2019 TRD PRO Bull bars be aware!

I installed a Black Go Rhino bull bar on my Tundra but you'll need longer frame bolts that hold on your front tow hooks that go into the bull bar mounts. This is because the 1/4" thick aluminum skid plate takes up all the extra thread that usually isn't there on the non-TRD Pro models. Found out the hard way but got it done. The bolt thread is 12/125 fine and a hardness raring of about 8.8. Don't remember the length off hand but you'll need to take one of the frame bolts in with you to gauge the proper size.

 

Looks great.
Have a had any interference with the cruise control sensor. Most bull bar manufacturers say it will interfere, but it's hard to get a strait answer.

 

Haven't had any issues whatsoever with mine. It sits low enough not to interfere. Used it extensively just this last weekend going to and from Maine to CT.

 

With getting longer bolts.. where you able to keep the tow hooks? Or getting the longer bolt help with bolting the bull bar with skid plate? Could we see pics under near plz? Just order the Aries advantage bull bar