FS: 2018 Tundra LED Headlights Plug N Play wire Harness for 2014-2017 models

Yah, I'll just stick with the XBs for now.

 

That's why I bit the bullet and just went OEM for both headlights and fogs. Love the new light output and the color matches nicely of course.

 

Got any pics of the fog lights?

 

here they are on my truck..

 

That truck is sexy I like the complete bumper color match I guess is for Platinums only right?

 

I have seen a few 1794s and they still have Chrome bumper ends

 

Is yours a Platinum/PRO like TundraDude34? Man that guy love spending money in that beast supercharged truck

 

These won’t be as good as a dedicated aftermarket fog housing for proper light dispersion but you can’t beat the price, and cosmetically they are pretty close at 6000K to 2018 LED headlights. Theoretical 80W, actual=8W so much less than stock 35W in terms of heat risk. I’ve had them in for the better part of the year, require no mods to install, just exchange the bulb, same fitting. We’ve only had a couple of foggy days since last summer, your area may require better fog lights, ymmv.

https://www.ebay.ca/ulk/itm/162835175917

 

Thanks! Yes, she's a Platinum and I changed out grille to the Pro, the shocks are TRD Pro shocks (leveled the way a Pro is), the wheels are TRD and have color matched mirror caps and door handles.

 

That’s a nice price but I’m my case if just changing the bulb I will take this any time over aftermarket bulbs

Philips 12834UNIX2 X-tremeVision LED Fog Light, Fits Fog H8, H11, H16, 2 Pack

Philips 12834UNIX2 X-tremeVision LED Fog Light, Fits Fog H8, H11, H16, 2 Pack

https://www.amazon.com/dp/B00U2NHLTI/ref=cm_sw_r_sms_c_api_jVNVAbGRK1ASS

 

Installing these on a 2015 SR5 here shortly - is there anything else required besides the Ihack harness, the 2018 Headlights, and the motocontrol?

Do I need any electrical tools? 12v Light? Quick Splice?
I watched the videos and taping into the main power source scares me a bit.
I’d rather swap an axle than deal with electrical.

 

You'll need a bolt+nut to attach the Motocontrol somewhere if not attaching to the battery side, and plastic ties to clean up the wires.

No electrical tools, it's all plug and play, attaching grounds to existing bolts. Only the driver's side main headlight plug is plugged into the OP's bulb input prong. There is no prong on the passenger side, and the main headlight plug there from the truck is left naked (tape it up).

It's all pretty straightforward, positive to positive battery terminal. And removing the right 10A fuse (pictured), plug in the fuse tap where it was, replace the fuse box cover.

You don't need a light working in the day. And aim your new headlights before putting it all back together. If you forget or need to make fine adjustments, you can still do it afterward through the funnel.

 

Perfect! I do have zip ties. The fuse tap was already under there? Okay cool!
I just popped on a new color matched bulge and I’m taking the grill off now to start on the lights. Thank you!

 

Ya, it's basically remove fuse, put in fuse (tap).

I'm not sure which video you're watching but I used painter's tape to avoid scratching anything. And large towels to rest the headlights.

All those black rivets, pop up the centre with a screwdriver and they'll slide out.

 

Just figured out those rivets! LOL

 

Is running the headlight plugs down lower okay or will I run out of wire? I plan on a aftermarket front bumper install soon so I don’t want to run against the bumper. Doesn’t look like much wire is left at each headlight though.

 

Not sure, maybe complete all the connections and make sure everything works before the cable management. My wires are behind my LED bar, you can see where I tied it to the center column. Excited for you, the headlights are my #1 favorite mod.

 

I gave it enough wire to route the wires under that lower plate or you can run the wires above the horns area

 

All like he said except for this part this is not required in any of my harnesses

“imho, the hardest part is the truck's signal harness, pulling out the purple wire/pin, and putting the black/white wire into where purple was without wrecking anything. A tiny flatheadscrewdriver is helpful to move the clip so the pins pull out.”

For this part I use this:






Everything under the hood is Plug N Play with my harness

 

OMG I’m freaking out LOL.
I need to watch the video again....
If the max was a 4hr install, I’m going to be the 6hr guy LOL

 

Thank you guys for the help!!!!!

 

Really simple install I know scare the shit out seeing all those wires but when you start doing this is pretty straight forward nothing to worry about

 

I’m just finishing up the Motocontrol install then off to an Easter egg hunt for the kids. I’ll be back at it in 4hrs or so.

 

I hope you’re right - the inside of the cab - ugh. LOL

 

Me too

 

Is everyone doing a coat hanger through the firewall?

 

You're killing me iH lol, I should have bought yours! Edited my post, cheers!

btw, we went this morning and my wife won a $50 bag of gardening stuff at the Easter hunt, woot!

 

What's through the firewall?

My LED light bar switch is but nothing with the 2018 headlights, DRL switch perhaps?