What have you done to your 2.5 gen Tundra today?

Installed my Truxedo Pro X15 yesterday.

 

H16 in the fogs is

H16 in the fogs is correct.they are a very similar shape to h11 but much lower wattage. I think 19w vs 55w. You run the risk of burning the lens, housing, and most of all the wiring if you put in an h11 bulb

 

Geeon Blue LED Strip Lights Waterproof for Boats Auto Cars Trailers RV Motorcycle Bike Interior Exterior Lighting 12V 12'' 3528 SMD Pack of 4

That’s the strips I used. Bought off Amazon

 

can you post the actual link to it ? how long did it take?

 

Thanks

 

https://www.amazon.com/gp/aw/d/B07G...F8&qid=1547676934&sr=1&pi=AC_SX236_SY340_QL65

Took about 10 minutes total. Hardest part is popping off the cover for the switches.

 

BedRug bed Matt & Tailgate Matt.
Great fit and high quality.

Ronin.50 Cal Antenna. Awesome. Also because my Tundra is nicknamed “Bullet” named after my first horse as a kid I named “Bullet”. Love the legacy. And the antenna commemorates it

 

You're not going to burn up any wiring running led fog H11 bulbs. They use less power

 

Auxbeam H11 LED Headlight Bulb NF-S1 Series LED Headlights with 2 Pcs of H11 Philips CSP LED Headlight H8 H9 Conversion Kit 50W 8000lm 6000K Single Beam - 1 Year Warranty https://www.amazon.com/dp/B074GX852M/ref=cm_sw_r_cp_apa_i_Nb9pCbWEF1XHX

 

Man it’s a big difference. I will have to move around the rear a little to make more light come out the switch but the driver side is in point.

 

Also installed the Footwell light kit from vleds..... 10 times the light down there.
https://www.vleds.com/vehicle-speci...undra-interior/footwell/tundra-fwk-front.html

 

Totally stealing this next.

Here's what I finished up today:



Thanks to @NewImprovedRon and @831Tun for your brain dumps all over the 10 posts I read through

 

Oil change today, rotated tires, vacuum and detail interior. While changing oil noticed the battery terminals especially the positive had an insane amount of corrosion. I've never had a vehicle corrode up like that, Took the terminals off wire brushed and put back on. Start the truck it starts then dies immediately, then fires right back up. Head to home depot and ABS, TRAC, flashing brake light, rpm gauge dropping to zero while driving, mph all jumpy. Got back home completely took off the positive terminal put it in the vise and wired brushed it more, reinstall and everything back to normal now. These trucks do some weird things when the battery is disconnected or not 100% connection. Only thing I can think is when I first cleaned them up I must of dislodged something that reduced connectivity.

Any of you guys upgrade your terminals to something else/better?

 

Tech12Volt?

 

Completely stock Pro

 

Those dash speakers are from him. He makes those adapters in house and mounts the tweeters, really cool idea and he says they sound great. I hope to try to start a group buy for these kits in a month or 2, even if it's just the adapter plates. The subwoofer/box group buy went really well so hopefully he will do another one for us

 

ain't that the truth! you'd think on the 1794 or Platinum they would be illuminated.

 

I've always wondered this, its the same in my Tacoma. Only two things come to mind, its a cost cutting thing and its a reliability ratings thing. If there is no bulb to ever go bad in there then they never have a ding on the reliability aspect of it.

 

I wonder if something similar could be mounted behind the mirror switches.. not sure why those are not lit either

 

Wow! What size tire and how much higher is the Pro than the standard 4x4? I'm slowly turning mine into a Pro wanna be.

 

You’re killing me. Just bought that, too (bought led for window switches yesterday). What else have you done lately?

Saw your 41” light bar. What/where’d you get it? How’s the output? Is the hood bulge bar & bumper bar the same?
May get the hood bulge bar. Gonna eventually get an SSO winch bumper, so will hold off on bumper bar till then.

 

https://www.nilight.com/collections...2-style-mounting-brackets?variant=25013399689
This is the 41” light bar. I did have to cut the hood a little for a better fit.


https://www.roughcountry.com/toyota...MI4b-h9Ie_3wIVy8DACh0yVwU9EAQYASABEgLHf_D_BwE
Bottoms light bar. Bolts right up.
They both light up the night.

 

Yes the dash speakers are.... amp and subwoofer are off Amazon. I just wanted a little more for my country music and it’s perfect. I will soon be changing my front door speakers out also. That will complete my audio system.

 

I applied and fucked up my new decal.

 

Leave it in the sun and give it time. Often the air will permeate slowly thru the vinyl and turn out looking good

 

lets hope it does, its driving me insane at the moment.

 

Oh, how could I forget... I also plasti dipped my stock 20 inch wheels. 4 Cans of Black and 2 cans of Satinizer.

 

That looks way better. Looks like you changed the tires too.

 

yea, i went with a 3/2 "level" and 295/60/20 Ridge grapplers.I am super happy with the look. Somehow I dont have a full pic of the truck on my phone. I will post one later.

 

Amazing!!!