2019 build. Will 305/65r18 leave me with regrets ?

It is a ready lift level kit. I'll have to take some side pics. Hopefully I can this evening.

 

I also say 295/70 R18, 3" x 1" lift/level, with Cooper ST Maxx skins!

 

Looks great with the color matched topper! Are you able to clear your garage door? Could you post the height of your door opening?

I'm going with the Procomp 3/1 a week this monday and it's going to very close if I can clear my garage with 295/70/18's. I want to keep the factory rims and upgrade from factory rubber.

 

The truck just clears, however I have the door adjusted to be higher than the low point of the door frame and trim work, photos attached! Opening from top of garage floor to bottom of door frame trim work is 6'-9", (6'-7" + 4" the height of tape measure - 2" the door frame and trim width).

 

My current 5100s KO2 285/65r18. Kinda hard to pick out from stock Michelin

 

Thanks I appreciate you taking the time to provide this info...I'm at 82 1/2" to the rubber trim so it's going to fit!

 

Looks great. Any rubbing?

 

Subbing this. I just purchased a 2019 cement SR5/TRD and definitely looking at a 3/1 level with 295’s on Methods. Have you looked at 17’s? Seems to make fitting easier with that same beefy look.

 

Woah ->

 

Thanks. Well I bent the skid plate up on both sides with a table mounted vice when I installed the leveling kit. The passenger side tire ended up rubbing that corner of the skid plate so I just cut it off. But that's the only place it rubbed. No cab mount chop needed.

 

I’m running 305/70/18, level kit and a little bit of cutting

 

Awesome looking truck!

 

I have 305/55/20 on my 19 Crew Max no offset.

 

Yeah... I'm gonna need more info on this. How much space do those front tires have?

 

305 you might have to chop. It’ll be fine going straight but lock to lock is where you’ll have your problem. 295/70 is the sweet spot.

Mine is on 18s +18 offset with icon stage 2 and cooper stt Pros

 

I'll have to take some photos with the wheels cranked but they fit. I had already taken the flaps off of the front and back of the wheel well.

 

Did you use spacers?

 

No spacers

 

Verrrryyy interesting. I thought for sure 295 would need spacers.

Thanks fo the info!!

 

No problem. I do have this pic of the uca. It's close but it doesnt rub either.

 

That’s a great shot. Part of me wonders if you were really romping if it would clip that? How flush are the tires to the fenders without the spacers? I’m guessing pretty close to flush.

If I did this I would probably add small spacers but I don’t want the tires to stick out more than just a little past the fender. Not a big fan of kicking up rocks against my door. Haha

 

Mmmm... idk. The only way it might would be if the wheel was at full extension. But I still dont think mine would touch. I'll have to take some side pics to show you how flush the tires are. They almost stick out a little already so even small spaces would probably cause some crap to sling up the side of your truck. Could always just add some fender flares to help with that.

 

You’re probably right. As long as its not rubbing I would probably be fine. Thanks for the side pics ahead of time!

 

285/70/17 TRD rock warrior wheels bone stock.

 

Oh god. These pictures for sure cost me some near-future money.

Thank you!

Truck is en fuego.

 

Haha thank you sir

 

Nice stance!

 

Looks great! What did you do lift wise?