PM
    #25
    Mountun Goat

    #25
    Mountun Goat [OP] She baaaaaahd

    Joined:
    Feb 19, 2018
    Member:
    #13002
    Messages:
    5,752
    Gender:
    Male
    First Name:
    Dan
    EhBerta, Canadia
    Vehicle:
    It’s a Goat.
    Yep haha. Worked out well!
     
    Mountun Goat, Dec 10, 2018
    #25
    15whtrd[QUOTED] likes this.
  26. Dec 10, 2018 at 5:08 PM
    #26
    GravityGear

    #26
    GravityGear Parking Lot Prerunner

    Joined:
    Sep 9, 2018
    Member:
    #19180
    Messages:
    1,965
    Gender:
    Male
    First Name:
    Matt
    Aurora, CO
    Vehicle:
    2014 Black DC TSS Off Road 4x4 5.7
    Transfer Flow tank, Pinstripe Suit
    GravityGear, Dec 10, 2018
    #26
    Mountun Goat[OP] likes this.
  27. Dec 10, 2018 at 5:43 PM
    #27
    BestGen

    #27
    BestGen Free Kyle!

    Joined:
    Jan 30, 2017
    Member:
    #6154
    Messages:
    2,497
    Gender:
    Male
    First Name:
    Paul
    Haunted Turnbull Canyon CA
    Vehicle:
    '05 RCLB, 2UZ-FE, 4wd / '88 4RNR XTE 22RE/W56/RF1A
    Fabtech 2.5" coilovers, BFG KO2 34/10.5/17, 17x7.5 TE wheels, add-a-leaves, 4.56 gears, Rhino-lined
    Fauxtina paint job would look pretty sick. IMG_2597.jpgIMG_2595.jpg
     
    BestGen, Dec 10, 2018
    #27
    Stormtrooper81, 15whtrd and Mountun Goat[OP] like this.
  28. Dec 10, 2018 at 5:45 PM
    #28
    Mountun Goat

    #28
    Mountun Goat [OP] She baaaaaahd

    Joined:
    Feb 19, 2018
    Member:
    #13002
    Messages:
    5,752
    Gender:
    Male
    First Name:
    Dan
    EhBerta, Canadia
    Vehicle:
    It’s a Goat.
    Mountun Goat, Dec 10, 2018
    #28
    Black Wolf likes this.
  29. Dec 10, 2018 at 5:45 PM
    #29
    Mountun Goat

    #29
    Mountun Goat [OP] She baaaaaahd

    Joined:
    Feb 19, 2018
    Member:
    #13002
    Messages:
    5,752
    Gender:
    Male
    First Name:
    Dan
    EhBerta, Canadia
    Vehicle:
    It’s a Goat.
    Absolutely it would! My paint plan for now is to strip it to bare metal. Acid watch the steel then cover it with a semi transparent black. The idea being used leather looking while seeing the steel through it
     
    Mountun Goat, Dec 10, 2018
    #29
    Y0TA PR0, Major, 15whtrd and 1 other person like this.
  30. Dec 10, 2018 at 5:48 PM
    #30
    Black Wolf

    #30
    Black Wolf Bigfoot Hunter, Sasquatch too, but not Yeti

    Joined:
    Apr 20, 2014
    Member:
    #378
    Messages:
    40,172
    Gender:
    Male
    First Name:
    Matt
    Aurora CO
    Vehicle:
    2022 Nissan Frontier SV 4X4
    TuwaPro rack, Z1 Offroad stuff, NISMO suspension stuff, FlowmasterFX Extreme exhaust, AIS, OVS, J&L can, other goodies on the way
    "I gotta work on tundra this winter ".........you do have a garage...right.....I'm just doing the math....Alberta + winter= cold as....fill in the blanks....heh...heh..
     
    Black Wolf, Dec 10, 2018
    #30
    Mountun Goat[QUOTED][OP] likes this.
Page 1 of 4
Register FREE to Reply!
To Top