iJDMTOY fog lights

I bought these, just to check out:

iJDMTOY (2) 24W High Power 3-Inch 2x3 LED Pod Lights w/Fog Lamp Location Mounting Brackets & Wiring Kit For 2014-up Toyota Tundra

$113 iJDMTOY LED Pod Light Fog Lamp Kit Compatible with 2014-2021 Toyota Tundra, Includes (2) 24W High Power 2x3 CRE LED Cubes, Foglight Location Mount Brackets & Wiring/Adapter Harnesses

https://www.amazon.com/dp/B072FR1TPV/ref=cm_sw_r_cp_tai_DCxCBbHMA1F52

There’s a mounting bracket which calls for mounting to the OEM holes in the bumper caps. There are no holes in mine, the OEM dogs just clip in. This is the second set of bumper caps I’ve had, since I got new ones powder coated. The old ones didn’t have holes either.

I’m sending these back, but I was wondering if any of you have four screw holes in your bumper caps. There’s three reviews for them, and none mention not even being able to install them, so I’m confused.

 

I dont have any fog light mounting holes either.

 

So I had these... There should be a backing plate with the 4 holes. The lights sandwich into the fog light hole. No such holes exist in the fog light housing.

If my memory serves me right it goes front plate>bumper>back plate w/light>nuts

 

They were pretty darn bright and silly easy to install.

 

So the bumper is basically pinched between the two plates? Nothing attaches directly to it? I can see that, but the instructions called for it to be screwed to the OEM holes in the bumper.

 

Yeah exactly. It had locking washer and nuts on them. When I installed it, I used the blue loctite for sanity purposes.. Not sure I recall it stating to use the OEM holes on the bumper. Once I understood how to it secure in place I stopped reading

 

I’ll check it out before returning. Thanks.

 

For what its worth I got morimoto LED fog lights and I like them. They are in that price range and can be had for less during group buys and even used.

 

@War Machine what about Baja Design or Rigid?

 

These were relatively cheap. Less than half of Baja. I just wanted to check out the distinct look. The Morimotos look pretty similar to stock, right?
I honestly didn’t have high expectations for these. I just wanted to check them out.

 

Look up the rigid ones for instructions, there should be 3 plates, 1 plate goes behind the bumper, and 2 in front then the 4 bolts go through and sandwich together, in just took mine off last night, thinking of going a different route.

 

Morimoto do look stock but are darker I'm color with much better light output
2018 LED headlights, morimoto fogs and fog light anytime (relay) modhttps://www.tundras.com/threads/2018-led-headlights-morimoto-fogs-and-fog-light-anytime-relay-mod.29530/

 

https://www.tundras.com/threads/rigid-dually-d2-with-fog-light-brackets-plastic-bumper-120.27601/