1. Welcome to Tundras.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tundra discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Tundra owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Any AJT Design interior parts owner?

Discussion in 'Sequoia Builds' started by BrandonL812, Feb 6, 2023.

  1. Feb 6, 2023 at 12:45 PM
    #1
    BrandonL812

    BrandonL812 [OP] New Member

    Joined:
    Aug 5, 2018
    Member:
    #17783
    Messages:
    979
    Gender:
    Male
    First Name:
    Brandon
    Vehicle:
    2017 Sequoia LTD
    Rx350 retrofitted, Morimoto Led fogs. interior and exterior leds swap. TRD drop in filter. Carbon filter delete. Led DRL panels. TRD Shift knob.
    Hey guys,
    I am looking to possibly purchase some parts from AJT Design. I have emailed them regarding a few interior pieces I’m interested in for my 2017 sequoia limited.
    They respond with they do not have anything for the sequoia.
    Which is ofd because the tundra and sequoia share lots of similar parts.

    piece in question i’d like to buy:
    1. Steering wheel trim plate. (They said not compatible due to the different cutout between sequoia and tundra).

    2. Door handles - this fit because my buddy with an 08 sequoia bought them and they fit fine.

    3. Climate control knobs - not sure if it will but i think it would due to the compatibility photos.

    Does anyone have these parts in their sequoia which can confirm compatible?
    Particularly #1 and #3.

    TIA
     
  2. Feb 7, 2023 at 7:11 AM
    #2
    Jiminy Cricket

    Jiminy Cricket New Member

    Joined:
    Jul 7, 2021
    Member:
    #65268
    Messages:
    42
    That's what I thought too, but they won't all work. That's as specific as I'm going to get, not going to help a d-bag company sell products.
     
  3. Feb 7, 2023 at 7:22 AM
    #3
    2020cement_tundra

    2020cement_tundra New Member

    Joined:
    Nov 9, 2020
    Member:
    #54676
    Messages:
    224
    Gender:
    Male
    First Name:
    Nick
    I have their vent rings shifter gate and shifter handle and I don’t have any issues with these
     
  4. Feb 7, 2023 at 7:27 AM
    #4
    1lowlife

    1lowlife Toxic prick and pavement princess..

    Joined:
    May 4, 2016
    Member:
    #3296
    Messages:
    7,944
    First Name:
    DADA
    THE GREAT STATE OF TEXAS
    Vehicle:
    2014 MGM DC SR5
    I don't know about your Sequoia fitting but I have several of his products.
    No issues with any of them..

    n8chbajh_zpsbestx0li_0f6f751eacbb2b2067c45d73ed07f0a4307f6d8e.jpg

    But he certainly seems to have pissed in @Jiminy Cricket wheaties in the past..:(:eek2:
     
    Jiminy Cricket and donellyd like this.
  5. Feb 7, 2023 at 7:30 AM
    #5
    azTony

    azTony member since sept, 2017 and over 1,600 messages

    Joined:
    Sep 16, 2017
    Member:
    #9693
    Messages:
    2,533
    Gender:
    Male
    First Name:
    Tony
    Sun Lakes, AZ
    Vehicle:
    *** OV Tune Order #4481 *** ECU 0CN21 ***
    2018 Tundra Platinum with Icon Stage 9 w/3.0 and billet UCA, Harrop Elockers, 5.29 on 37’s
    He seems like a very nice guy on the phone and E-mail
     
  6. Feb 7, 2023 at 7:37 AM
    #6
    BrandonL812

    BrandonL812 [OP] New Member

    Joined:
    Aug 5, 2018
    Member:
    #17783
    Messages:
    979
    Gender:
    Male
    First Name:
    Brandon
    Vehicle:
    2017 Sequoia LTD
    Rx350 retrofitted, Morimoto Led fogs. interior and exterior leds swap. TRD drop in filter. Carbon filter delete. Led DRL panels. TRD Shift knob.
    I ordered the parts anyway. I will update with result. My really concern will be the climate knobs. I really dont want to screw that up. There are post of people having alignment issue where it is not sync correctly when knob are turned up. Doesn’t match level. The other two parts are as simple as they can get. But, we will see.
     
  7. Feb 7, 2023 at 7:38 AM
    #7
    azTony

    azTony member since sept, 2017 and over 1,600 messages

    Joined:
    Sep 16, 2017
    Member:
    #9693
    Messages:
    2,533
    Gender:
    Male
    First Name:
    Tony
    Sun Lakes, AZ
    Vehicle:
    *** OV Tune Order #4481 *** ECU 0CN21 ***
    2018 Tundra Platinum with Icon Stage 9 w/3.0 and billet UCA, Harrop Elockers, 5.29 on 37’s
    If you want the climate knobs to work when you are done then it is easy “pay attention to the video”. If you get out of sync I am sure you can correct it but I don’t know how, I got mine first try. Just pay attention
     
  8. Feb 7, 2023 at 7:40 AM
    #8
    texasrho83

    texasrho83 DGAF#1

    Joined:
    Mar 30, 2017
    Member:
    #7025
    Messages:
    8,720
    Gender:
    Male
    First Name:
    Charles
    Conroe TX
    Vehicle:
    2016 DC MGM 4x4
    See build link
    Hmm never had a problem with them.

    I even mentioned some issues with the steering wheel emblem cover not having enough tape on it and/or the tape that was on it wasn't adhering well, and he sent me a little baggy with more tape strips.
     
    1lowlife and RobertD like this.
  9. Feb 7, 2023 at 7:41 AM
    #9
    BrandonL812

    BrandonL812 [OP] New Member

    Joined:
    Aug 5, 2018
    Member:
    #17783
    Messages:
    979
    Gender:
    Male
    First Name:
    Brandon
    Vehicle:
    2017 Sequoia LTD
    Rx350 retrofitted, Morimoto Led fogs. interior and exterior leds swap. TRD drop in filter. Carbon filter delete. Led DRL panels. TRD Shift knob.
    i did see the video and im a little nervous bout it. But i think i will try anyway.
     
  10. Feb 7, 2023 at 7:41 AM
    #10
    texasrho83

    texasrho83 DGAF#1

    Joined:
    Mar 30, 2017
    Member:
    #7025
    Messages:
    8,720
    Gender:
    Male
    First Name:
    Charles
    Conroe TX
    Vehicle:
    2016 DC MGM 4x4
    See build link
    Just work slowly and carefully. Do one knob at a time. I got it on my first try.
     
  11. Feb 7, 2023 at 7:42 AM
    #11
    BrandonL812

    BrandonL812 [OP] New Member

    Joined:
    Aug 5, 2018
    Member:
    #17783
    Messages:
    979
    Gender:
    Male
    First Name:
    Brandon
    Vehicle:
    2017 Sequoia LTD
    Rx350 retrofitted, Morimoto Led fogs. interior and exterior leds swap. TRD drop in filter. Carbon filter delete. Led DRL panels. TRD Shift knob.
    Look like he doesnt carry the logo emblem anymore on the site. Just the complete cover with his branding on it.
     
  12. Feb 7, 2023 at 7:42 AM
    #12
    texasrho83

    texasrho83 DGAF#1

    Joined:
    Mar 30, 2017
    Member:
    #7025
    Messages:
    8,720
    Gender:
    Male
    First Name:
    Charles
    Conroe TX
    Vehicle:
    2016 DC MGM 4x4
    See build link
    Toyota put a stop to him selling it
     
    1lowlife likes this.
  13. Feb 7, 2023 at 7:53 AM
    #13
    azTony

    azTony member since sept, 2017 and over 1,600 messages

    Joined:
    Sep 16, 2017
    Member:
    #9693
    Messages:
    2,533
    Gender:
    Male
    First Name:
    Tony
    Sun Lakes, AZ
    Vehicle:
    *** OV Tune Order #4481 *** ECU 0CN21 ***
    2018 Tundra Platinum with Icon Stage 9 w/3.0 and billet UCA, Harrop Elockers, 5.29 on 37’s
    I got one off Amazon for the steering wheel cover
     
  14. Feb 7, 2023 at 8:19 AM
    #14
    BrandonL812

    BrandonL812 [OP] New Member

    Joined:
    Aug 5, 2018
    Member:
    #17783
    Messages:
    979
    Gender:
    Male
    First Name:
    Brandon
    Vehicle:
    2017 Sequoia LTD
    Rx350 retrofitted, Morimoto Led fogs. interior and exterior leds swap. TRD drop in filter. Carbon filter delete. Led DRL panels. TRD Shift knob.
    Well that sux.
     
  15. Feb 7, 2023 at 8:19 AM
    #15
    BrandonL812

    BrandonL812 [OP] New Member

    Joined:
    Aug 5, 2018
    Member:
    #17783
    Messages:
    979
    Gender:
    Male
    First Name:
    Brandon
    Vehicle:
    2017 Sequoia LTD
    Rx350 retrofitted, Morimoto Led fogs. interior and exterior leds swap. TRD drop in filter. Carbon filter delete. Led DRL panels. TRD Shift knob.
    Those fit good? Fill in the gap like oem?
     
  16. Feb 9, 2023 at 8:23 PM
    #16
    BrandonL812

    BrandonL812 [OP] New Member

    Joined:
    Aug 5, 2018
    Member:
    #17783
    Messages:
    979
    Gender:
    Male
    First Name:
    Brandon
    Vehicle:
    2017 Sequoia LTD
    Rx350 retrofitted, Morimoto Led fogs. interior and exterior leds swap. TRD drop in filter. Carbon filter delete. Led DRL panels. TRD Shift knob.
    Here is the update.
    Steering wheel trim: Fit without issue
    Door Handles: Fit without issue
    Climate knobs: 3 out of 4 fit perfect. Except for the Fan level/Auto Mode knob.

    the factory Auto/Off knob is a little bit taller than the ajt knob. After install the button would not depress. Well it got depress too much and will not spring back to original position. Meaning the knob is too short and does not give enough room for the buttons to move up/down.
    All the other knobs works and click fine. Here is the photo of the height difference.
    so, it does not work for sequoia 2nd gen. it look silly with 1 silver and 3 black knobs. This will probably go back.
    A83525D8-C0F1-417C-8EB3-B6EC57EBE1BC.jpg 619F0F54-8AC1-4520-AAE2-FA40FC14C98D.jpg
    B4B385C6-D125-465F-92B1-67A8D04408C7.jpg

    this last picture is just a mock up of the 1 silver and 3 black. You can see, it’s strange looking.
     
    bulldog93 likes this.
  17. Feb 9, 2023 at 8:28 PM
    #17
    Ryan2103a

    Ryan2103a New Member

    Joined:
    Aug 31, 2022
    Member:
    #82701
    Messages:
    10
    Gender:
    Male
    Vehicle:
    11 Sequoia
    I had this same issue. It's been awhile since I installed mines, if remember correctly I folded a piece of paper and stuck it on the side and didn't tighten the screw too tight. Works perfectly fine now.
     
    1lowlife likes this.
  18. Feb 9, 2023 at 8:29 PM
    #18
    BrandonL812

    BrandonL812 [OP] New Member

    Joined:
    Aug 5, 2018
    Member:
    #17783
    Messages:
    979
    Gender:
    Male
    First Name:
    Brandon
    Vehicle:
    2017 Sequoia LTD
    Rx350 retrofitted, Morimoto Led fogs. interior and exterior leds swap. TRD drop in filter. Carbon filter delete. Led DRL panels. TRD Shift knob.
    Ok. Thanks for the tip. I may try it again tomorrow night after work.
     
  19. Feb 9, 2023 at 8:32 PM
    #19
    Ryan2103a

    Ryan2103a New Member

    Joined:
    Aug 31, 2022
    Member:
    #82701
    Messages:
    10
    Gender:
    Male
    Vehicle:
    11 Sequoia
    I'll try to get you a picture tomorrow cuz I'm not 100% sure if I explained that correctly lol. Sorry I installed that a while back ago.
     
  20. Feb 9, 2023 at 8:34 PM
    #20
    BrandonL812

    BrandonL812 [OP] New Member

    Joined:
    Aug 5, 2018
    Member:
    #17783
    Messages:
    979
    Gender:
    Male
    First Name:
    Brandon
    Vehicle:
    2017 Sequoia LTD
    Rx350 retrofitted, Morimoto Led fogs. interior and exterior leds swap. TRD drop in filter. Carbon filter delete. Led DRL panels. TRD Shift knob.
    Yeah. If u dont care to. I would really appreciate it. Photos help alot. I have a small idea of what you said. But if you have photo. That would clear any confusion.
     
  21. Feb 9, 2023 at 8:38 PM
    #21
    Ryan2103a

    Ryan2103a New Member

    Joined:
    Aug 31, 2022
    Member:
    #82701
    Messages:
    10
    Gender:
    Male
    Vehicle:
    11 Sequoia
    From what I remember the issue came when I tighten the screws right behind the auto/off knob. So that's what made me think about wedging a piece of paper around there. Had to play around with it before I found the right spot. Just don't tighten the screws too tight on that side.
     
  22. Feb 9, 2023 at 8:41 PM
    #22
    BrandonL812

    BrandonL812 [OP] New Member

    Joined:
    Aug 5, 2018
    Member:
    #17783
    Messages:
    979
    Gender:
    Male
    First Name:
    Brandon
    Vehicle:
    2017 Sequoia LTD
    Rx350 retrofitted, Morimoto Led fogs. interior and exterior leds swap. TRD drop in filter. Carbon filter delete. Led DRL panels. TRD Shift knob.
    During the test. I didnt have any screw on the back on yet. I did notice that if i pull the back away slightly, the Auto button would free up enough to work like normal. But not the OFF button. That was still stuck down.
     
  23. Feb 9, 2023 at 11:12 PM
    #23
    1lowlife

    1lowlife Toxic prick and pavement princess..

    Joined:
    May 4, 2016
    Member:
    #3296
    Messages:
    7,944
    First Name:
    DADA
    THE GREAT STATE OF TEXAS
    Vehicle:
    2014 MGM DC SR5
    His steering wheel logo covers were/are AWESOME.
    His covers have/had the curved face that most of the Esty and eBay covers don't have.
    Any of those I tried were flat, didn't stick well, and showed chrome underneath.
    It is a shame Toyota is so petty that they didn't get a cut, they threw a C&D on him..

    I wish I would have bought 25 of them and then hooked y'all up at cost..

    vgmggzu6_90e114b73e4e85e8f061a24bffc55df44fe6a2c2.jpg

    gu1cr3ye_529b2b385b42661424696fac0939663a94f1a299.jpg

    628l09mq_3ef8b6c82a1d065442515d66cf6565a73cdbaab2.jpg
     
    This site contains affiliate links for which the site may be compensated.
    #23
  24. Feb 10, 2023 at 2:36 AM
    #24
    TBS

    TBS New Member

    Joined:
    Oct 29, 2017
    Member:
    #10593
    Messages:
    607
    Vehicle:
    2021 SR5 CrewMax 4x4 Barcelona Red
    E50 extinguisher, Valhalla Plates, ESP Storage, Chrome Delete, Pwr Tailgate Lock,
    I have cover envy.
    (I am stuck with a cheap etsy knockoff that shows some chrome but is better than nothing at all)
    Would love a line on an original AJT model.

    I have a mix of AJT and Meso customs blackout trim. They both have great products and have been doing a great job a year later.
     
    Meso and BrandonL812[OP] like this.
  25. Feb 10, 2023 at 2:38 AM
    #25
    Tundra234

    Tundra234 New Member

    Joined:
    Nov 30, 2018
    Member:
    #22402
    Messages:
    16,058
    Gender:
    Male
    First Name:
    George
    Florida
    Vehicle:
    2020 Tundra DC SR5 Barcelona
    Alot of them
    You can always get a can of SEM Trim black and spray the silver knob.
     
  26. Feb 10, 2023 at 3:20 AM
    #26
    Shanet421

    Shanet421 (Semi) New Member

    Joined:
    Oct 17, 2020
    Member:
    #53708
    Messages:
    1,272
    Gender:
    Male
    San Diego,CA
    Vehicle:
    2013 CM 5.7L 4x4 SR5 Super White
  27. Feb 10, 2023 at 5:56 AM
    #27
    BrandonL812

    BrandonL812 [OP] New Member

    Joined:
    Aug 5, 2018
    Member:
    #17783
    Messages:
    979
    Gender:
    Male
    First Name:
    Brandon
    Vehicle:
    2017 Sequoia LTD
    Rx350 retrofitted, Morimoto Led fogs. interior and exterior leds swap. TRD drop in filter. Carbon filter delete. Led DRL panels. TRD Shift knob.
    Had some free time this morning to mess around with it. Thanks to @Ryan2103a for the paper tip. I got it done. I wedge a piece of paper, folded in half, between one of the post on the housing and slowly push the ajt knob down. It will not lock in but that’s ok. Now it have good hold and wont move. The Auto/OFF buttons now works like normal. Here are some photos. Please dont mind the mess. It will get button up later after work.
    Also note, that’s not the real TRD black shift Knob. It’s eBay special.
    DA8D991C-EF48-49DE-A320-BDDD04F667A6.jpg 66AE2232-7326-4D7D-8431-52150415120C.jpg FAF75F84-4FF3-4B38-AA64-A0C36E327AD8.jpg 09DD7611-0F1F-4D61-B1B3-31643A978915.jpg 1F5BE653-79C4-4108-9E50-70812BF48ABD.jpg BB047908-F029-4558-BE13-C112586A0C8C.jpg
     
    This site contains affiliate links for which the site may be compensated.
    #27
    Ryan2103a and 1lowlife like this.
  28. Feb 10, 2023 at 5:58 AM
    #28
    BrandonL812

    BrandonL812 [OP] New Member

    Joined:
    Aug 5, 2018
    Member:
    #17783
    Messages:
    979
    Gender:
    Male
    First Name:
    Brandon
    Vehicle:
    2017 Sequoia LTD
    Rx350 retrofitted, Morimoto Led fogs. interior and exterior leds swap. TRD drop in filter. Carbon filter delete. Led DRL panels. TRD Shift knob.
    Let me know what y’all think. i have the steering wheel emblem overlay from, of course Ebay, in the way. Im hoping it have good coverage since the ajt one are long gone. Which is really a bummer.
     
    This site contains affiliate links for which the site may be compensated.
    #28
  29. Feb 10, 2023 at 7:50 AM
    #29
    Ryan2103a

    Ryan2103a New Member

    Joined:
    Aug 31, 2022
    Member:
    #82701
    Messages:
    10
    Gender:
    Male
    Vehicle:
    11 Sequoia
    Awesome glad you got it done. If I have some time I'll still get you that picture. Clean setup :thumbsup:
     
    This site contains affiliate links for which the site may be compensated.
    #29
  30. Feb 10, 2023 at 8:47 AM
    #30
    BrandonL812

    BrandonL812 [OP] New Member

    Joined:
    Aug 5, 2018
    Member:
    #17783
    Messages:
    979
    Gender:
    Male
    First Name:
    Brandon
    Vehicle:
    2017 Sequoia LTD
    Rx350 retrofitted, Morimoto Led fogs. interior and exterior leds swap. TRD drop in filter. Carbon filter delete. Led DRL panels. TRD Shift knob.

Products Discussed in

To Top