Rough Country 3" Leveling kit

I installed a 3" leveling kit on my 15 crewmax. Had it aligned, and now i get a vibration when slowing down. Any ideas whats going on?

 

Did u do anything to the rear? If you installed a block you could install a carrier bearing drop kit.

 

I did install the supplied block and front Diff spacers too.

 

Sounds like you have driveline vibrations and need the carrier bearing drop, can get them from toytec or coachbuilder. I made my own with some 3/4" steel spacers.

 

Carrier bearing drop kit

 

Contacted Rough Country and they are sending me one for free!!! AWESOME customer service!!!

 

Great service from rough country!

 

I got a 14 with the same lift. Made some shackles for it myself. Putting on spacers and tires in two weeks when I get another paycheck.

 

Very Nice.

 

Did you do the drop for your carrier bearing? I found out the hard way. LOL But Rough Country came through!! Amazing group. Amazing service.

 

I did not. I was wondering what that little bit of shimmy was that I was feeling after I put the lift on but it doesn't do it all the time. Just when the truck is sitting still all day at work. I get in it and creep across the parking lot and can feel just a slight vibration. Maybe I should contact them ass well... lol....s got away from me there. Or I could build one myself if you sent me the dimensions of the one you put on.

 

29.99 kit from rough country. That is a drive line vibration. that's what mine did.

 

According to some research it is a 3/4” drop. I just so happen to have - small piece of 3/4” plate. I will post those when I get done.

 

Nice man!! Definitely keep posting!!

 

Is it necessary to get a carrier bearing/differential drop on an icon stage 2 lift?

 

Usually if you lift your rear end you need a CB drop. I installed a rough country 3/2 lift, didn't do the cb drop, it's fine. But I am going to add one, just to be safe.