Help with wheels and tires

I’ve just picked up a new (used) set of tires and am looking for some rims to match, JEGS sells a good cheap pair of steelies and by my calculations they shouldn’t have a problem fitting but I’m no tire guy! So the specs for the tire are 32/11.5/R15 and the rims in question are a 15-10” with a 4” backspace and -38 offset, I also have 2” spacers and a 3” leveling kit on the truck!
If anyone is a tire and wheel guy and could help me out that would be great!

 

I was looking at 15” rims for mine as well last year and came to my own conclusion they won’t fit around the brake calipers. Even though companies make 15s in our lug pattern, when I looked at my factory 16s I had about a half inch between the calipers and inside of the wheel. According to my calculations, a 15” ain’t goin on.

 

15's wont work. 16 or bigger.

 

So even with the -37 offset and 2” spacers it won’t fit? In my head it seemed like the rim would be pushed far enough out to avoid touching?

 

Not the way I imagine it. A section of the rim has to go over the brake assembly and 15s won’t allow it.

 

Plus it looks like that wheel is a 6 lug, our trucks are 5 lug.

 

Hes talking about a first gen tundra. They're 6 lug.

 

There's a guy in Hawaii that has 38 inch Baja claws on 15x10 rims on a first gen tundra. BUT!!!! Hes solid axle swapped.

 

Thanks for all the help guys! And yes I was talking about my first Gen and it’s a 6 bolt! Looks like I’ll have to re think my setup but I’m glad y’all saved me before I committed!