Any body running 17" Methods

I'm also looking to get some 17w8.5 methods similar to this pick. I'm getting a front leveling kit 2.5-3 inch. I dont think I can get 35s with that setup. Any suggestions of the next size that would work without rubbing. I've been reading some good threads on here on what will work but hearing it from people first hand is nice.
10' crewmax

 

I'm wanting this exact setup. This is a 17x9 0 offset on 35s by 12.5. But my rim is gunna be a 8.5 instead. I dont care about cutting but if I have to get +25 I will but rather cut to fit 0

 

You can you just gotta cut

 

What's the average cost for that. Around $200?

 

To cut that. Idk I would do it yourself and save some money. Take the liners out. Easy. Cutoff wheel and then cut to what you need. I wouldnt know I'm sorry. All i know is I'm gunna have to cut ALOT lmfao

 

Btw deffintly look into toytec lift before the hockey pucks. I paid 920 for a 3 inch. coils fully assembled. Shackles and rear shocks

 

That pic is exactly what I'm trying to do. Requires some of the fender to cut I believe. The inner

 

Yes sir they are and yea it's a 3 inch lift. It def wouldnt work without the fenders.

The 8.5 inch wheel does narrow the tire a little. I thought the same thing but it really helps a little on the road. It doesnt seem to follow the road as bad.

 

I'll take some today. Tryingnto get her cleaned up.

 

Tundra and clean doesn’t add up

 

Lol its temporary extremely happy with how its come together..

 

Wowzer! I must stop staring at it, Black Friday is coming up

 

I’m looking at a 295/70r17 I don’t mind trimming fenders but don’t really want to do a bmc if I don’t have to.

 

That's pretty thin tire I think you're good

 

Jeezz dude. 37s worked on a 3 inch???? You have totally different fenders?? Or the flares and cut the fender out?

 

Yes sir lol and yea they are fiberglass fenders from @sdhq_offroad

 

What do you think about 285/75r17

 

And the rear is stock?

 

Again should be fine. What's gunna kill you is negitive offset and wide wheels and tires. I personally want to run a 17x8.5 with 0 offset, like I mentioned above with a 35x12.5. I got to cut all around my wheel wells but worth it to me

 

The rear has the icon rxt leaf pack which gets about 1.5. I'm actually going to add the extra leaf in the rear to get some of the rake back.

 

Damn! You were the same dude that was selling the ADS Mid-Travel lol. I wanted them but, you are tooooo far From
cali

 

Eric, your truck is looking the best kinda sweet!

Will you post a pic, how I is that big-ass heavy spare mounted in the bed, to the floor I assume?

Hey, if you update your member profile to show what region of the country you're in, you'll more often get answers to questions like this, i.e., even though I haven't got a BMC done, I've absorbed info on here about recommended fabrication guys local to SoCal and NorCal. So... if you do decide to get fab work done, let people on here know where, and probabaky others who didn't do their own cutting can point you to someone they at least trusted with their truck.

 

@Sunnier Kinda lol I have the @sdhq_offroad chase rack

I have the @sdhq_offroad chase rack in the bed!

 

Thanks!

 

That's the size tire I'm running, but on 17" Icon Rebounds with + 25 offset and 6112s set at 1.9" . No rubbing and easily clears the cab mount.

 

Pics?

 

Unfortunately not yet. If I can figure out how to post them, though, I’ll be glad to.

 

Okay so weights dont fit between the con6 wheela and the caliper. Shop put balance beeds in. Can anyone confirm they have weights on there wheels in a different spot

 

Weights. Just have them move the weights to the side.

 

HE SAID HE WONT AND CANT AND IM GUNNA SHOOT THIS GUY