16-18 Tacoma wheels on 1st Gen Sequoia/Tundra

Has anyone put the 18 Tacoma wheels and tires on a 1st Gen Sequoia or Tundra. I found like new 16 inch wheels and tires from a 2018 Tacoma and want to put them on a 2002 Sequoia 2wd. The bolt pattern is the same but it’s showing the offset is different.

 

If the sequoia wheels are 16 inches also, you will be ok. If they are 17s, you will need to make sure the calipers clear the new rims.

 

I’ve seen the 2018 18” Tacoma limited wheels on a 06 Tundra, not sure about the 16’s though.

 

Yes the the Sequoia has 16” rims now.

 

Pretty sure the new tundras and sequoias only have 5 lugs and ours have 6

 

The rims will fit no problem. I personally would get 17s because there is a gx460/4runner bolt on brake caliper upgrade you can do for larger front and rear rotors. Dust shield replacing or removing may be required.

You should be able to find cheap new take offs from people off cl.

 

I found an excellent deal on 17inch 2019 Tacoma TRD Sport take offs. Can anyone verify that they will fit my 2005 Tundra Quad Cab 4x4 Limited. I currently have the stock 17 inch rims.

 

So you think a 2017 4runner 17" wheels 6 bolt should have no problem fitting on my 2000 Tundra?

I just have to replace the air valve stems as the ones i bought dont have any... and my rig doesnt have TPMS anyway.

 

Lug pattern is same and would fit over calipers.