1. Welcome to Tundras.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tundra discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Tundra owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

7400lb trailer causing sway

Discussion in 'Towing & Hauling' started by bjnbsullivan, Jul 29, 2015.

  1. Jul 29, 2015 at 6:38 PM
    #1
    bjnbsullivan

    bjnbsullivan [OP] New Member

    Joined:
    Jul 29, 2015
    Member:
    #1581
    Messages:
    6
    Gender:
    Male
    First Name:
    Bennie
    Vehicle:
    2012 toyota tundra
    I have a 2012 Toyota tundra SR5 Crewmax. I was told it will pull up to 10,000 lbs even being just a 1/2 ton pickup. I bought a 34' coleman travel trailer at 7400 empty weight. The truck pulls it with no problem, motor wise. it never boggs down or anything, but once I get over 50-55mph, the swaying gets rough and almost pulls me off the road. I have the weight distribution bars and sway control on it. I have to really hold on to steering wheel at all times with both hands and keep letting off the gas everytime it moves to stop the swaying. Just wondering if I need some other type of hitch, or if a larger truck would handle it better. Im thinking a longer wheel base might help control better, but that also adds more weight. Please , Any suggestions????
     
  2. Jul 29, 2015 at 6:42 PM
    #2
    csuviper

    csuviper Moderator Staff Member

    Joined:
    Jan 6, 2014
    Member:
    #38
    Messages:
    17,283
    Gender:
    Male
    First Name:
    Brian
    Broomfield, CO
    Vehicle:
    2019 TRD Sport CM 5.7L 4X4
    Some Mods :) See build thread for details
    Welcome. Have you looked into the TRD rear sway bar for the truck. Good feedback from some on here as far as handling goes.
     
  3. Jul 29, 2015 at 6:43 PM
    #3
    bjnbsullivan

    bjnbsullivan [OP] New Member

    Joined:
    Jul 29, 2015
    Member:
    #1581
    Messages:
    6
    Gender:
    Male
    First Name:
    Bennie
    Vehicle:
    2012 toyota tundra
    what is the TRD rear sway bar? i Have a friction sway control on it. is this something different?
     
  4. Jul 29, 2015 at 7:03 PM
    #4
    George14

    George14 New Member

    Joined:
    Jul 30, 2014
    Member:
    #527
    Messages:
    387
    Gender:
    Male
    First Name:
    George
    West Virginia
    Vehicle:
    2014 Tundra SR5 Dc TRD Off Road 5.7L with tow package
    None
    It is a bar that hooks to fram and axel. I got 2014 TRD with tow has the sway bar pull a 7400 lbs TT pulls no trouble at all post picture tomorrowImage from here's a link to a picture I googled 019_cc26538c58b13fb06fbcd5d1090606079109a88c.jpg.
     
    Last edited: Jul 29, 2015
  5. Jul 29, 2015 at 7:04 PM
    #5
    bjnbsullivan

    bjnbsullivan [OP] New Member

    Joined:
    Jul 29, 2015
    Member:
    #1581
    Messages:
    6
    Gender:
    Male
    First Name:
    Bennie
    Vehicle:
    2012 toyota tundra
    ok thanks, i may check into that
     
  6. Jul 29, 2015 at 7:05 PM
    #6
    bjnbsullivan

    bjnbsullivan [OP] New Member

    Joined:
    Jul 29, 2015
    Member:
    #1581
    Messages:
    6
    Gender:
    Male
    First Name:
    Bennie
    Vehicle:
    2012 toyota tundra
    if it is installed on the truck, how does it help control of the trailer?
     
  7. Jul 29, 2015 at 7:22 PM
    #7
    Relentless

    Relentless Eric @Relentless Fab Vendor

    Joined:
    Jan 6, 2014
    Member:
    #19
    Messages:
    899
    Gender:
    Male
    First Name:
    Eric
    East of the Sierras(Reno), Nevada
    Vehicle:
    '14 Crewmax TRD 4x4> '15 Duramax SLT
    Just a few, more to come
    Sounds like you need to either
    A) distribute load in the trailer better? Do you have proper tongue weight?
    B) Crank down on the trailer sway control a bit harder
     
    Ancient1, jlee and zcarpenter92 like this.
  8. Jul 29, 2015 at 7:28 PM
    #8
    bjnbsullivan

    bjnbsullivan [OP] New Member

    Joined:
    Jul 29, 2015
    Member:
    #1581
    Messages:
    6
    Gender:
    Male
    First Name:
    Bennie
    Vehicle:
    2012 toyota tundra
    relentless, are you saying to tighten the friction sway control harder? i am new to all this, and was told to tighten it, then back off 1/4 turn. that tightening it too much would mess it up.?? i also have a weight distributing hitch, should i try another link in the chain maybe?
     
  9. Jul 30, 2015 at 3:18 AM
    #9
    TODDK

    TODDK New Member

    Joined:
    Jun 1, 2015
    Member:
    #1365
    Messages:
    60
    Gender:
    Male
    First Name:
    Todd
    Hibbs, PA
    Vehicle:
    2014 Tundra TRD
    6" lift sitting on 20x10x-24 wrapped with 35 MTs
    Sounds like you have too much tongue weight. Try loading the trailer different... if you loaded more in the front move towards the back.
     
  10. Jul 30, 2015 at 4:10 AM
    #10
    cpconst

    cpconst New Member

    Joined:
    Jul 5, 2015
    Member:
    #1489
    Messages:
    21
    Gender:
    Male
    First Name:
    Corey
    ^ He means not enough tongue weight. This will defiantly unsettle the trailer at speed.
     
  11. Jul 30, 2015 at 5:54 PM
    #11
    bjnbsullivan

    bjnbsullivan [OP] New Member

    Joined:
    Jul 29, 2015
    Member:
    #1581
    Messages:
    6
    Gender:
    Male
    First Name:
    Bennie
    Vehicle:
    2012 toyota tundra
    ok i may have 1-200 lbs tops stored in the front of the trailer. it also has two propane tanks and a battery mounted on the tongue of the trailer. my water tanks are located right behind the axles but i keep them empty when towing. i've been told by a lot of other people than i need a 3/4 ton or bigger, that the tundra is overweighted and even though its pulling fine, it is too dangerous and a accident waiting to happen. Any comments or advise as to whether a larger truck would help or if its definantly my trailer or setup.??? i hate to buy a bigger truck and it not help or do the same thing. what i do know is, I bought this trailer about 2 hours from my house and it gave me this trouble the first time i pulled it home and it was empty then, so dont really think its my load..... help
     
  12. Jul 30, 2015 at 7:08 PM
    #12
    bobeast

    bobeast really old member

    Joined:
    Feb 11, 2015
    Member:
    #960
    Messages:
    1,525
    Gender:
    Male
    First Name:
    Bob
    Hollister, CA
    Vehicle:
    2008 DC
    - Bull Bar - LED Bunny Burners - AMP retractable running boards - Headlight leveling retrofit - P3 Brake Controller - 60% rear seat delete - relocation of Sub to rear wall - Bilstein 5100 x4, top setting with 2 shims per side - Coach builder +2 rear shackles w/carrier bearing drop - Firestone Air bags - on-board compressor with auto-leveling - Dual Undercover Swing Boxes. - P285/65/R20 (34.6") BFG TA KO2's - TRD Front skid plate - Pop & Lock Tailgate lock - Remote Tailgate mod - LED Headlights - Nav Bypass - iPhone integration - Serius/XM retrofit - 25% front tint - Bizon electric tonneau cover - Power folding tow mirror upgrade - 2010+ leveling Headlight mod - Auto-fold mirror mod. - one-touch lane changer mod - Flash to open garage opener mod - Rigid H/L fog light upgrade - Pushbutton / Remote start mod.
    Here is an excellent article on sway controls and WD hitches.

    http://www.etrailer.com/faq-weightdistribution.aspx#SwayControl

    Off hand it sounds like your torsion bars are not tight enough and/or Your trailer is unbalanced. Are both your truck and trailer level when your'e fully loaded? Air springs can help if not, but they are not intended to allow you to overload the hitch. Try going up one link on the torsion bar chains, and shifting weight in your trailer towards the front or back. If you are carrying heavy stuff in the bed, consider moving it to the trailer, centered over the trailer's axels.

    Finally, I've heard that friction ant-sway devices are not as effective as active or hydraulic ones. You my end up having to upgrade.
     
    Last edited: Jul 30, 2015
    zcarpenter92 and MotoTundra like this.
  13. Jul 30, 2015 at 7:17 PM
    #13
    Southern

    Southern New Member

    Joined:
    Jun 28, 2015
    Member:
    #1464
    Messages:
    22
    Gender:
    Male
    First Name:
    JP
    SC
    Vehicle:
    2015 Tunda CM 4X4 XP
    TRD sway bar. Very happy with it.
     

    Attached Files:

    stujaspermma likes this.
  14. Jul 30, 2015 at 7:22 PM
    #14
    Relentless

    Relentless Eric @Relentless Fab Vendor

    Joined:
    Jan 6, 2014
    Member:
    #19
    Messages:
    899
    Gender:
    Male
    First Name:
    Eric
    East of the Sierras(Reno), Nevada
    Vehicle:
    '14 Crewmax TRD 4x4> '15 Duramax SLT
    Just a few, more to come
    Yes that's what I'm referring to. What I will say is that everyones feel and idea of 'tight' is a bit different. What you may think is tight may really not be, I know with my trailer (20ft car trailer w/lifted 4runner on it) when I dont tighten my sway control hard enough I know real quick! A half or full turn on the handle and I'm back tracking solid on the freeway. I've had the truck trailer well into the 80's (in states that allow for it ;)) without any sway or instability.
     
  15. Sep 9, 2015 at 9:56 PM
    #15
    2015 LIMITED CREWMAX 4X4

    2015 LIMITED CREWMAX 4X4 New Member

    Joined:
    Sep 9, 2015
    Member:
    #1789
    Messages:
    29
    Gender:
    Male
    First Name:
    Glenn
    Vehicle:
    2015 Tundra Limited TRD 4wd crew max.
    Bed cover, spray in bedliner, tinted windows, black coating on wheels, blacked out grill and all other badges, 2.5" front leveling kit, rear Firestone air bags.
    I'm a little late to the conversation but I tow a 31' 6500 lb ( dry weight) travel trailer and don't have a side to side sway issue as much as I have a front to back bounce going over any bumps in the road. I have the sway control hitch that seems to work good but had to add a set of air bags on the truck to make it a little stiffer in the back. Bounce is gone now and the truck does fine when the trailer is loaded and closer to 7500-8000 lbs.
     
    MotoTundra likes this.
  16. Mar 7, 2016 at 3:45 AM
    #16
    MillsTRD14

    MillsTRD14 New Member

    Joined:
    Mar 4, 2016
    Member:
    #2833
    Messages:
    107
    Gender:
    Male
    First Name:
    Aaron
    Vehicle:
    2014 Tundra TRD
    Ba mufflers 7 inch, Bilstein 5100 TRD strut bar, Firestone adjustable ride rite airbags, tow mirrors , BFGoodrich ta ko2 33s, TRD shift knob, blacked out emblems, tundra Pro grill......
    This is exactly what I did , I installed the TRD sway bar and I had no sway at 70 mph ...just testing speed ...but I did install a set of Firestone Ride rites which is awesome because as your trailer weight changes you can change your pressures to match .
     
    MotoTundra likes this.
  17. Mar 7, 2016 at 6:12 AM
    #17
    MotoTundra

    MotoTundra The Ocho

    Joined:
    Jan 6, 2014
    Member:
    #8
    Messages:
    7,645
    Gender:
    Male
    First Name:
    Don
    -TRS Mini D2S Retrofit on TRD Pro Headlights (Apollo 2.0 Shrouds, 35w XB Ballasts, 5500k Bulbs) -Baja Designs Squadron R Sport Aux lights. -TRD Pro Grill -TRD Rear Sway Bar -BakFlip VP Tonneau w/BakBox -Dipped wheels & bumpers -Iron Cross HD steps -Undercover Swingcase -SunTek Paint Protection film -Tinted glass -Bedmat -OEM Towing Mirrors
    I'm not OP, bit thanks for the responses, lots of good info!
     
  18. Mar 7, 2016 at 12:12 PM
    #18
    alalmcgrath

    alalmcgrath Old Fart at Large!

    Joined:
    Aug 11, 2015
    Member:
    #1646
    Messages:
    214
    Gender:
    Male
    First Name:
    Al
    Boulder Creek Ca
    Vehicle:
    2016 SEQUOIA SR5
    None yet
    I don't think a TRD sway bar would help much. The sway bar is to keep the TRUCK level from side to side when going around turns. I am no towing expert but a 34 foot trailer is awfully large for a 1/2 ton, regardless of weight capacity.
     
  19. Apr 23, 2016 at 8:37 AM
    #19
    jfrd30

    jfrd30 Lead, Follow, or Get the Hell Out of My Way

    Joined:
    Jan 21, 2016
    Member:
    #2496
    Messages:
    701
    Gender:
    Male
    First Name:
    Mike
    Vehicle:
    2013 TRD Tundra
    BJ, when you set up your rig, did you measure the ground to fender height before and after hooking up your trailer? It is EXTREMELY important to set up your weight distribution hitch correctly. If not, you could have way too much weight sitting on your hitch causing the front wheels to be light and make the ride feel squirrely.
     
  20. Apr 23, 2016 at 9:59 AM
    #20
    bobeast

    bobeast really old member

    Joined:
    Feb 11, 2015
    Member:
    #960
    Messages:
    1,525
    Gender:
    Male
    First Name:
    Bob
    Hollister, CA
    Vehicle:
    2008 DC
    - Bull Bar - LED Bunny Burners - AMP retractable running boards - Headlight leveling retrofit - P3 Brake Controller - 60% rear seat delete - relocation of Sub to rear wall - Bilstein 5100 x4, top setting with 2 shims per side - Coach builder +2 rear shackles w/carrier bearing drop - Firestone Air bags - on-board compressor with auto-leveling - Dual Undercover Swing Boxes. - P285/65/R20 (34.6") BFG TA KO2's - TRD Front skid plate - Pop & Lock Tailgate lock - Remote Tailgate mod - LED Headlights - Nav Bypass - iPhone integration - Serius/XM retrofit - 25% front tint - Bizon electric tonneau cover - Power folding tow mirror upgrade - 2010+ leveling Headlight mod - Auto-fold mirror mod. - one-touch lane changer mod - Flash to open garage opener mod - Rigid H/L fog light upgrade - Pushbutton / Remote start mod.
    1) is the trailer level? Having a trailer sit nose up will remove tongue weight and cause sway
    2) Is the truck level? A sagging rear will pull up on the front of the truck providing mushy steering control.
    3) Are the torsion bars tight enough? (contributes to # 2.
    4) Do you have enough tongue weight? look for ~12% - 15% of the trailer weight to sit on the ball before torsion bars are connected.
    5) If using a friction anti-sway device, is it tight enough? It does no good if it is too loose.
     
    Last edited: Apr 23, 2016
    Ancient1 likes this.
  21. Apr 23, 2016 at 1:33 PM
    #21
    jfrd30

    jfrd30 Lead, Follow, or Get the Hell Out of My Way

    Joined:
    Jan 21, 2016
    Member:
    #2496
    Messages:
    701
    Gender:
    Male
    First Name:
    Mike
    Vehicle:
    2013 TRD Tundra
    1461443361855682329289.jpg
    I'm towing this hog and yes, I just took this pic! Aaaaaaaah.
     
  22. Apr 23, 2016 at 4:35 PM
    #22
    AMRE2ME2

    AMRE2ME2 New Member

    Joined:
    Aug 3, 2015
    Member:
    #1609
    Messages:
    232
    Gender:
    Male
    Colorado
    Vehicle:
    2016 DC 4x4 Limited TRD
    I just went to Tucson this week and picked up a 30' 6500 lb. TT. I am using an Equal-I-zer WD and sway control hitch. (I highly recommend this hitch). No sway bar on truck. (They don't help trailer sway at all.) Average speed on trip was 70-75. Trailer never moved at all. The weight distribution in the trailer is very important. Most swaying is caused by too much weight in the rear.
    Read bobeast post above, it is right on.
     
  23. Apr 23, 2016 at 11:56 PM
    #23
    Red Freighter

    Red Freighter Red Freighter

    Joined:
    Jan 14, 2016
    Member:
    #2447
    Messages:
    206
    Gender:
    Male
    First Name:
    Fred
    Oregon City
    Vehicle:
    2013 double cab sr5 trd red
    2014 TRD wheels and TRd pro center caps. Stock 2014 running boards. Stereo gps dvd deck two 12" subs w/amp. Dvd Headrests. Rear air bags with compressor and air tank.
    I would not recommend going by what the dealer claims the weight to be or the tag in the closet. You can drive thru a closed weight station and a lot of the time they have a digital read out. Go thru it without your trailer and then with it and then with only you trailer's wheels only on the scales. Minus the trailer weigh and the truck weight from the combined weight to get your tongue weight. I believe your anti sway is tight enough, but look at your hitch to see if you can run two anti sway bars. I run air bags. Tire pressure can be a factor also(truck and trailer). Check your trailer's wheel alignment. Talk to your RV dealer. I agree with the other post.
     
    Last edited: Apr 24, 2016
    Ancient1 likes this.

Products Discussed in

To Top