295/55/20 fit 2018 without rub or trimming?

Guys I need help on choosing the proper tire size for my 2018 platinum stock rims...will 295/55/20 ridge grapplers fit with no rub or trimming?

 

Click Forums. Scroll down to wheels and tires. Sticky thread at top Largest tires stock all gen.

 

I personally would opt for 275/60/20 rather than 295/55/20. They are both 33 inch tires. For stock wheels, 295s will be 10 mm closer to the suspension components (too close at least for for my comfort).

 

I believe the platinum wheels are 20x8 with a +60mm offset. with 295's, you might rub the UCA's. I have a 20x9 wheels with a+50mm offset with 295/55/20 ridge grapplers and there is about a 1/4" of clearance to the UCA:



you have 275/55/20 on your truck now, right? check the clearance from your tire to the UCA and see if you have at least 5/8" of clearance. putting on a 295 will soak up 1/2" of that clearance. also, if you can find a tire shop that will work with you, have them put on the 295 and see if it clears. if it doesn't, then you will have to go with a 285 or a 275. ridge grapplers have 285 and 275 options that you can use.

as far as the diameter on the 295/55/20 goes, you will have to remove the little front mud flap to prevent rubbing.

good luck

 

Thanks for the info guys

 

What

What did you end up doing?

 

Went with th 295/55/20 ridge grapplers with a fox 2.0 level kit

 

Nice! Thanks. Did it need the level to fit the tires?

 

Looks good, its time for new tires on my 2015 Limited DC. I wanted to try 295/55R20 also. I have TRD pro suspension. Did you have to trim anything?

 

Did you have to do the front level to fit them? Are you running wheel spacers?

 

What

What psi do you run front and back?