Once again fuses blown Help

so once again I’ve reached my electrical limitations. Installed bd tuner. I thought I needed to tap into a fuse. Long story short I got carried away and probably blew a fuse. My frac harness does not work. No rear view camera. And when I turn on truck the traction control does not turn on. I can hold down button and it totally turn it off. But If I hit the button it does nothing. Anyone know what fuses I might have blown?

 

10 amp under dash for backup. Last week my rear camera started to get glitchy, so Monday I un plugged it and replugged it. Totally lost backup cam and trac control, and check engine came on. replaced fuse, reset code and its been fine all day. I also blew both fuses on the frac harnass so i have it unhooked for now. No idea how I blew them as I unhooked the battery.

 

Ahhh thank you so much. I was keeping myself up all night cursing myself lol

 

Hey guys. Sorry to hear about the fuse issues. They can be a pain, but they serve a purpose. @SMILE you have the first gen FRAC harness so you have two fuses. You can use a 2 Amp for each, or keep the original configuration of a 1 Amp and a 2 Amp. @Alexstundra, you have a V2 FRAC Harness, so you only have a single fuse and you can use a 2 or 3 Amp to replace it.

 

It’s

 

Where is the fuse located? And thank you

 

Is it behind the head unit

 

@Alexstundra I blew the harness ones (on frac harness) and the one under the steering wheel (10a - backup)

@TundraTex Thank you, now i can hook it back up.

For anyone else the 10amp fuse under the steering wheel took out the backup camera, traction control, cruise control, and the ability to shift gears manually. Also threw a code for the transmission range sensor. replaced fuse all good.